Three kinds of anatomically_preserved lepidodendralean leaves from Permian coal balls of China were studied. They all have double xylem strands, which is consistent with the genus Sigillariopsis Scott. Compared wi...Three kinds of anatomically_preserved lepidodendralean leaves from Permian coal balls of China were studied. They all have double xylem strands, which is consistent with the genus Sigillariopsis Scott. Compared with the species of Sigillariopsis , they are considered as three new species: S. shanxiensis sp. nov. and S. taiyuanensis sp. nov. from Coal Seam 7 in the upper part of the Taiyuan Formation (lower Lower Permian), Xishan Coal Field, Taiyuan, Shanxi Province and S. guizhouensis sp. nov. from Coal Seam 1 in the Wangjiazhai Formation (upper Upper Permian), Shuicheng Coal Mining District, Guizhou Province. Based on the associated organs of lepidodendraleans other than leaves and the information of the Euramerican lepidodendraleans, the affinities of the three new species of Sigillariopsis are discussed and they are probably leaves of Sigillaria Brongniart. In Euramerican Flora, Sigillaria (including its leaves Sigillariopsis ) mainly lived in the Carboniferous period and in the Cathaysian Flora they lived in the Upper Carboniferous to upper Upper Permian periods in rare localities. The leaves and fertile organs of Sigillaria have not been reported from the Cathaysian Flora to date. Three new species of the Permian anatomically_preserved leaves of Sigillaria not only increase the diversity of the Cathaysian sigillarian but also bear important significance on the evolution of sigillarian plants and the relationship of the Cathaysian and Euramerican lepidodendraleans.展开更多
The isolated and anatomically_preserved lepidodendralean leaf cushions were described from coal balls in Wangjiazhai Formation (upper Upper Permian) in western Guizhou Province. These leaf cushions are very similar t...The isolated and anatomically_preserved lepidodendralean leaf cushions were described from coal balls in Wangjiazhai Formation (upper Upper Permian) in western Guizhou Province. These leaf cushions are very similar to Lepidodendron lepidophloides Yao both in size and morphology. They probably belong to the same species in different preservative condition. Comparisons on morphology and anatomy of L. lepidophloides and lepidodendralean leaf cushion genera, such as Lepidodendron, Lepidophloios, Sigillaria and Cathaysiodendron revealed that L. lepidophloides possesses mixed features of all these genera and it can not be assigned into any of them without doubt. It probably represents a new genus. Because the anatomical features of the other parts of the stem as well as the fertile organs related to these leaf cushions are unknown, the specific name L. lepidophloides is adopted. We leave this taxonomic problem open till the relationship between these leaf cushions and the stem and fertile organs become clear. This is the first report on the detailed anatomical features of the Cathaysian lepidodendralean leaf cushions.展开更多
Estimation of S-wave velocity using logging data has mainly been performed for sandstone, mudstone and oil and gas strata, while its application to hydrate reservoirs has been largely overlooked. In this paper we pres...Estimation of S-wave velocity using logging data has mainly been performed for sandstone, mudstone and oil and gas strata, while its application to hydrate reservoirs has been largely overlooked. In this paper we present petxophysical methods to estimate the S-wave velocity of hydrate reservoirs with the P-wave velocity and the density as constraints. The three models used in this paper are an equivalent model （MBGL）, a three-phase model （TPBE）, and a thermo-elasticity model （TEM）. The MBGL model can effectively describe the internal relationship among the components of the rock, and the estimated P-wave velocities are in good agreement with the measured data （2.8% error）. However, in the TPBE model, the solid, liquid and gas phases axe considered to be independent of each other, and the estimation results are relatively low （46.6% error）. The TEM model is based on the sensitivity of the gas hydrate to temperature and pressure, and the accuracy of the estimation results is also high （3.6% error）. Before the estimation, the occurrence patterns of hydrates in the Shenhu area were examined, and occurrence state one （the hydrate is in solid form in the reservoir） was selected for analysis. By using the known P-wave velocity and density as constraints, a reasonable S-wave velocity value （ranging from 400 to 1100 m s 1 and for a hydrate layer of 1100 m s 1） can be obtained through multiple iterations. These methods and results provide new data and technical support for further research on hydrates and other geological features in the Shenhu area.展开更多
