Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,s...Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,scanning electron microscopy,nitrogen adsorption-desorption,pyridine-adsorbed infrared spectroscopy,temperature-programmed desorption of NH3,temperature-programmed reduction of hydrogen,temperature-programmed desorption of hydrogen,transmission electron microscopy,and X-ray photoelectron spectroscopy.The addition of zinc resulted in high dispersion of platinum.Zinc acted as a competitive adsorbent,changed the location of platinum.The catalyst with a zinc loading of 0.5%gave the highest selectivity to dimethylhexanes,but the conversion was lower than those achieved with the other catalysts.Dimethylhexanes have large molecular diameters,and therefore their diffusion may be difficult.This weakens the catalytic activity of the zinc-modified catalysts and lowers the n-octane conversion.展开更多
A new kinetic model for commercial unit of toluene disproportionation and C9-armatiocs transalkylation is developed based on the reported reaction scheme.A time based catalyst deactivation function taking weight hourl...A new kinetic model for commercial unit of toluene disproportionation and C9-armatiocs transalkylation is developed based on the reported reaction scheme.A time based catalyst deactivation function taking weight hourly space velocity(WHSV)into account is incorporated into the model,which reasonably accounts for the loss in activity because of coke deposition on the surface of catalyst during long-term operation.The kinetic parameters are benchmarked with several sets of balanced plant data and estimated by the differential variable metric optimiza- tion method.Sets of plant data at different operating conditions are applied to make sure validation of the model and the results show a good agreement between the model predictions and plant observations.The simulation analysis of key variables such as temperature and WHSV affecting process performance is discussed in detail,giv- ing the guidance to select suitable operating conditions.展开更多
Oxidative dehydrogenation of light alkanes to alkenes is an attractive alternative route for industrial direct dehydrogenation because of favorable thermodynamic and kinetic characteristics,but encounters difficulties...Oxidative dehydrogenation of light alkanes to alkenes is an attractive alternative route for industrial direct dehydrogenation because of favorable thermodynamic and kinetic characteristics,but encounters difficulties in selectivity control for alkenes because of over-oxidation reactions that produce a substantial amount of undesired carbon oxides.Recent progress has revealed that boron nitride is a highly promising catalyst in the oxidative dehydrogenation of light alkanes because of its superior selectivity for and high productivity of light alkenes,negligible formation of CO2,and remarkable catalyst stability.From this viewpoint,recent works on boron nitride in the oxidative dehydrogenations of ethane,propane,butane,and ethylbenzene are reviewed,and the emphasis of this viewpoint is placed on discussing the catalytic origin of boron nitride in oxidative dehydrogenation reactions.After analyzing recent progress in the use of boron nitride for oxidative dehydrogenation reactions and finding much new evidence,we conclude that pure boron nitride is catalytically inert,and an activation period is required under the reaction conditions;this process is accompanied by an oxygen functionalization at the edge of boron nitride;the B-O species themselves have no catalytic activity in C-H cleavage,and the B-OH groups,with the assistance of molecular oxygen,play the key role in triggering the oxidative dehydrogenation of propane;the dissociative adsorption of molecular oxygen is involved in the reaction process;and a straightforward strategy for preparing an active boron nitride catalyst with hydroxyl groups at the edges can efficiently enhance the catalytic efficacy.A new redox reaction cycle based on the B-OH sites is also proposed.Furthermore,as this is a novel catalytic system,there is an urgent need to develop new methods to optimize the catalytic performances,clarify the catalytic function of boron species in the alkane ODH reactions,and disclose the reaction mechanism under realistic reaction conditions.展开更多
Removal of trace olefins from aromatic liquids had been investigated in the presence of various ionic liquids like 1-ethyl-3-methylimidazoliurn bromochloroaluminate (EMIMBr-AlCl3), 1-butyl-3-methylimidazolium bromoc...Removal of trace olefins from aromatic liquids had been investigated in the presence of various ionic liquids like 1-ethyl-3-methylimidazoliurn bromochloroaluminate (EMIMBr-AlCl3), 1-butyl-3-methylimidazolium bromochloroaluminate (BMIMBr-AlCl3), l-hexyl-3-methylimidazolium bromochloroaluminate (HMIMBr-AlCl3), and 1-octyl-3-methylimidazolium bromochloroaluminate (OMIMBr-A1C13). It was found that the longer the alkyl chain of ionic liquid cations was, the higher the olefins conversion would be. OMIMBr-AlCl3 (with 0.67 molar fraction of AlCl3) had an obvious performance on olefins removal. The influences of various reaction parameters such as the dosage of catalyst, the reaction temperature, and the reaction time on the reaction catalyzed by OMIMBr-AlCl3 were investigated. Under optimum reaction conditions, a higher than 99% conversion of olefins was achieved. The preliminary results revealed that the process could save time, consume less energy, separate products easier, and cause less pollution to the environment.展开更多
