Polydimethylsiloxane （PDMS）, tetraethoxysilane （TEOS）, ethyl alcohol （EtOH） and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the cont...Polydimethylsiloxane （PDMS）, tetraethoxysilane （TEOS）, ethyl alcohol （EtOH） and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the contents of H2O and PDMS on thin films was studied. When the volume ratio of H20 to TEOS is 0.5, the optimum quality of thin films is obtained. And the gelation time is affected slightly by H20 content. Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2. Yet, the sol would be inactive in 6 d. Various properties of thin films were studied, including hardness, adhesive quality, hydrophobic property, corrosion protection property, and abrasion resistance. Test results show that the pencil hardness is generally 3-6 H, and adhesive quality achieves the highest standard of 0. When the sintering temperature is below 400℃, the contact angle is about 95° and hydrophobic films are obtained. The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300℃. And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400℃.展开更多
This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropy...This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.展开更多
A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative ...A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.展开更多
基金supported partly by the School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong university,China
文摘Polydimethylsiloxane （PDMS）, tetraethoxysilane （TEOS）, ethyl alcohol （EtOH） and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the contents of H2O and PDMS on thin films was studied. When the volume ratio of H20 to TEOS is 0.5, the optimum quality of thin films is obtained. And the gelation time is affected slightly by H20 content. Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2. Yet, the sol would be inactive in 6 d. Various properties of thin films were studied, including hardness, adhesive quality, hydrophobic property, corrosion protection property, and abrasion resistance. Test results show that the pencil hardness is generally 3-6 H, and adhesive quality achieves the highest standard of 0. When the sintering temperature is below 400℃, the contact angle is about 95° and hydrophobic films are obtained. The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300℃. And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400℃.
文摘This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.
基金Supported by the National Natural Science Foundation of China(21306088)National Key Technologies R&D Program of China(2015BAD15B07)+1 种基金State Key Laboratory of Chemical Engineering(SKL-Ch E-13A01,Tsinghua University,China)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD,China)
文摘A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.