To optimize the technological parameter of underground coal gasification （UCG）, the experimental results of air gasification, air-steam gasification, oxygen-enrichment steam gasification, pure oxygen steam gasificat...To optimize the technological parameter of underground coal gasification （UCG）, the experimental results of air gasification, air-steam gasification, oxygen-enrichment steam gasification, pure oxygen steam gasification and two-stage gasification were studied contrastively based on field trial at the Huating UCG project. The results indicate that the average low heat value of gas from air experiment is the lowest （4.1 MJ/Nm3） and the water gas from two-stage gasification experiment is the highest （10.72 MJ/Nm3）. The gas productivity of air gasification is the highest and the pure oxygen steam gasification is the lowest. The gasification efficiency of air gasification, air-steam gasification, oxygen-enriched steam gasification, pure oxygen steam gasification and two-stage gasification is listed in ascending order, ranging from 69.88% to 84.81%. Described a contract study on results of a field test using steam and various levels of oxygen enrichment of 21%, 32%, 42% and 100%. The results show that, with the increasing of O2 content in gasifying agents, the gas caloricity rises, and the optimal O2 concentration range to increase the gas caloricity is 30%-40%. Meanwhile, the consumption of O2 and steam increase, and the air consumption and steam decomposition efficiency fall.展开更多
Under two rock strata combination conditions, over 10,000 microseismic events were received with microseismic location monitoring technology which possessed by the author＇s studying team, used in fully mechanized coa...Under two rock strata combination conditions, over 10,000 microseismic events were received with microseismic location monitoring technology which possessed by the author＇s studying team, used in fully mechanized coal face of Huafeng Mine of Xinwen Coal Mining Group Co., Shandong Province. On the basis of the achievement of the location results, the conclusions were drawn as follows： On the basis of the achievement of 3D strata fracturing situation and the section plane of microseimic events in different areas, the relationship between spatial structure of overlying strata and mining pressure field was found, and we might describe distribution range of dynamic pressure of advance pressure and lateral stress around long face, and range of structure ad-tivation. Quantitative guidance to prevent dynamic disasters was provided. The practice in coal mine got a effective results. According to the FLAG3D soft numerical simulation of diameter drilling hole （the diameter is 300 mm） to relieve pressure in specified geological condition in Huafeng Mine, the right distance of two dirlls is 2.5 m and the right depth is 12 m. The research pro-vided basic guiding and practical experiences for the underground microseismic monitoring and disaster prevention in side slopes or tunnels engineering.展开更多
Two coal samples of similar rank were chosen from Australia and China to investigate the differences in Coal-Water Slurry （CWS） made from them. The effect of ash content and particle size gradation on these properti...Two coal samples of similar rank were chosen from Australia and China to investigate the differences in Coal-Water Slurry （CWS） made from them. The effect of ash content and particle size gradation on these properties was also studied. Different grinding times were used when grinding the two coals and particle size analysis of these ground coals was used to select samples with a ＂double-peak＂ particle size distri- bution. All the ＂double-peak＂ samples were used to prepare a CWS. The concentration, viscosity, fluidity, and stability of each CWS were measured. The results show that the properties ofa CWS prepared from a coal sample with a ＂double-peak＂ size distribution are better than those CWS prepared from samples with a mono-modal particle distribution. The ash content of Australian coal is 21.72g higher than the ash content of Shenhua coal. The highest coal concentration in slurry from the Australia coal is 11.01% higher than in CWS from the Shenhua coat. The fluidity and stability of the CWS prepared from the Australian coal are both better than the fluidity and stability of slurry prepared from Shenhua coal. High ash content in the Australian coal imnroves the nulning results of a CWS made from it.展开更多
In recent years, studies show that coal formed during marine transigression process is also important in coal accumulation basin. Still, the characteristics of coal formation is more clearly demonstrated by the coal f...In recent years, studies show that coal formed during marine transigression process is also important in coal accumulation basin. Still, the characteristics of coal formation is more clearly demonstrated by the coal formation in TST in the sequence stratigraphic framework. Based on the study of the characteristics of coal formation in epicontinental coal accumulation basin, the viewpoint that coal was formed under marine transgression was put forward by the authors and the mechenism thereof was also analyized. Marine transgression resulted in the forming of swamp and then the peat swamp. And the transgression later on put the peat formed in advance in deep water environment to form coal in the end. The important stratigraphic horrizons, such as coal seams, marine facies layers, formed with marine transgression are of the property of isochronism.展开更多