In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation b...In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation behaviors of ethylene, ethane, propylene, propane, n-butane, methane and nitrogen through the multilayer composite membranes were investigated over a range of operating temperature and pressure. The permeances of light hydrocarbons through PEI/PDMS/PEBA1657/PDMS composite membranes increase with their increasing condensability, and the olefins are more permeable than their corresponding paraffins. For light hydrocarbons, the gas permeances increase significantly as temperature increasing. When the transmembrane pressure difference increases, the gas permeance increases moderately due to plasticization effect, while their apparent activation energies for permeation decrease.展开更多
Flash point is a primary property used to determine the fire and explosion hazards of a liquid. New group contribution-based models were presented for estimation of the flash point of alkanes by the use of multiple li...Flash point is a primary property used to determine the fire and explosion hazards of a liquid. New group contribution-based models were presented for estimation of the flash point of alkanes by the use of multiple linear regression(MLR)and artificial neural network(ANN). This simple linear model shows a low average relative deviation(AARD) of 2.8% for a data set including 50(40 for training set and 10 for validation set) flash points. Furthermore, the predictive ability of the model was evaluated using LOO cross validation. The results demonstrate ANN model is clearly superior both in fitness and in prediction performance.ANN model has only the average absolute deviation of 2.9 K and the average relative deviation of 0.72%.展开更多
To enhance the process of phenyltrichlorosilane synthesis using gas phase condensation, a series of chloralkanes were introduced. The influence of temperature and chloralkane amount on the synthesis was studied based ...To enhance the process of phenyltrichlorosilane synthesis using gas phase condensation, a series of chloralkanes were introduced. The influence of temperature and chloralkane amount on the synthesis was studied based on the product distribution from a tubular reactor. The promoting effect of chloralkane addition was mainly caused by the chloralkane radicals generated by the dissociation of C–Cl bond. The promoting effect of the chloromethane with more chlorine atoms was better than those with less chlorine atoms. Intermediates detected from the reactions with isoprene and bromobenzene demonstrated that both trichlorosilyl radical and dichlorosilylene existed in the reaction system in the presence of chloralkanes. A detailed reaction scheme was proposed.展开更多
Free radical fluoroalkylation of terminal alkenes and alkynes with iododifluoromethanesulfonamides has been successfully achieved.It was found that both the catalytic amount of sodium dithionite (Na2S2O4) and the stoi...Free radical fluoroalkylation of terminal alkenes and alkynes with iododifluoromethanesulfonamides has been successfully achieved.It was found that both the catalytic amount of sodium dithionite (Na2S2O4) and the stoichiometric amount of triethylborane (Et3B)/air can efficiently initiate the current free-radical atom transfer reaction.展开更多
Bacterial biofilms are inherently resistant to antimicrobial agents and are difficult to eradicate with conventional antimicrobial agents, resulting in many persistent and chronic bacterial infections. In this contrib...Bacterial biofilms are inherently resistant to antimicrobial agents and are difficult to eradicate with conventional antimicrobial agents, resulting in many persistent and chronic bacterial infections. In this contribution, a new strategy for reversing the biofilm-associated antibiotic resistance has been explored by induction of a carborane ruthenium(II)-arene complex (FcRuSB). Our results demonstrate that the FcRuSB could be utilized as an inducer to efficiently reverse the biofilm-associated antibiotic resistance of multidrug-resistant (MDR) clinical isolates of Staphylococcus aureus and Pseudomonas aeruginosa. The induced effect of FcRuSB is correlated with a considerable decrease in the expression of extracellular matrix proteins (EMP) of the two strains. The considerable decrease of the EMP of induced cells, resulting in the reduction of adherence and biofilm formation ability of the two types of MDR pathogens, and then can cause significantly enhanced sensitivity of them to antibiotics.展开更多
基金supported by the National Natural Science Foundation of China(21676300)~~
文摘Zinc-modified Pt/SAPO-11 catalysts were prepared by incipient wetness impregnation and assessed in the hydroisomerization of n-octane.Their physicochemical properties were investigated using powder X-ray diffraction,scanning electron microscopy,nitrogen adsorption-desorption,pyridine-adsorbed infrared spectroscopy,temperature-programmed desorption of NH3,temperature-programmed reduction of hydrogen,temperature-programmed desorption of hydrogen,transmission electron microscopy,and X-ray photoelectron spectroscopy.The addition of zinc resulted in high dispersion of platinum.Zinc acted as a competitive adsorbent,changed the location of platinum.The catalyst with a zinc loading of 0.5%gave the highest selectivity to dimethylhexanes,but the conversion was lower than those achieved with the other catalysts.Dimethylhexanes have large molecular diameters,and therefore their diffusion may be difficult.This weakens the catalytic activity of the zinc-modified catalysts and lowers the n-octane conversion.
