期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
含油污泥热解析油异味物质解析及控制技术概述
1
作者 徐得辉 许毓 +1 位作者 周倩 李响 《石油石化绿色低碳》 CAS 2024年第5期73-77,共5页
随着我国经济及工业现代化高速发展,资源化综合利用已成为生产和发展的重要条件之一,对油泥的无害化处理的需求变得尤为迫切。油泥热解产生热解油中的挥发性物质的扩散不仅造成资源浪费,也会在空气中散发出难闻气味,所以油泥热解过程的... 随着我国经济及工业现代化高速发展,资源化综合利用已成为生产和发展的重要条件之一,对油泥的无害化处理的需求变得尤为迫切。油泥热解产生热解油中的挥发性物质的扩散不仅造成资源浪费,也会在空气中散发出难闻气味,所以油泥热解过程的异味控制技术显得尤为重要。该文综述了当下异味的检测手段以及异味处理技术的现状,梳理了其他一些新型的异味物质控制技术,并展望了异味物质控制技术的发展方向,为异味物质控制实现油泥绿色资源化利用提供理论依据。 展开更多
关键词 污泥 热解析油 异味物质 检测技术 控制技术 添加剂
下载PDF
油基钻屑热解析油的异味去除实验研究
2
作者 李建林 王昌军 郑延成 《钻井液与完井液》 CAS 北大核心 2019年第6期727-730,共4页
油基钻井液产生的含油钻屑大多采用热解析的方法净化处理,但这种高温热解析回收的残余油存在难闻的异味,严重影响了热解析油在油基钻井液中的回收利用效果。通常情况下,物质产生异味的主要原因是其中含有易挥发的异味组分。采用蒸馏方... 油基钻井液产生的含油钻屑大多采用热解析的方法净化处理,但这种高温热解析回收的残余油存在难闻的异味,严重影响了热解析油在油基钻井液中的回收利用效果。通常情况下,物质产生异味的主要原因是其中含有易挥发的异味组分。采用蒸馏方法测定了现场柴油基钻屑热解析油中的低沸点馏分含量,研究了酸解方法、吸附-离心方法以及蒸馏方法对热解析油的异味去除效果,同时,采用气-质联用仪测定了热解析油处理后的组分,分析了热解析油产生异味的原因。结果表明:热解析油中低于150℃的馏分含量为2.5%,这些轻质组分是其产生异味的主要原因。该热解析油经酸解或吸附-离心后,仍然存在一定量的低沸点烯烃等成分,不能去除异味。蒸馏方法能有效去除热解析油中的低沸点馏分,将收集的高沸点馏分油回收用于油基钻井液,异味去除效果明显,现场可操作性强。 展开更多
关键词 基钻井液 热解析油 异味去除 组分测定 回收利用
下载PDF
Pyrolytic Degradation of Olive Waste Residue (OWR) by TGA: Thermal Decomposition Behavior and Kinetic Study
3
作者 Khalideh Al bkoor Alrawashdeh Katarzyna Slopiecka +2 位作者 Abdullah A. Alshorman Pietro Bartocci Francesco Fantozzi 《Journal of Energy and Power Engineering》 2017年第8期497-510,共14页
Olive oil is an important food industry product in Mediterranean countries. Large quantities of OWR (olive waste residue) are generated during a two- or three-phase separation process. This represents a major pollut... Olive oil is an important food industry product in Mediterranean countries. Large quantities of OWR (olive waste residue) are generated during a two- or three-phase separation process. This represents a major pollution problem for the industry and oil farms. The OWR is a source of substances of high value and can be used as a low-cost renewable energy. This work studied the behaviour of OWRs during the thermal decomposition process. The experiments of the slow pyrolysis process of three different waste olive products as olive pomace, olive tree pruning and olive kernels were performed under a nitrogen atmosphere at different heating rates, using a thermogravimetric balance. The samples were heated to a maximum temperature of 1,023 K, with four different heating rates of 2, 5, 10, 15 K/min. A comparison of different isoconversional (Flynn-Wall-Ozawa), not-isoconversional (Kissinger) model-free and model-fitting (Freeman-Carroll) methods to calculate the activation energy and pre-exponential factor is presented. In the Kissinger method the kinetic parameters were invariant for the whole pyrolysis process. While, in the case of Freeman-Carroll, it differs with change of the heating rate. The Flynn-Wall-Ozawa technique revealed the "not one-step" mechanism of reaction that occurs during the slow pyrolysis process. The kinetic data obtained in nitrogen atmosphere may provide more useful information for engineers for a better and complete description of the pyrolysis process and can be helpful to predict the kinetic model. 展开更多
关键词 THERMOGRAVIMETRY KINETICS BIOMASS isoconversional methods OWR model-fitting methods model-free methods.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部