This study reports the anatomical structures of a kind of lepidodendralean stem in coal balls from the early Early Permian Taiyuan Formation in Yanzhou Mining District, southwestern Shandong Province, North China. The...This study reports the anatomical structures of a kind of lepidodendralean stem in coal balls from the early Early Permian Taiyuan Formation in Yanzhou Mining District, southwestern Shandong Province, North China. The leaf cushion is slightly rhomboid in outline with a height of 9 - 10 mm and a width of 7.5 9.0 mm and its lower sides are slightly longer than the upper ones. The top and basic angles of the leaf cushion are truncate and the basic angle is slightly elongate. The upper part of the leaf cushion is strongly high-rising. The leaf sear is large and lenticular in shape. The leaf trace is wide and V-shaped in the leaf scar, and horizontally elongate within the leaf cushion. The leaf trace and lateral parichnos strand extend at a nearly horizontal course outward within the leaf cushion. The ligular pit is deep and extends outward at an oblique course and its aperture is located near the top angle of the leaf scar. No infrafoliar parichnos strands are present. The stem is probably siphonostelic and its pith is probably parenchymatous. The primary xylem is exarch with a nearly smooth outer margin. Only the outer cortex is present and it consists of alternately-arranged radial cell bands and gaps within which the are-shaped or V-shaped leaf traces can be seen. The concave side of the leaf trace is toward the center of the stem. No bundle sheath is developed. Periderm is well-developed and consists of phelloderm and phellem in nearly equal thickness. Compared with the lepidodendralean stems of the Cathaysian and Euramerican Floras, the present specimens are most close to an impression-compression species Lepidodendron pulchrum Zhang in morphology of the leaf cushion and they are put into this species temporarily. Whether the present specimens or the type specimens of L. pulchrum are very different from Lepidodendron Sternburg sensu DiMichele, thus the correct nomenclature and classification of L. pulchrum needs to be reconsidered based on the study of better- and anatomically-preserved stems and fertile organs in the future. Because 'L'. pulchrum possesses the mixed features of several genera of Euramerican lepidodendralean stems, it bears significance to study the origin and evolution of the Cathaysian lepidodendralean lycopods.展开更多
Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines. As part of the ...Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines. As part of the effort to develop better technologies to safeguard mines, the use of active barrier systems was investigated at Kloppersbos in South Africa. The system is designed to meet the requirements of the European Standard （EN 14591-4 2007） as well as the Mine Safety Standardisation in the Ministry of Coal Industry, Coal Industrial 1 Standard of the Peoples Republic of China （MT 694-1997）. From the tests conducted, it can be concluded that the ExploSpot System was successful in stopping flame propagation for both methane and methane and coal dust hybrid explosions when ammonium phosphate powder was used as the suppression material. The use of this barrier will provide coal mine management with an additional explosion control close to the point of ignition and may find application within longwall faces further protecting mines against the risk of an explosion propagating throughout a mine.展开更多
文摘Three kinds of anatomically_preserved lepidodendralean leaves from Permian coal balls of China were studied. They all have double xylem strands, which is consistent with the genus Sigillariopsis Scott. Compared with the species of Sigillariopsis , they are considered as three new species: S. shanxiensis sp. nov. and S. taiyuanensis sp. nov. from Coal Seam 7 in the upper part of the Taiyuan Formation (lower Lower Permian), Xishan Coal Field, Taiyuan, Shanxi Province and S. guizhouensis sp. nov. from Coal Seam 1 in the Wangjiazhai Formation (upper Upper Permian), Shuicheng Coal Mining District, Guizhou Province. Based on the associated organs of lepidodendraleans other than leaves and the information of the Euramerican lepidodendraleans, the affinities of the three new species of Sigillariopsis are discussed and they are probably leaves of Sigillaria Brongniart. In Euramerican Flora, Sigillaria (including its leaves Sigillariopsis ) mainly lived in the Carboniferous period and in the Cathaysian Flora they lived in the Upper Carboniferous to upper Upper Permian periods in rare localities. The leaves and fertile organs of Sigillaria have not been reported from the Cathaysian Flora to date. Three new species of the Permian anatomically_preserved leaves of Sigillaria not only increase the diversity of the Cathaysian sigillarian but also bear important significance on the evolution of sigillarian plants and the relationship of the Cathaysian and Euramerican lepidodendraleans.
文摘The isolated and anatomically_preserved lepidodendralean leaf cushions were described from coal balls in Wangjiazhai Formation (upper Upper Permian) in western Guizhou Province. These leaf cushions are very similar to Lepidodendron lepidophloides Yao both in size and morphology. They probably belong to the same species in different preservative condition. Comparisons on morphology and anatomy of L. lepidophloides and lepidodendralean leaf cushion genera, such as Lepidodendron, Lepidophloios, Sigillaria and Cathaysiodendron revealed that L. lepidophloides possesses mixed features of all these genera and it can not be assigned into any of them without doubt. It probably represents a new genus. Because the anatomical features of the other parts of the stem as well as the fertile organs related to these leaf cushions are unknown, the specific name L. lepidophloides is adopted. We leave this taxonomic problem open till the relationship between these leaf cushions and the stem and fertile organs become clear. This is the first report on the detailed anatomical features of the Cathaysian lepidodendralean leaf cushions.
