新时代下热能与动力机械制造工艺学课程思政教学改革与实践

理工科专业的课程思政教学是实现全员育人、全程育人、全方位育人的重要途径。热能与动力机械制造工艺学作为能源动力类专业的核心课程之一,在新时代背景下其思政建设显得尤为重要。该文围绕热能与动力机械制造工艺学课程,分析当前该课程教学中存在的问题;通过深入挖掘课程中的思政元素,将其有机融入教学内容和教学方法中,探讨课程思政存在问题的解决方案,并介绍该课程思政建设的实践成效。研究表明,深入挖掘专业课程的思政元素并将其融入教学,能够提升学生的思想道德素质、民族自豪感、社会责任感、历史使命感,同时也可促进学生对专业知识的学习。该文为新时代下能源动力类专业课程思政建设提供理论依据和实践指导。

基于MATLAB的热能动力机械测控技术课程教学方法研究

文章主要是针对我校热能与动力工程专业学生学习测控技术课程过程中遇到的问题进行了探讨。结合MATLAB软件数值计算和图形处理功能,不断改进教学方法和手段。将MATLAB软件应用于热能动力机械测控技术课程理论与实践教学,不仅提高了学生学习主动性和积极性,而且培养了学生的创新能力,逻辑思维能力,以及工程应用能力。

热能工程与动力机械专业21世纪初教学计划制订的思路

对热能工程与动力机械专业教学计划制订的基础和环境条件进行分析 ,并制订出符合社会要求 。

感应式机械热能表与双表计量法

本文提出了一种利用流量分流补偿的原理制成的机械式热能表及与之对应的双表计量法。此机械热能表无任何电子元件,造价低,性能稳定,适用环境能力强,压损小,而且防盗水,具有很大的推广价值。

热能动力机械现状及其发展分析

经济的高速发展给许多行业都带来了活力,热能动力机械行业也是如此。热能动力机械在我国许多行业中都有较为广泛的应用,并且为经济发展做出巨大贡献。但是近年来科学技术发展较快,传统的热能动力机械已经不能满足市场发展的需求,必须对其进行完善。从当前我国热能动力机械的发展现状入手,详细分析其中影响热能动力机械发展的问题,展望其未来发展方向。

热能动力机械现状及其发展浅述

国民经济和科技不断进步,带动热能动力机械快速发展,人们对热能动力的要求越来越高,一定程度上,促使热能动力机械持续健康发展,但是热能动力机械实际发展过程中,仍然存在很多问题,需要正确认识热能动力机械现状,探索未来发展趋势,为热能动力机械更好的发展奠定基础。基于此,文章主要阐述了热能动力机械现状,以及未来发展趋势,希望为更多业界人士提供有效建议,促使热能动力机械得到推广和运用。

Corrosion behavior of 2A97 Al-Cu-Li alloys in different thermomechanical conditions by quasi-in-situ analysis

As a promising material in the aircraft industry,2A97 Al-Cu-Li alloy exhibits high corrosion susceptibility that may limit its application.In the present work,to illustrate the influences of precipitate and grain-stored energy on localized corrosion evolution in 2A97 Al-Cu-Li alloy,cold working and artificial aging were carried out to produce 2A97 Al-Cu-Li alloys under different thermomechanical conditions.Quasi-in-situ analysis,traditional immersion test and electrochemical measurement were then conducted to examine the corrosion behavior of 2A97 alloys.It is revealed that precipitate significantly affects Cu enrichment at corrosion fronts,which determines corrosion susceptibility of alloys,whereas grain-stored energy distribution is closely associated with localized corrosion propagation.It is also indicated that quasi-in-situ analysis exhibits a consistent corrosion evolution with traditional immersion tests,which is regarded as a proper method to explore localized corrosion mechanisms by providing local microstructural information with enhanced time and spatial resolutions.

Influence of addition of B_2O_3 on properties of Yb^(3+)-doped phosphate laser glass

The three host glasses doped with Yb 3+ were prepared by means of conventional melt quenching technology, and the influence on physical and spectral properties of phosphate glass due to addition of B2O3 was investigated and compared with silicate glass. The results show that due to the existence of OH- impurities which induce the non-radiative route, the fluorescence lifetime of phosphate glass is shorter, so silicate glass has better spectral properties than phosphate glass. Silicate glass has more excellent thermal-mechanical properties than phosphate glass, but with the addition of B2O3, thermal-mechanical properties of phosphate glass are improved greatly without fluorescence quenching effect, and this kind of borophosphate glass will be the candidate to be used in high average power solid state laser.

