Reliability and wear resistance of cutting picks play a significant role in coal mine exploitation with coal shearers.Tool bit separation,blade breaking,severe erosion of the cutting body and fatigue fractures are the...Reliability and wear resistance of cutting picks play a significant role in coal mine exploitation with coal shearers.Tool bit separation,blade breaking,severe erosion of the cutting body and fatigue fractures are the main reasons for failure of cutting picks.We carried out carburization on a 30CrMnMo alloy to synthesize a new cutting pick material with improved mechanical properties and high wear resistance.The results indicated that carburization can effectively strengthen the surface of the 30CrMnMo alloy by forming a thick carburized layer and thus significantly improve the surface hardness and wear resistance.In addition,the excellent toughness of 30CrMnMo alloy as a substrate of cutting picks can prevent brittle ruptures and fatigue fractures under high impact stress conditions.The significant decrease in both frictional coefficient and rate of erosion of this carburized 30CrMnMo alloy suggests that this alloy is a potential material for cutting picks of coal shearers after rational carburization.展开更多
The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the prese...The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the presence of Ni（NO3）2. The MCAC materials were characterized by a vibrating sample magnetometer （VSM）, X-ray diffraction （XRD）, a scanning electric microscope （SEM）, and by N2 adsorption. The cylindri- cal precursors and derived char were also subjected to thermogravimetric analysis to compare their behavior of weight losses during carbonization. The results show that MCAC has a larger surface area （1074 m21g） and a higher pore volume （0.5792 cm3/g） with enhanced mesopore ratio （by about 10~）. It also has a high saturation magnetization （1.6749 emu/g） and low coercivity （43.26 Oe）, which allows the material to be magnetically separated. The MCAC is easily magnetized because the nickel salt is con- vetted into Ni during carbonization and activation. Metallic Ni has a strong magnetism on account of electrostatic interaction. Added Ni（NO3）2 catalyzes the carbonization and activation process by accelerat- ing burn off of the carbon, which contributes to the development of mesopores and macropores in the activated carbon.展开更多
Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture wh...Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture which hinder the value of the coal product. Coal preparation plants typically employ several parallel circuits of cleaning and dewatering operations, with each circuit designed to optimally treat a specific size range of coal. Recent innovations in coal preparation have increased the efficiency and capac- ity of individual unit operations while reinforcing the standard parallel cleaning approach. This article, which describes the historical influences and state-of-the-art design for the various coal preparation unit operations, is organized to distinguish between coarse/intermediate coal cleaning and fine/ultrafine coal cleaning. Size reduction, screening, classification, cleaning, dewatering, waste disposal unit operations are particularly highlighted, with a special focus on the LI.S. design philosophy. Notable differences between the U.S. and international operations are described as appropriate.展开更多
This study was to examine the influence of reactions of char–O2and char–steam on the char reactivity evolution.A newly-designed fixed-bed reactor was used to conduct gasification experiments using Victorian brown co...This study was to examine the influence of reactions of char–O2and char–steam on the char reactivity evolution.A newly-designed fixed-bed reactor was used to conduct gasification experiments using Victorian brown coal at800 °C. The chars prepared from the gasification experiments were then collected and subjected to reactivity characterisation(ex-situ reactivity) using TGA(thermogravimetric analyser) in air. The results indicate that the char reactivity from TGA was generally high when the char experienced intensive gasification reactions in 0.3%O2in the fixed-bed reactor. The addition of steam into the gasification not only enhanced the char conversion significantly but also reduced the char reactivity dramatically. The curve shapes of the char reactivity with involvement of steam were very different from that with O2 gasification, implying the importance of gasifying agents to char properties.展开更多
基金the Youth Foundation of China University of Mining & Technology (No.2009A056)the Tribology Science Fund from State Key Laboratory of Tribology at Tsinghua University (No.SKLTKF08A01)+1 种基金the National Natural Science Foundation of China (Nos.50905180 and 51005234)the National Science and Technology Pillar Program in the Eleventh Five-Year Plan Period (No.2008BAB36B02)
文摘Reliability and wear resistance of cutting picks play a significant role in coal mine exploitation with coal shearers.Tool bit separation,blade breaking,severe erosion of the cutting body and fatigue fractures are the main reasons for failure of cutting picks.We carried out carburization on a 30CrMnMo alloy to synthesize a new cutting pick material with improved mechanical properties and high wear resistance.The results indicated that carburization can effectively strengthen the surface of the 30CrMnMo alloy by forming a thick carburized layer and thus significantly improve the surface hardness and wear resistance.In addition,the excellent toughness of 30CrMnMo alloy as a substrate of cutting picks can prevent brittle ruptures and fatigue fractures under high impact stress conditions.The significant decrease in both frictional coefficient and rate of erosion of this carburized 30CrMnMo alloy suggests that this alloy is a potential material for cutting picks of coal shearers after rational carburization.
