Effect of different particle sizes of cordierite on properties of castable refractory by different heat treatment temperatures were investigated respectively with mullite and bauxite as raw materials, calcium aluminat...Effect of different particle sizes of cordierite on properties of castable refractory by different heat treatment temperatures were investigated respectively with mullite and bauxite as raw materials, calcium aluminate cement as binders. After 24 h curing in mould and another 24 h curing at 110 ℃ after demoulding, the specimens were heat treated at 1 000 ℃, 1 300℃ and 1 500℃ for 3 h, respectively. The bulk density （ BD）, permanent linear change （ PLC）, modulus of rupture（MOR） and clod crushing strength（CCS）, thermal expansion coefficient and thermal shock resistance were examined. The results show that there is no obvious effect on adjusting permanent linear change and bulk density of castables by adding different particle sizes of cordierite at low temperature and intermediate temperature. Modulus of rupture of castable increase with the decreasing of the particle sizes of cordierite after heat treated by 1 000 ℃ and 1 300℃. In this experiment, thermal shock resistance of the castable with cordierite whose particle size is 0 - 1 mm is the best.展开更多
In order to understand the initial surface damage of Al piston in unsteady thermal environment like knock combustion,T6 heat treated cast Al-Si-Cu alloy was thermal shocked under different heating speeds between room ...In order to understand the initial surface damage of Al piston in unsteady thermal environment like knock combustion,T6 heat treated cast Al-Si-Cu alloy was thermal shocked under different heating speeds between room temperature and 450°C by adjusting the environmental temperature.The surface evolution was mainly characterized in view of roughness,hardness,morphology,texture,phase and element distribution.Results indicated that both the roughness and hardness went up to the maximum and then decreased with rising heating speed.Micro-structure and phase analysis suggested that the interactions of solid phase transition and oxidation with enhancing thermal stress took responsible for the surface evolution.展开更多
Temporal and spatial anomalies associated with the Yushu earthquake, including the Outgoing Longwave Radiation( OLR), the Land Surface Temperature( LST) and surface temperature from the National Center for Environment...Temporal and spatial anomalies associated with the Yushu earthquake, including the Outgoing Longwave Radiation( OLR), the Land Surface Temperature( LST) and surface temperature from the National Center for Environmental Prediction( NCEP) are studied using thermal infrared remote sensing data in this paper. All results confirmed the previous observations of thermal anomalies in the seismic region prior to this earthquake.Among the multi-parameter anomalies, the underground water temperature anomaly appeared first and lasted for the longest time; OLR anomaly,an infrared parameter which indicates the radiation characteristics of the land surface medium,was the first to be detected; LST anomalies appeared later than OLR. NCEP temperature indicates the average atmosphere temperature with a certain vertical thickness; therefore,it was the last detected anomaly. The anomalies of OLR and LST lasted for a similar time length and were all located in the south or southwest of the epicenter.展开更多
文摘Effect of different particle sizes of cordierite on properties of castable refractory by different heat treatment temperatures were investigated respectively with mullite and bauxite as raw materials, calcium aluminate cement as binders. After 24 h curing in mould and another 24 h curing at 110 ℃ after demoulding, the specimens were heat treated at 1 000 ℃, 1 300℃ and 1 500℃ for 3 h, respectively. The bulk density （ BD）, permanent linear change （ PLC）, modulus of rupture（MOR） and clod crushing strength（CCS）, thermal expansion coefficient and thermal shock resistance were examined. The results show that there is no obvious effect on adjusting permanent linear change and bulk density of castables by adding different particle sizes of cordierite at low temperature and intermediate temperature. Modulus of rupture of castable increase with the decreasing of the particle sizes of cordierite after heat treated by 1 000 ℃ and 1 300℃. In this experiment, thermal shock resistance of the castable with cordierite whose particle size is 0 - 1 mm is the best.
基金Project(DLBF2018-KY-JS-066-J)supported by the China North Engine Research InstituteProject(51902239)supported by the National Natural Science Foundation of China+3 种基金Project(2020JQ-808)supported by the Science and Technology Fund of Shaanxi Province,ChinaProjects(19JK0400,19JK0402)supported by the Education Fund of Shaanxi Province,ChinaProject(S202010702070)supported by the Innovation and Entrepreneurship Training Program for College Students,ChinaProject supported by the Youth Innovation Team of Shaanxi Universities:Metal Corrosion Protection and Surface Engineering Technology,China。
文摘In order to understand the initial surface damage of Al piston in unsteady thermal environment like knock combustion,T6 heat treated cast Al-Si-Cu alloy was thermal shocked under different heating speeds between room temperature and 450°C by adjusting the environmental temperature.The surface evolution was mainly characterized in view of roughness,hardness,morphology,texture,phase and element distribution.Results indicated that both the roughness and hardness went up to the maximum and then decreased with rising heating speed.Micro-structure and phase analysis suggested that the interactions of solid phase transition and oxidation with enhancing thermal stress took responsible for the surface evolution.
基金supported by the project of 2017 Directional Task of Earthquake Tracking of CEA(Grant No.2017010406)the project of Youth Foundation of CENC(Grant No.QNJJ201603)
文摘Temporal and spatial anomalies associated with the Yushu earthquake, including the Outgoing Longwave Radiation( OLR), the Land Surface Temperature( LST) and surface temperature from the National Center for Environmental Prediction( NCEP) are studied using thermal infrared remote sensing data in this paper. All results confirmed the previous observations of thermal anomalies in the seismic region prior to this earthquake.Among the multi-parameter anomalies, the underground water temperature anomaly appeared first and lasted for the longest time; OLR anomaly,an infrared parameter which indicates the radiation characteristics of the land surface medium,was the first to be detected; LST anomalies appeared later than OLR. NCEP temperature indicates the average atmosphere temperature with a certain vertical thickness; therefore,it was the last detected anomaly. The anomalies of OLR and LST lasted for a similar time length and were all located in the south or southwest of the epicenter.
