The influences of heat treatment on stress corrosion cracking （SCC）, fracture toughness and strength of 7085 aluminum alloy were investigated by slow strain rate testing, Kahn tear testing combined with scanning ele...The influences of heat treatment on stress corrosion cracking （SCC）, fracture toughness and strength of 7085 aluminum alloy were investigated by slow strain rate testing, Kahn tear testing combined with scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that the fracture toughness of T74 overaging is increased by 22.9% at the expense of 13.6% strength, and retrogression and reaging （RRA） enhances fracture toughness 14.2% without reducing the strength compared with T6 temper. The fracture toughness of dual-retrogression and reaging （DRRA） is equivalent to that of T74 with an increased strength of 14.6%. The SCC resistance increases in the order： T6〈RRA〈DRRA≈T74. The differences of fracture toughness and SCC were explained on the basis of the role of matrix precipitates and grain boundary orecioitates.展开更多
A modified MK model combined with ductile fracture criterion（DFC-MK model） is proposed to compute the forming limit diagrams（FLDs） of 5A06-O aluminum alloy sheet at different temperatures.The material constant（C...A modified MK model combined with ductile fracture criterion（DFC-MK model） is proposed to compute the forming limit diagrams（FLDs） of 5A06-O aluminum alloy sheet at different temperatures.The material constant（C） of ductile fracture criterion and initial thickness imperfection parameter（f0） at various temperatures are determined by using a new computing method based on wide sheet bending test.The FLDs at 20 and 200 °C are calculated through the DFC-MK model.The DFC-MK model,which includes the influence of through-thickness normal stress,is written into the subroutine VUMAT embedded in Abaqus/ Explicit.The cylindrical cup hydroforming tests are carried out to verify the model.The results show that compared with experimental observations,the predicted FLDs based on DFC-MK model are more accurate than the conventional MK model;the errors between the simulations and experiments in warm hydroforming are 8.23% at 20 °C and 9.24% at 200 °C,which verify the effectiveness of the proposed model.展开更多
Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile ...Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile fibers and multi-variance fibers used in textile industry, the properties of above two kinds of differential polyester filaments after drawing in different heat conditions were studied. Finally following conclusions were obtained: Firstly, the tenacity and elongation at break decreases with the rise of Tp. Secondly, the tenacity rises but the elongation at break decreases with the increase of Tb. Then, when the Tb is low, both the shrinkage in boiling water and hi hot air decreases with the rise of Tp, while, when the Tb is high, both the shrinkage rises with the rise of Tp. The last, both the shrinkage decreases with the rise of Tb.展开更多
基金Projects(2010CB731701,2012CB619502)supported by the National Basic Research Program of ChinaProjects(51201186,51327902)supported by the National Natural Science Foundation of China
文摘The influences of heat treatment on stress corrosion cracking （SCC）, fracture toughness and strength of 7085 aluminum alloy were investigated by slow strain rate testing, Kahn tear testing combined with scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that the fracture toughness of T74 overaging is increased by 22.9% at the expense of 13.6% strength, and retrogression and reaging （RRA） enhances fracture toughness 14.2% without reducing the strength compared with T6 temper. The fracture toughness of dual-retrogression and reaging （DRRA） is equivalent to that of T74 with an increased strength of 14.6%. The SCC resistance increases in the order： T6〈RRA〈DRRA≈T74. The differences of fracture toughness and SCC were explained on the basis of the role of matrix precipitates and grain boundary orecioitates.
基金Project(51175024)supported by the National Natural Science Foundation of China
文摘A modified MK model combined with ductile fracture criterion（DFC-MK model） is proposed to compute the forming limit diagrams（FLDs） of 5A06-O aluminum alloy sheet at different temperatures.The material constant（C） of ductile fracture criterion and initial thickness imperfection parameter（f0） at various temperatures are determined by using a new computing method based on wide sheet bending test.The FLDs at 20 and 200 °C are calculated through the DFC-MK model.The DFC-MK model,which includes the influence of through-thickness normal stress,is written into the subroutine VUMAT embedded in Abaqus/ Explicit.The cylindrical cup hydroforming tests are carried out to verify the model.The results show that compared with experimental observations,the predicted FLDs based on DFC-MK model are more accurate than the conventional MK model;the errors between the simulations and experiments in warm hydroforming are 8.23% at 20 °C and 9.24% at 200 °C,which verify the effectiveness of the proposed model.
文摘Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile fibers and multi-variance fibers used in textile industry, the properties of above two kinds of differential polyester filaments after drawing in different heat conditions were studied. Finally following conclusions were obtained: Firstly, the tenacity and elongation at break decreases with the rise of Tp. Secondly, the tenacity rises but the elongation at break decreases with the increase of Tb. Then, when the Tb is low, both the shrinkage in boiling water and hi hot air decreases with the rise of Tp, while, when the Tb is high, both the shrinkage rises with the rise of Tp. The last, both the shrinkage decreases with the rise of Tb.