Transformation of β to α phase of isotactic polypropylene nucleated with nano styrene butadiene rubber-based β-nucleating agent under microwave irradiation

This paper investigates the effect of microwave irradiation on theβtoαphase transformation of theβ-nucleated isotactic polypropylene(iPP).Ten microwave irradiation cycles was applied to the iPP and iPP modified with 0.3 wt%and 0.5 wt%β-NA,and the data at 2nd,4th,6th,8th and 10th irradiation were reported.As expected,the sample temperature was found to increase with the irradiation time,by more than 130°C,due to high frequency of microwave processing.This was the major factor that induced theβ-phase transformation and structural change.Both the differential scanning calorimetry(DSC)and X-ray diffraction(XRD)results indicated thatβ-phase was mainly transformed toα-phase and partially converted to the amorphous section.It was reflected as 1)the reduction of the enthalpy ofβ-crystal melting(ΔHmβ),2)the increased enthalpy ofα-crystal melting(ΔHmα),3)the decreasedβ-crystalline phase fraction(Kβ)and 4)the decrease of the overall degree of crystallinity(Xall).Under impact force,neat iPP showed a slight increase in the impact strength with the irradiation time,due to the increase of amorphous region.For theβ-iPP,it decreased due to the reduction of theβ-phase content.

Anti-seismic behavior of HRB400 reinforced steel bars

The properties of anti-seismic HRB400 steel bars with 25 mm diameter were systematically investigated. The results showed that the properties of the HRB400 reinforced steel bars had been greatly enhanced comparing with HRB335 steel bars, i.e. coordination of strength and ductility, strain-aging sensibility, low temperature impact toughness, weld ability and high strain low cycle fatigue. The ductile-brittle transit temperatures of hot-rolled and strain-aged steel bars were evaluated as –17 °C and ?8 °C respectively, and the low temperature impact toughness of HRB400 steel bars remains to be improved. Transmission electron microscopy (TEM) and electron diffraction showed little vanadium existed in ferrite as VN, most of which existed in pearlite as alloy cementite which resulted in the declination of impact toughness. Methods were suggested to improve the anti- seismic properties of steel bars.

Thermal-mechanical properties of short carbon fiber reinforced geopolymer matrix composites subjected to thermal load

Short carbon fiber preform reinforced geopolymer composites containing different contents of α-Al2O3 filler （Cr（a-Al2O3）/geopolymer composites） were fabricated, and the effects of heat treatment temperatures up to 1 200 ℃ on the thermal-mechanical properties were studied. The results show that the thermal shrinkage in the direction perpendicular to the lamination of the composites gradually increases with the increase of the heat treatment temperatures from room temperature （25 ℃ ） to 1000 ℃. However, the composites in the direction parallel to the lamination show an expansion behavior. Beyond 1 000℃, in the two directions the composites exhibit a larger degree of shrinkage due to the densification and crystallization. The mechanical properties of the composites show the minimum values in the temperature range from 600 to 800 ℃ as the hydration water of geopolymer matrix is lost. The addition of α-Al2O3 particle filler into the composites clearly increases the onset crystalline temperature of leucite （KAlSi2O6） from the amorphous geopolymer matrix. In addition, the addition of α-Al2O3 particles into the composites can not only help to keep volume stable at high temperatures but also effectively improve the mechanical properties of the composites subjected to thermal load to a certain extent. The main toughening mechanisms of the composites subjected to thermal load are attributed to fiber pulling-out.

Fabrication of FeAl/TiC composites through reactive hot pressing

FeAl/TiC composites were fabricated by reactive hot pressing blended elemental powders. The TiC content was varied from 50% to 80%(volume fraction) and the aluminum content in the binder phase was changed from 40% to 50%(mole fraction). The effects of these compositional changes on the densification process and mechanical properties were studied. The results show that with the increase of TiC content, densities of the composites decrease due to insufficient particle rearrangement aided by (dissolutionreprecipitation) reaction during hot pressing. Closely related with their porosities and defect amount, the hardness and bend strength of the composites show peak values, attaining the highest values with TiC content being 70% and 60%, respectively. Increasing the aluminum content is beneficial to the densification process. But the hardness and bend strength of the composites are reduced to some extent due to the formation of excessive oxides and thermal vacancies.

Perturbation to Noether-Lie Symmetry and Adiabatic Invariants for Mechanical Systems in Phase Space

Based on the concept of adiabatic invariant,the perturbation to Noether-Lie symmetry and adiabatic invariants for mechanical systems in phase space are studied.The criterion of the Noether-Lie symmetry for the perturbed system is given,and the definition of the perturbation to Noether-Lie symmetry for the system under the action of small disturbance is presented.Meanwhile,the Noether adiabatic invariants and the generalized Hojman adiabatic invariants of the perturbed system are obtained.