基金support by the National Natural Science Foundation of China (No. 20776150)the National Hi-Tech Research and Development Program of China(No. 2008AA05Z308)the Special Fund for Basic Scientific Research of Central Colleges (No. 2009QH15)
文摘The role of Nil（NO3）2 in the preparation of a magnetic activated carbon is reported in this paper. Magnetic coal-based activated carbons （MCAC） were prepared from Taixi anthracite with low ash content in the presence of Ni（NO3）2. The MCAC materials were characterized by a vibrating sample magnetometer （VSM）, X-ray diffraction （XRD）, a scanning electric microscope （SEM）, and by N2 adsorption. The cylindri- cal precursors and derived char were also subjected to thermogravimetric analysis to compare their behavior of weight losses during carbonization. The results show that MCAC has a larger surface area （1074 m21g） and a higher pore volume （0.5792 cm3/g） with enhanced mesopore ratio （by about 10~）. It also has a high saturation magnetization （1.6749 emu/g） and low coercivity （43.26 Oe）, which allows the material to be magnetically separated. The MCAC is easily magnetized because the nickel salt is con- vetted into Ni during carbonization and activation. Metallic Ni has a strong magnetism on account of electrostatic interaction. Added Ni（NO3）2 catalyzes the carbonization and activation process by accelerat- ing burn off of the carbon, which contributes to the development of mesopores and macropores in the activated carbon.
文摘Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture which hinder the value of the coal product. Coal preparation plants typically employ several parallel circuits of cleaning and dewatering operations, with each circuit designed to optimally treat a specific size range of coal. Recent innovations in coal preparation have increased the efficiency and capac- ity of individual unit operations while reinforcing the standard parallel cleaning approach. This article, which describes the historical influences and state-of-the-art design for the various coal preparation unit operations, is organized to distinguish between coarse/intermediate coal cleaning and fine/ultrafine coal cleaning. Size reduction, screening, classification, cleaning, dewatering, waste disposal unit operations are particularly highlighted, with a special focus on the LI.S. design philosophy. Notable differences between the U.S. and international operations are described as appropriate.
基金Support by the Victorian State Government under its Energy Technology Innovation Strategy programme and the 12th Five-Year Plan of National Science and Technology of China(2012BAA04B02)
文摘This study was to examine the influence of reactions of char–O2and char–steam on the char reactivity evolution.A newly-designed fixed-bed reactor was used to conduct gasification experiments using Victorian brown coal at800 °C. The chars prepared from the gasification experiments were then collected and subjected to reactivity characterisation(ex-situ reactivity) using TGA(thermogravimetric analyser) in air. The results indicate that the char reactivity from TGA was generally high when the char experienced intensive gasification reactions in 0.3%O2in the fixed-bed reactor. The addition of steam into the gasification not only enhanced the char conversion significantly but also reduced the char reactivity dramatically. The curve shapes of the char reactivity with involvement of steam were very different from that with O2 gasification, implying the importance of gasifying agents to char properties.
