A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrai...A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrained specimen test（TSRST） of the asphalt mixtures. The results show that the low temperature performance of diatomite asphalt is better than that of neat asphalt. The glass transition temperature can reflect the low temperature performance of the diatomite asphalt better and has a good relationship with breaking temperatures. Besides, the TSRST, the bending test, the compressing test and the contraction coefficient test are used to study the low temperature performance of the diatomite asphalt mixture. The results prove that the low temperature performance of the diatomite asphalt mixture is better than that of the neat asphalt mixture. The critical bending strain energy density and the compressing strain energy density of the diatomite asphalt mixture are greater than those of the neat asphalt mixture. After adding diatomite to the asphalt mixture, the contraction coefficient is reduced. Based on the above results, the anti-cracking mechanism of the diatomite asphalt mixture is analyzed from the angle of contraction performance and breaking energy.展开更多
以泰花8号为试验材料,分别设置JM1(0.01 mm强化耐厚膜)、JM2(0.01 mm PPC膜)、JM3(0.01 mm PLA膜)、JM4(0.008 mm PLA膜)、JM5(0.006 mm PLA膜)、JM6(0.01 mm PBAT膜)和CK1(普通白膜)、CK2(普通黑膜)、CK3(露地栽培)处理,研究生物降解...以泰花8号为试验材料,分别设置JM1(0.01 mm强化耐厚膜)、JM2(0.01 mm PPC膜)、JM3(0.01 mm PLA膜)、JM4(0.008 mm PLA膜)、JM5(0.006 mm PLA膜)、JM6(0.01 mm PBAT膜)和CK1(普通白膜)、CK2(普通黑膜)、CK3(露地栽培)处理,研究生物降解膜对花生产量以及收获后田间土壤污染的影响。结果表明:花生收获前,JM2、JM4、JM5和JM6膜型自然降解均达4级(70%)以上,而JM1、CK1和CK2在土壤中仍保持完好。CK1、CK2、JM1对花生生育促进和增产效果均最好,JM3和JM2稍次。通过对JM2、JM3、JM6和CK3土壤样品进行全元素检测和热裂解分析,检测结果中重金属元素均处于安全范围内,且JM2、JM3、JM6土壤样品中主要成分均为CO2。展开更多
Two theoretical criteria represented by Katgerman, and Clyne and Davies for prognosticating hot tearing sensitivity were compared. Both unrefined and grain-refined samples of Al2024 alloy were solidified at various co...Two theoretical criteria represented by Katgerman, and Clyne and Davies for prognosticating hot tearing sensitivity were compared. Both unrefined and grain-refined samples of Al2024 alloy were solidified at various cooling rates ranging from 0.4 to 17.5 °C/s. Thermal analysis was used to detect dendrite coherency point and temperature of eutectic reaction. Curves of solid and liquid fractions were plotted based on Newtonian method to determine hot tearing susceptible areas. The experimental results show that the most susceptible zone in which hot tearing can occur in Al2024 is where Al_2CuMg intermetallic compound forms as a eutectic phase at last stage of mushy-state interval. Also, both criteria are in a good agreement with each other at high cooling rates used in direct-chill casting process while Clyne and Davies＇ model is more acceptable to determine hot tearing tendency from low to medium cooling rates.展开更多
In this paper, the research was focused on optimizing low-temperature heat recovery to adopt multi-effect distil- lation （MED） in desalination by pinch technology. And further analysis indicated that phase changes o...In this paper, the research was focused on optimizing low-temperature heat recovery to adopt multi-effect distil- lation （MED） in desalination by pinch technology. And further analysis indicated that phase changes occurred during the heat recovery process. In such case, the feed stream was divided into two streams： the liquid feed stream and the gaseous feed stream. Through calculation, the optimal ATmin was established at 26℃, and the total cost of heat exchange process was only $1.098× 106. By using the Problem Table Algorithm for pinch analysis, the temperature of the hot and the cold steams was 119℃ and 93 ℃, respectively. At a temperature higher than 119 ℃, all heat of the hot stream could not be cooled by the condenser, and the minimum heat load of utility （QH.min） was 440457.64 kW; and at a temperature below 93 ℃, all heat of the cold stream could not be provided by the heater, and the minimum cold load of utility （QC.min） was 1965993.85 kW. Finally, the synthesis of heat exchanger network was established through integrating two heat exchanger networks.展开更多
Although the FCC process has been used for more than halfa century, new and important developments continue to be made in several areas. Some of these new developments are a direct response to environmental regulation...Although the FCC process has been used for more than halfa century, new and important developments continue to be made in several areas. Some of these new developments are a direct response to environmental regulation. Sulfur oxides （SOx-SO2＋SO3） emitted from fluid catalytic cracking units （FCCU） are one of the most hazardous atmospheric pollutants, which may cause serious environmental problems such as the formation of acid rain and the destruction of the ozone layer. Thus, great attention has been focused on the SOx removal from FCC in last few years. The present papers will focus on the spinel material studies include three samples they were prepared by acidic method, solid solution MgAl2O4, solid solution with cerium10%Ce/MgAl2O4, iron mixed spinel with cerium 10%Ce/MgAl2-xFeO4.MgO and two samples solid solution with cerium introduce by vanadium as second co-catalyst prepared by basic method, 1% V/10%Ce/MgAl2O4.MgO were tested in TGA for oxidation half cycle to study some parameters effect on performance of SOx additives in TGA under condition similar to those of FCC units. Thermogravimetry analysis experiments have been used to demonstrate the pick-up and release of sulfur oxides in the development of additives for SOx control in the FCCU.展开更多