基金supported by the National Natural Science Foundation of China(Nos.41304096 and 41176077)the National Science and Technology Major Project of China(No.2016ZX05024-001-002)+2 种基金the National High-tech R&D Program of China(863 ProgramNo.2013AA0925 01)the Fundamental Research Funds for the Central Universities(No.201762019)
文摘Estimation of S-wave velocity using logging data has mainly been performed for sandstone, mudstone and oil and gas strata, while its application to hydrate reservoirs has been largely overlooked. In this paper we present petxophysical methods to estimate the S-wave velocity of hydrate reservoirs with the P-wave velocity and the density as constraints. The three models used in this paper are an equivalent model （MBGL）, a three-phase model （TPBE）, and a thermo-elasticity model （TEM）. The MBGL model can effectively describe the internal relationship among the components of the rock, and the estimated P-wave velocities are in good agreement with the measured data （2.8% error）. However, in the TPBE model, the solid, liquid and gas phases axe considered to be independent of each other, and the estimation results are relatively low （46.6% error）. The TEM model is based on the sensitivity of the gas hydrate to temperature and pressure, and the accuracy of the estimation results is also high （3.6% error）. Before the estimation, the occurrence patterns of hydrates in the Shenhu area were examined, and occurrence state one （the hydrate is in solid form in the reservoir） was selected for analysis. By using the known P-wave velocity and density as constraints, a reasonable S-wave velocity value （ranging from 400 to 1100 m s 1 and for a hydrate layer of 1100 m s 1） can be obtained through multiple iterations. These methods and results provide new data and technical support for further research on hydrates and other geological features in the Shenhu area.
文摘To optimize the technological parameter of underground coal gasification （UCG）, the experimental results of air gasification, air-steam gasification, oxygen-enrichment steam gasification, pure oxygen steam gasification and two-stage gasification were studied contrastively based on field trial at the Huating UCG project. The results indicate that the average low heat value of gas from air experiment is the lowest （4.1 MJ/Nm3） and the water gas from two-stage gasification experiment is the highest （10.72 MJ/Nm3）. The gas productivity of air gasification is the highest and the pure oxygen steam gasification is the lowest. The gasification efficiency of air gasification, air-steam gasification, oxygen-enriched steam gasification, pure oxygen steam gasification and two-stage gasification is listed in ascending order, ranging from 69.88% to 84.81%. Described a contract study on results of a field test using steam and various levels of oxygen enrichment of 21%, 32%, 42% and 100%. The results show that, with the increasing of O2 content in gasifying agents, the gas caloricity rises, and the optimal O2 concentration range to increase the gas caloricity is 30%-40%. Meanwhile, the consumption of O2 and steam increase, and the air consumption and steam decomposition efficiency fall.
基金Supported by the National Natural Science Foundation of China(40674017,50534080)the Open Fund of State Key Laboratory of Coal Resources and Safe Mining(2007-04)+1 种基金the Open Doctor Innovation Fund of Shandong Province(200703020)the Chinese Postdoctoral Science Fundation(20080440304)
文摘Under two rock strata combination conditions, over 10,000 microseismic events were received with microseismic location monitoring technology which possessed by the author＇s studying team, used in fully mechanized coal face of Huafeng Mine of Xinwen Coal Mining Group Co., Shandong Province. On the basis of the achievement of the location results, the conclusions were drawn as follows： On the basis of the achievement of 3D strata fracturing situation and the section plane of microseimic events in different areas, the relationship between spatial structure of overlying strata and mining pressure field was found, and we might describe distribution range of dynamic pressure of advance pressure and lateral stress around long face, and range of structure ad-tivation. Quantitative guidance to prevent dynamic disasters was provided. The practice in coal mine got a effective results. According to the FLAG3D soft numerical simulation of diameter drilling hole （the diameter is 300 mm） to relieve pressure in specified geological condition in Huafeng Mine, the right distance of two dirlls is 2.5 m and the right depth is 12 m. The research pro-vided basic guiding and practical experiences for the underground microseismic monitoring and disaster prevention in side slopes or tunnels engineering.
