推进剂贮箱金属焊接件疲劳裂纹对应力强度因子影响的数值分析

卫星推进剂贮箱的焊接质量直接影响卫星的寿命和可靠性。文章通过仿真分析研究焊接残余应力对贮箱上已存在裂纹的影响。首先针对球壳模型和平板模型分别计算焊接残余应力,然后在应力强度值最大的危险区域引入裂纹,对不同角度和尺寸系数的裂纹对应力强度因子影响的数值和变化趋势进行分析。研究表明:起主要作用的是应力强度因子KⅠ;KⅡ受角度影响相对较大;KⅠ和KⅡ的最小值都在裂纹中心处;KⅢ基本随归一化裂纹前沿数值增加而增加。

Fatigue behavior and life prediction of A7N01 aluminium alloy welded joint

Fatigue characteristics of A7N01 aluminium alloy welded joint were investigated and a fatigue crack initiation life-based model was proposed. The difference of fatigue crack initiation life among base metal, weld metal and heat affected zone (HAZ) is slight. Furthermore, the ratio of fatigue crack initiation life (Ni) to fatigue life to failure(Nf) is a material dependent parameter, 26.32%, 40.21% and 60.67% for base metal, HAZ and weld metal, respectively. Total fatigue life predicted using the presented model is in good agreement with the experimental data and that using Basquin’s model. The observation results of fatigue fracture surfaces, using scanning electron microscope (SEM), demonstrate that fatigue crack initiates from smooth surface due to welding process for weld metal, blowhole in HAZ causes fatigue crack initiation, and the crushed second phase particles play an important part in fatigue crack initiation in base metal.

特大型滚子轴承支柱保持架优化设计

在分析了特大型滚子轴承支柱保持架失效模式的基础上,对支柱与垫片连接的螺纹连接端和焊接连接端分别进行了优化设计,大大降低了支柱保持架的失效概率。