The dating of the uplift onset of the Huangshan pluton in the southern part of Anhui Province associated with the collision between paleo-Pacific Block and the Eurasian Block is a fundamental issue to better understan...The dating of the uplift onset of the Huangshan pluton in the southern part of Anhui Province associated with the collision between paleo-Pacific Block and the Eurasian Block is a fundamental issue to better understand the uplift mechanisms and the regional tectonic evolution. Х^2 values of seven zircon fission track （ZFF） samples collected from the south part of the Huangshan pluton were all 〈5%. Based on the grain ages of four typical ZFr samples, three thermal overprints ranging in 113-123, 72-95 and 49-66 Ma were distinguished respectively using the binomial peak-fitting method in accordance with the tectonic thermal events after south China shifted into circum-Pacific tectonic region. Apatite fission track （AFT） study of the Huangshan pluton shows ages lie between 15±3 and 56±6 Ma with all Х^2 values 〉5%, and all are significantly younger than their host rock formation ages, indicating that the samples have experienced post-formation thermal history. Based on the AFT resuits and topography characteristics in the Huangshan pluton, three zones with different denudation intensities caused by the differential uplift of the fault blocks were recognized in this paper, indicating that denudation was driven by the increase in elevation significantly. Modeling of the AFT data shows that the earlier cooling phase took place in the early Cenozoic and involved 3.3, 3.8 and 6.0℃/Ma of cooling rates equivalent to the exhumation rates of 90, 104 and 167 m/Ma in different fault blocks. The last phase of cooling took place from -10 Ma with average cooling rate of -5.6℃/Ma, equivalent to average denudation rates of -156 m/Ma. The fission track results imply that the regional compression field plays an important role for the differential exhumation between individual fault blocks of the Huangshan pluton.展开更多
基金The National Natural Science Foundation of China(No.50778057)
文摘A kind of neat asphalt and three kinds of diatomite asphalt are tested using differential scanning calorimetry（DSC）. The anti-cracking mechanism of diatomite asphalt is analyzed by DSC and the thermal stress restrained specimen test（TSRST） of the asphalt mixtures. The results show that the low temperature performance of diatomite asphalt is better than that of neat asphalt. The glass transition temperature can reflect the low temperature performance of the diatomite asphalt better and has a good relationship with breaking temperatures. Besides, the TSRST, the bending test, the compressing test and the contraction coefficient test are used to study the low temperature performance of the diatomite asphalt mixture. The results prove that the low temperature performance of the diatomite asphalt mixture is better than that of the neat asphalt mixture. The critical bending strain energy density and the compressing strain energy density of the diatomite asphalt mixture are greater than those of the neat asphalt mixture. After adding diatomite to the asphalt mixture, the contraction coefficient is reduced. Based on the above results, the anti-cracking mechanism of the diatomite asphalt mixture is analyzed from the angle of contraction performance and breaking energy.
文摘以泰花8号为试验材料,分别设置JM1(0.01 mm强化耐厚膜)、JM2(0.01 mm PPC膜)、JM3(0.01 mm PLA膜)、JM4(0.008 mm PLA膜)、JM5(0.006 mm PLA膜)、JM6(0.01 mm PBAT膜)和CK1(普通白膜)、CK2(普通黑膜)、CK3(露地栽培)处理,研究生物降解膜对花生产量以及收获后田间土壤污染的影响。结果表明:花生收获前,JM2、JM4、JM5和JM6膜型自然降解均达4级(70%)以上,而JM1、CK1和CK2在土壤中仍保持完好。CK1、CK2、JM1对花生生育促进和增产效果均最好,JM3和JM2稍次。通过对JM2、JM3、JM6和CK3土壤样品进行全元素检测和热裂解分析,检测结果中重金属元素均处于安全范围内,且JM2、JM3、JM6土壤样品中主要成分均为CO2。
文摘Two theoretical criteria represented by Katgerman, and Clyne and Davies for prognosticating hot tearing sensitivity were compared. Both unrefined and grain-refined samples of Al2024 alloy were solidified at various cooling rates ranging from 0.4 to 17.5 °C/s. Thermal analysis was used to detect dendrite coherency point and temperature of eutectic reaction. Curves of solid and liquid fractions were plotted based on Newtonian method to determine hot tearing susceptible areas. The experimental results show that the most susceptible zone in which hot tearing can occur in Al2024 is where Al_2CuMg intermetallic compound forms as a eutectic phase at last stage of mushy-state interval. Also, both criteria are in a good agreement with each other at high cooling rates used in direct-chill casting process while Clyne and Davies＇ model is more acceptable to determine hot tearing tendency from low to medium cooling rates.
