Performances of Flat Plate Pulsating Heat Pipes

Flat plate pulsating heat pipe is useful for hot spot heat spreader. Two kinds of flat plate spreader of pulsating heat pipe are designed, fabricated and experimented. For the embedded circular capillary type, the transferred heat flux could reach 32 W/cm2, the smallest thermal resistance for acetone, methanol and FC-72 were respectively 0.50, 0.57 and 0.40℃/W. While for the square capillary type, the transferred heat flux could reach 26 W/cm2, the equivalent thermal conductivity could reach 3211 W/（m. ℃）. There are ranges of optimal transferred power and filling ratio for different working liquid. If the transferred power is constant, changing the heating area and the place has little effects on the performance.

基于热管技术的飞机电作动机构散热特性

针对飞机电作动机构在工作过程中发热严重的情况,开展了相关散热技术研究。利用试验数据拟合出电作动机构产热量的经验关系式,提出基于热管-燃油系统的飞机电作动机构冷却方法,建立描述电作动机构散热系统流动与传热过程的数值模型,并验证了其可靠性。通过数值模拟研究不同因素对散热系统散热性能的影响规律,结果表明:数值模拟与试验误差在14.6%以内;与自然对流散热相比,热管-燃油散热方式可使电作动器温升降低12.61%,对于驱动器,风扇冷却效果优于热管-燃油散热方式;当热管等效导热系数达到7000 W/(m·K),电作动机构已达到较好的散热状态,继续增大热管等效导热系数对提高散热系统散热性能效果不明显。研究可为电作动机构高效散热系统的设计提供参考。