热机碎岩技术研究

本文介绍了一种非常规碎岩方法——热机碎岩法的碎岩机理、碎岩工具以及工艺等,深入认识了该技术与传统机械碎岩的区别。该工艺利用钻头与岩石摩擦所产生的大量热量,使岩石的内部结构在高温下发生物理或化学变化,进而使岩石强度和磨蚀性显著降低。热机碎岩钻进技术是切实可行的,能提高钻进效率,降低钻进成本。

The Development of Thermal Conductive Polymer Composites for Heat Sink

The thermal and mechanical properties of the polyamide 6/boron nitride and polyphenylene sulfide/graphite composites have been investigated as a function of composition and size of fillers. The addition of highly thermal conductive h-BN and graphite gives rise to large increase （about 2 times） of thermal conductivity of individual polymer. In PPS/graphite system, the higher conductivity value was obtained when smaller graphites were added. Meanwhile, the tensile and flexural strength are reduced upon increasing filler loading.

Elevated-temperature mechanical properties and thermal stability of Al-Cu-Mg-Ag heat-resistant alloy

The elevated-temperature mechanical properties and thermal stability of Al-Cu-Mg-Ag heat-resistant alloy were studied by tensile test, transmission electron microscopy(TEM) and scanning electron microscopy(SEM), respectively. The results show that with the increase of Ag content, the tensile strength and yield strength increase, which is attributed to the increase of the precipitations number and the decrease of the size. The same conclusions are drawn in the study of increasing Mg content. The alloy possesses excellent thermal stability. At 100-150 °C, the strength of the under-aged alloy increases at the initial stage, and after reaching the peak strength, it remains the same. The secondary precipitation of the under-aged alloy occurs in the process of exposure at 150℃, and it distributes diffusely after thermal exposed for 20 h. Then, the tensile strength decreases gradually with increasing the thermal exposure time at 200-250 °C. The strength of the peak-aged alloy decreases gradually, and the precipitation grows up, but the number decreases gradually with prolonging the exposure time at 100-250 °C. The strength of two kinds of alloys decreases with elevating of exposure temperature.

Heating and Cooling Performance of Earth-Tube Heat Exchanger in a Mechanical Ventilated Farrowing House

Earth tempering of stable air has attracted great attention as a sustainable air conditioning method in pig houses. At summer time air cooling of income air strongly reduces heat stress and required ventilation rate. At winter time heating costs can be reduced. The effect of air condition using geothermal energy was investigated in a farrowing house. Underneath the foundation of the farrowing house 88 non perforated ribbed tubes （diameter： 20 cm） were piped in a depth of 1.6-2.0 m. Over a period of 12 month following data were recorded at hourly intervals and analyzed： outside air temperature, as well as air temperature in the air supply duct and in the compartments. Incoming air （supply duct） was heated up to 20 ℃ during winter time and in summer time cooled by up to 15 ℃ compared to the outside air temperature. In contrast to the outside air diurnal variation, temperature fluctuations of the incoming air were reduced by 90%. Due to cooling of the incoming air at summer time the stable inside temperature could be limited to maximal 29 ℃（maximum outside temperature was 35℃）. Earth-tube heat exchangers with non perforated ribbed tubes were very efficient for air conditioning in farrowing houses. They were a cost effective supplement for sustainable cooling and heating of farrowing houses.

Effect of low temperature thermo-mechanical treatment on microstructures and mechanical properties of TC4 alloy

The effects of low temperature thermo-mechanical treatment （LTTMT） on microstructures and mechanical properties of Ti-6Al-4V （TC4） alloy were studied by optical microscopy （OM）, tensile test, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The experimental results confirm that the strength of TC4 alloy can be improved obviously by LTTMT processing, which combines strain strengthening with aging strengthening. The effect of LTTMT on the alloy depends on the microstructure of the refined and dispersed a＋fl phase on the basis of high dislocation density by pre-deformation below recrystallization temperature. The tensile strength decreases with the increase of pre-deformation reduction. The optimal processing parameters of LTTMT for TC4 alloy are as follows： solution treatment at 900 ℃ for 15 min, pre-deformation in the range of 600-700 ℃ with a reduction of 35%, finally aging at 540 ℃ for 4 h followed by air-cooling.

Evaluation of Nuclear Fuel Centerline Temperature Using New UO2 Thermal Conductivity Models

The nuclear industry needs of prediction of behavior and life-time, for a wide range of normal, off-normal and accident conditions for safe and economic operation. Among different thermo-mechanical properties that can be predictable, the knowledge on the radial temperature distribution of the UO2 （uranium dioxide） nuclear fuel during the operation of nuclear reactors is essential for safety as different mechanical and thermal-hydraulic thresholds should be respected. One of the attributes of the Brazilian CNEN （Nuclear Energy Commission） is to assess the performance of the fuel rods used in these reactors in high-bumup regimes. The effective removal of the heat generated in the fuel rods constitutes one of the primary points to consider in the design of nuclear reactors. One of the important physical parameters in the study of heat conduction from the nuclear fuel to the coolant in a PWR （pressurized water reactor） is its thermal conductivity. It is therefore desirable that the empirical models, updated for the calculation of thermal conductivity in the fuel region be developed from new sets of experimental data from the irradiated fuel rods in controlled environments This paper presents the obtained results of implementing of a new model for thermal conductivity of the UO2 in the FRAPCON code.