基金the National Nature Science Foundation (Grant No. 51178463)
文摘In this paper, the research was focused on optimizing low-temperature heat recovery to adopt multi-effect distil- lation （MED） in desalination by pinch technology. And further analysis indicated that phase changes occurred during the heat recovery process. In such case, the feed stream was divided into two streams： the liquid feed stream and the gaseous feed stream. Through calculation, the optimal ATmin was established at 26℃, and the total cost of heat exchange process was only $1.098× 106. By using the Problem Table Algorithm for pinch analysis, the temperature of the hot and the cold steams was 119℃ and 93 ℃, respectively. At a temperature higher than 119 ℃, all heat of the hot stream could not be cooled by the condenser, and the minimum heat load of utility （QH.min） was 440457.64 kW; and at a temperature below 93 ℃, all heat of the cold stream could not be provided by the heater, and the minimum cold load of utility （QC.min） was 1965993.85 kW. Finally, the synthesis of heat exchanger network was established through integrating two heat exchanger networks.
文摘Although the FCC process has been used for more than halfa century, new and important developments continue to be made in several areas. Some of these new developments are a direct response to environmental regulation. Sulfur oxides （SOx-SO2＋SO3） emitted from fluid catalytic cracking units （FCCU） are one of the most hazardous atmospheric pollutants, which may cause serious environmental problems such as the formation of acid rain and the destruction of the ozone layer. Thus, great attention has been focused on the SOx removal from FCC in last few years. The present papers will focus on the spinel material studies include three samples they were prepared by acidic method, solid solution MgAl2O4, solid solution with cerium10%Ce/MgAl2O4, iron mixed spinel with cerium 10%Ce/MgAl2-xFeO4.MgO and two samples solid solution with cerium introduce by vanadium as second co-catalyst prepared by basic method, 1% V/10%Ce/MgAl2O4.MgO were tested in TGA for oxidation half cycle to study some parameters effect on performance of SOx additives in TGA under condition similar to those of FCC units. Thermogravimetry analysis experiments have been used to demonstrate the pick-up and release of sulfur oxides in the development of additives for SOx control in the FCCU.
基金supported by National Natural Science Foundation of China(Grant Nos.40772134)Open Research Program of the State Key Laboratory of Geological Processes and Mineral Resources,China University of Geosciences(Grant No.200643)
文摘The dating of the uplift onset of the Huangshan pluton in the southern part of Anhui Province associated with the collision between paleo-Pacific Block and the Eurasian Block is a fundamental issue to better understand the uplift mechanisms and the regional tectonic evolution. Х^2 values of seven zircon fission track （ZFF） samples collected from the south part of the Huangshan pluton were all 〈5%. Based on the grain ages of four typical ZFr samples, three thermal overprints ranging in 113-123, 72-95 and 49-66 Ma were distinguished respectively using the binomial peak-fitting method in accordance with the tectonic thermal events after south China shifted into circum-Pacific tectonic region. Apatite fission track （AFT） study of the Huangshan pluton shows ages lie between 15±3 and 56±6 Ma with all Х^2 values 〉5%, and all are significantly younger than their host rock formation ages, indicating that the samples have experienced post-formation thermal history. Based on the AFT resuits and topography characteristics in the Huangshan pluton, three zones with different denudation intensities caused by the differential uplift of the fault blocks were recognized in this paper, indicating that denudation was driven by the increase in elevation significantly. Modeling of the AFT data shows that the earlier cooling phase took place in the early Cenozoic and involved 3.3, 3.8 and 6.0℃/Ma of cooling rates equivalent to the exhumation rates of 90, 104 and 167 m/Ma in different fault blocks. The last phase of cooling took place from -10 Ma with average cooling rate of -5.6℃/Ma, equivalent to average denudation rates of -156 m/Ma. The fission track results imply that the regional compression field plays an important role for the differential exhumation between individual fault blocks of the Huangshan pluton.
