期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
孔口面积及热源位置对热压通风影响的模拟研究 被引量:2
1
作者 朱尚斌 李灿 陈泉 《湖南工业大学学报》 2017年第5期39-44,共6页
利用流体力学计算软件Airpak对单热源民用建筑房间的热压通风进行了模拟。给定热源体总热量,在改变上下部孔口面积比例的情况下,分析各模拟情况下室内热压通风的中和面高度、有效热量系数、通风量及排出余热量等特征参数的变化规律;在... 利用流体力学计算软件Airpak对单热源民用建筑房间的热压通风进行了模拟。给定热源体总热量,在改变上下部孔口面积比例的情况下,分析各模拟情况下室内热压通风的中和面高度、有效热量系数、通风量及排出余热量等特征参数的变化规律;在孔口大小固定的情况下,研究热源体水平位置同孔口间距改变时热压通风的室内温度场、流场、热源表面温度等参数的变化规律。研究结果表明:上下部孔口开口面积相差不大时,房间内的热压通风效率最佳;下部孔口面积略大于上部孔口面积时,有效热量系数m处于较低的范围内,且增大某一孔口面积,中和面会朝着该孔口方向移动;热源体越靠近下部孔口,越有利于热源散热。 展开更多
关键词 热压通风 中和面 有效热量系数 热源体温度
下载PDF
Parametric optimization and performance comparison of organic Rankine cycle with simulated annealing algorithm 被引量:3
2
作者 王志奇 周乃君 +2 位作者 张家奇 郭静 王晓元 《Journal of Central South University》 SCIE EI CAS 2012年第9期2584-2590,共7页
Taking the ratio of heat transfer area to net power and heat recovery efficiency into account, a multi-objective mathematical model was developed for organic Rankine cycle (ORC). Working fluids considered were R123,... Taking the ratio of heat transfer area to net power and heat recovery efficiency into account, a multi-objective mathematical model was developed for organic Rankine cycle (ORC). Working fluids considered were R123, R134a, R141b, R227ea and R245fa. Under the given conditions, the parameters including evaporating and condensing pressures, working fluid and cooling water velocities were optimized by simulated annealing algorithm. The results show that the optimal evaporating pressure increases with the heat source temperature increasing. Compared with other working fluids, R123 is the best choice for the temperature range of 100--180℃ and R141 b shows better performance when the temperature is higher than 180 ℃. Economic characteristic of system decreases rapidly with the decrease of heat source temperature. ORC system is uneconomical for the heat source temperature lower than 100℃. 展开更多
关键词 parametric optimization organic Rankine cycle simulated annealing algorithm working fluid low-temperature source
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部