基金Supported by the National'Creative Research Groups Science Foundation of China (No.60421002) and priority supported financially by "the New Century 151 Talent Project" of Zhejiang Province.
文摘A new kinetic model for commercial unit of toluene disproportionation and C9-armatiocs transalkylation is developed based on the reported reaction scheme.A time based catalyst deactivation function taking weight hourly space velocity(WHSV)into account is incorporated into the model,which reasonably accounts for the loss in activity because of coke deposition on the surface of catalyst during long-term operation.The kinetic parameters are benchmarked with several sets of balanced plant data and estimated by the differential variable metric optimiza- tion method.Sets of plant data at different operating conditions are applied to make sure validation of the model and the results show a good agreement between the model predictions and plant observations.The simulation analysis of key variables such as temperature and WHSV affecting process performance is discussed in detail,giv- ing the guidance to select suitable operating conditions.
基金supported by State Key Program of the National Natural Science Foundation of China(21733002)the National Natural Science Foundation of China(U1462120,21403027)Cheung Kong Scholars Programme of China(T2015036)~~
文摘Oxidative dehydrogenation of light alkanes to alkenes is an attractive alternative route for industrial direct dehydrogenation because of favorable thermodynamic and kinetic characteristics,but encounters difficulties in selectivity control for alkenes because of over-oxidation reactions that produce a substantial amount of undesired carbon oxides.Recent progress has revealed that boron nitride is a highly promising catalyst in the oxidative dehydrogenation of light alkanes because of its superior selectivity for and high productivity of light alkenes,negligible formation of CO2,and remarkable catalyst stability.From this viewpoint,recent works on boron nitride in the oxidative dehydrogenations of ethane,propane,butane,and ethylbenzene are reviewed,and the emphasis of this viewpoint is placed on discussing the catalytic origin of boron nitride in oxidative dehydrogenation reactions.After analyzing recent progress in the use of boron nitride for oxidative dehydrogenation reactions and finding much new evidence,we conclude that pure boron nitride is catalytically inert,and an activation period is required under the reaction conditions;this process is accompanied by an oxygen functionalization at the edge of boron nitride;the B-O species themselves have no catalytic activity in C-H cleavage,and the B-OH groups,with the assistance of molecular oxygen,play the key role in triggering the oxidative dehydrogenation of propane;the dissociative adsorption of molecular oxygen is involved in the reaction process;and a straightforward strategy for preparing an active boron nitride catalyst with hydroxyl groups at the edges can efficiently enhance the catalytic efficacy.A new redox reaction cycle based on the B-OH sites is also proposed.Furthermore,as this is a novel catalytic system,there is an urgent need to develop new methods to optimize the catalytic performances,clarify the catalytic function of boron species in the alkane ODH reactions,and disclose the reaction mechanism under realistic reaction conditions.
文摘Removal of trace olefins from aromatic liquids had been investigated in the presence of various ionic liquids like 1-ethyl-3-methylimidazoliurn bromochloroaluminate (EMIMBr-AlCl3), 1-butyl-3-methylimidazolium bromochloroaluminate (BMIMBr-AlCl3), l-hexyl-3-methylimidazolium bromochloroaluminate (HMIMBr-AlCl3), and 1-octyl-3-methylimidazolium bromochloroaluminate (OMIMBr-A1C13). It was found that the longer the alkyl chain of ionic liquid cations was, the higher the olefins conversion would be. OMIMBr-AlCl3 (with 0.67 molar fraction of AlCl3) had an obvious performance on olefins removal. The influences of various reaction parameters such as the dosage of catalyst, the reaction temperature, and the reaction time on the reaction catalyzed by OMIMBr-AlCl3 were investigated. Under optimum reaction conditions, a higher than 99% conversion of olefins was achieved. The preliminary results revealed that the process could save time, consume less energy, separate products easier, and cause less pollution to the environment.