基金received funding from the Australian Government as part of the Asia-Pacific Partnership on Clean Development and Climate
文摘Two coal samples of similar rank were chosen from Australia and China to investigate the differences in Coal-Water Slurry （CWS） made from them. The effect of ash content and particle size gradation on these properties was also studied. Different grinding times were used when grinding the two coals and particle size analysis of these ground coals was used to select samples with a ＂double-peak＂ particle size distri- bution. All the ＂double-peak＂ samples were used to prepare a CWS. The concentration, viscosity, fluidity, and stability of each CWS were measured. The results show that the properties ofa CWS prepared from a coal sample with a ＂double-peak＂ size distribution are better than those CWS prepared from samples with a mono-modal particle distribution. The ash content of Australian coal is 21.72g higher than the ash content of Shenhua coal. The highest coal concentration in slurry from the Australia coal is 11.01% higher than in CWS from the Shenhua coat. The fluidity and stability of the CWS prepared from the Australian coal are both better than the fluidity and stability of slurry prepared from Shenhua coal. High ash content in the Australian coal imnroves the nulning results of a CWS made from it.
基金Supported by the 973 Projects under Grant(2002CB211706 and 2003 CB214608)
文摘In recent years, studies show that coal formed during marine transigression process is also important in coal accumulation basin. Still, the characteristics of coal formation is more clearly demonstrated by the coal formation in TST in the sequence stratigraphic framework. Based on the study of the characteristics of coal formation in epicontinental coal accumulation basin, the viewpoint that coal was formed under marine transgression was put forward by the authors and the mechenism thereof was also analyized. Marine transgression resulted in the forming of swamp and then the peat swamp. And the transgression later on put the peat formed in advance in deep water environment to form coal in the end. The important stratigraphic horrizons, such as coal seams, marine facies layers, formed with marine transgression are of the property of isochronism.
文摘This study reports the anatomical structures of a kind of lepidodendralean stem in coal balls from the early Early Permian Taiyuan Formation in Yanzhou Mining District, southwestern Shandong Province, North China. The leaf cushion is slightly rhomboid in outline with a height of 9 - 10 mm and a width of 7.5 9.0 mm and its lower sides are slightly longer than the upper ones. The top and basic angles of the leaf cushion are truncate and the basic angle is slightly elongate. The upper part of the leaf cushion is strongly high-rising. The leaf sear is large and lenticular in shape. The leaf trace is wide and V-shaped in the leaf scar, and horizontally elongate within the leaf cushion. The leaf trace and lateral parichnos strand extend at a nearly horizontal course outward within the leaf cushion. The ligular pit is deep and extends outward at an oblique course and its aperture is located near the top angle of the leaf scar. No infrafoliar parichnos strands are present. The stem is probably siphonostelic and its pith is probably parenchymatous. The primary xylem is exarch with a nearly smooth outer margin. Only the outer cortex is present and it consists of alternately-arranged radial cell bands and gaps within which the are-shaped or V-shaped leaf traces can be seen. The concave side of the leaf trace is toward the center of the stem. No bundle sheath is developed. Periderm is well-developed and consists of phelloderm and phellem in nearly equal thickness. Compared with the lepidodendralean stems of the Cathaysian and Euramerican Floras, the present specimens are most close to an impression-compression species Lepidodendron pulchrum Zhang in morphology of the leaf cushion and they are put into this species temporarily. Whether the present specimens or the type specimens of L. pulchrum are very different from Lepidodendron Sternburg sensu DiMichele, thus the correct nomenclature and classification of L. pulchrum needs to be reconsidered based on the study of better- and anatomically-preserved stems and fertile organs in the future. Because 'L'. pulchrum possesses the mixed features of several genera of Euramerican lepidodendralean stems, it bears significance to study the origin and evolution of the Cathaysian lepidodendralean lycopods.
文摘Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines. As part of the effort to develop better technologies to safeguard mines, the use of active barrier systems was investigated at Kloppersbos in South Africa. The system is designed to meet the requirements of the European Standard （EN 14591-4 2007） as well as the Mine Safety Standardisation in the Ministry of Coal Industry, Coal Industrial 1 Standard of the Peoples Republic of China （MT 694-1997）. From the tests conducted, it can be concluded that the ExploSpot System was successful in stopping flame propagation for both methane and methane and coal dust hybrid explosions when ammonium phosphate powder was used as the suppression material. The use of this barrier will provide coal mine management with an additional explosion control close to the point of ignition and may find application within longwall faces further protecting mines against the risk of an explosion propagating throughout a mine.
