A novel and environmentally friendly route to directly prepare metallic vanadium from NaV03 by molten salt electrolysis is proposed. The feasibility about the direct electro-reduction of NaV03 to metallic vanadi- um i...A novel and environmentally friendly route to directly prepare metallic vanadium from NaV03 by molten salt electrolysis is proposed. The feasibility about the direct electro-reduction of NaV03 to metallic vanadi- um is analyzed based on the thermodynamic calculations and experimental verifications. The theoretical decomposition voltage of NaV03 to metallic vanadium is only 0.47 V at 800 ℃ and much lower than that of the alkali and alkali earth metal chloride salts. The value is slightly higher than that of low-valence vanadium oxides such as V203, V305 and VO. However, the low-valence vanadium oxides can he further electro-reduced to metallic vanadium thermodynamically. The thermodynamic analysis is verified by the experimental results. The direct preparation of metallic vanadium from NaV03 by molten salt electrolysis is feasible.展开更多
The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were com...The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were comparatively investigated. The results show that the Ti existing in ELTA without Al-4B addition exhibits a certain grain refining efficiency when the melt superheating temperature is lower,but the efficiency decreases rapidly when the superheating temperature is higher.The grain refining efficiency of the Al-5Ti-1B master alloy is better than that of the Ti existing in ELTA without Al-4B addition at any superheating temperature,but it also decreases obviously with the increase of the superheating temperature.One important reason is that the TiB2 particles coming from the Al-5Ti-1B master alloy can settle down at the bottom of the Al melt easily when the superheating temperature is increased,thus decrease the number of the potent heterogeneous nuclei retained in the Al melt.If the Al-4B master alloy is added to the ELTA melt,the grain refining efficiency of the Ti existing in ELTA can be improved significantly, and does not decrease with the increase of the superheating temperature.This perhaps provides us a possible method to suppress the effect of the superheated melt on the microstructures of aluminum..展开更多
基金Supported by the National Basic Research Program of China(2013CB632606)the National Natural Science Foundation of China(51474200)+1 种基金the Youth Innovation Promotion AssociationCAS(2015036)
文摘A novel and environmentally friendly route to directly prepare metallic vanadium from NaV03 by molten salt electrolysis is proposed. The feasibility about the direct electro-reduction of NaV03 to metallic vanadi- um is analyzed based on the thermodynamic calculations and experimental verifications. The theoretical decomposition voltage of NaV03 to metallic vanadium is only 0.47 V at 800 ℃ and much lower than that of the alkali and alkali earth metal chloride salts. The value is slightly higher than that of low-valence vanadium oxides such as V203, V305 and VO. However, the low-valence vanadium oxides can he further electro-reduced to metallic vanadium thermodynamically. The thermodynamic analysis is verified by the experimental results. The direct preparation of metallic vanadium from NaV03 by molten salt electrolysis is feasible.
文摘The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were comparatively investigated. The results show that the Ti existing in ELTA without Al-4B addition exhibits a certain grain refining efficiency when the melt superheating temperature is lower,but the efficiency decreases rapidly when the superheating temperature is higher.The grain refining efficiency of the Al-5Ti-1B master alloy is better than that of the Ti existing in ELTA without Al-4B addition at any superheating temperature,but it also decreases obviously with the increase of the superheating temperature.One important reason is that the TiB2 particles coming from the Al-5Ti-1B master alloy can settle down at the bottom of the Al melt easily when the superheating temperature is increased,thus decrease the number of the potent heterogeneous nuclei retained in the Al melt.If the Al-4B master alloy is added to the ELTA melt,the grain refining efficiency of the Ti existing in ELTA can be improved significantly, and does not decrease with the increase of the superheating temperature.This perhaps provides us a possible method to suppress the effect of the superheated melt on the microstructures of aluminum..