基金Supported by Key Projects in the National Science & Technology Pillar Program (2011BAC08B00)
文摘In this paper, poly(amide-6-β-ethylene oxide) (PEBA1657) copolymer was used to prepare multilayer polyetherimide (PEI)/polydimethylsiloxane (PDMS)/PEBA1657/PDMS composite membranes by dip-coating method. Permeation behaviors of ethylene, ethane, propylene, propane, n-butane, methane and nitrogen through the multilayer composite membranes were investigated over a range of operating temperature and pressure. The permeances of light hydrocarbons through PEI/PDMS/PEBA1657/PDMS composite membranes increase with their increasing condensability, and the olefins are more permeable than their corresponding paraffins. For light hydrocarbons, the gas permeances increase significantly as temperature increasing. When the transmembrane pressure difference increases, the gas permeance increases moderately due to plasticization effect, while their apparent activation energies for permeation decrease.
基金Projects(21376031,21075011)supported by the National Natural Science Foundation of ChinaProject(2012GK3058)supported by the Foundation of Hunan Provincial Science and Technology Department,China+2 种基金Project supported by the Postdoctoral Science Foundation of Central South University,ChinaProject(2014CL01)supported by the Foundation of Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation,ChinaProject supported by the Innovation Experiment Program for University Students of Changsha University of Science and Technology,China
文摘Flash point is a primary property used to determine the fire and explosion hazards of a liquid. New group contribution-based models were presented for estimation of the flash point of alkanes by the use of multiple linear regression(MLR)and artificial neural network(ANN). This simple linear model shows a low average relative deviation(AARD) of 2.8% for a data set including 50(40 for training set and 10 for validation set) flash points. Furthermore, the predictive ability of the model was evaluated using LOO cross validation. The results demonstrate ANN model is clearly superior both in fitness and in prediction performance.ANN model has only the average absolute deviation of 2.9 K and the average relative deviation of 0.72%.
文摘To enhance the process of phenyltrichlorosilane synthesis using gas phase condensation, a series of chloralkanes were introduced. The influence of temperature and chloralkane amount on the synthesis was studied based on the product distribution from a tubular reactor. The promoting effect of chloralkane addition was mainly caused by the chloralkane radicals generated by the dissociation of C–Cl bond. The promoting effect of the chloromethane with more chlorine atoms was better than those with less chlorine atoms. Intermediates detected from the reactions with isoprene and bromobenzene demonstrated that both trichlorosilyl radical and dichlorosilylene existed in the reaction system in the presence of chloralkanes. A detailed reaction scheme was proposed.
基金financially supported by the National Natural Science Foundation of China (20825209, 20832008, 20772144)the Chinese Academy of Sciences (Hundreds-Talent Program and Knowledge Innovation Program)
文摘Free radical fluoroalkylation of terminal alkenes and alkynes with iododifluoromethanesulfonamides has been successfully achieved.It was found that both the catalytic amount of sodium dithionite (Na2S2O4) and the stoichiometric amount of triethylborane (Et3B)/air can efficiently initiate the current free-radical atom transfer reaction.
基金the financial support from National Nature Science Foundation of China (21175020)National Key Basic Research Program (2010CB732404)Graduate Research and Innovation Program of Jiangsu Province (CXLX_0145)
文摘Bacterial biofilms are inherently resistant to antimicrobial agents and are difficult to eradicate with conventional antimicrobial agents, resulting in many persistent and chronic bacterial infections. In this contribution, a new strategy for reversing the biofilm-associated antibiotic resistance has been explored by induction of a carborane ruthenium(II)-arene complex (FcRuSB). Our results demonstrate that the FcRuSB could be utilized as an inducer to efficiently reverse the biofilm-associated antibiotic resistance of multidrug-resistant (MDR) clinical isolates of Staphylococcus aureus and Pseudomonas aeruginosa. The induced effect of FcRuSB is correlated with a considerable decrease in the expression of extracellular matrix proteins (EMP) of the two strains. The considerable decrease of the EMP of induced cells, resulting in the reduction of adherence and biofilm formation ability of the two types of MDR pathogens, and then can cause significantly enhanced sensitivity of them to antibiotics.