Based on SEM observance,the methods of low-temperature nitrogen and isothermal adsorption were used to test and analyze the coal samples of Hancheng,and pore structure characteristics of tectonic coals were discussed....Based on SEM observance,the methods of low-temperature nitrogen and isothermal adsorption were used to test and analyze the coal samples of Hancheng,and pore structure characteristics of tectonic coals were discussed.The results indicate that in the same coal rank,stratification and crack are well developed in cataclastic coal,which is mostly filled by mineral substance in the geohydrologic element abundance,results in pore connectivity variation.Granulated and mylonitic coal being of these characteristics,as develop microstructures and exogenous fractures as well as large quantity of pores resulted from gas generation and strong impermeability,stimulate the recovery of seepage coal,improve coal connectivity and enhance reservoir permeability.Absorption pore(micro-pore) is dominant in coal pore for different coal body structure,the percentage of which pore aperture is from 1 to 100 nm is 71.44% to 88.15%,including large of micro-pore with the 74.56%-94.70%;with the deformation becoming more intense in the same coal rank,mesopore enlarge further,open-end pores become thin-neck-bottle-shaped pores step by step,specific surface area of micro-pore for cataclastic coal is 0.0027 m 2 /g,while mylonitic coal increases to 7.479 m 2 /g,micro-pore gradually play a dominant role in effecting pore structural parameters.展开更多
Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of t...Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of this work is to analyze the quality of Indian Coals and obtain their mineral species-specific information at different depths. The samples were obtained from Talcher Coalfield, Odisha, India. Coal from four seam sections in the Talcher coalfield, India are mainly high ash coal （〉50 %） and volatile matter deceases along with the seam depth. XRD results show that the major mineral phases present in the coal are quartz and kaolinite. Siderite, illite, and anatase were found in minor quantities. It has been observed that the clay minerals （kaolinite, silimanite, illite） decompose at higher temperature and traces of dolomite, mullite, hematite etc. are formed during the process of combustion. Among the four seams （M2, M12, M24 and M43） studied, ash of M43 has high A1203%, TIO2% and K20% content and low SIO2%, CaO% and MgO% content. High acid- to-base ratios contributed to high ash fusion temperatures （IDT 〉 1500 ℃） and low slagging potential of the coals studied. Relatively low fouling index （〈0.3） was estimated for all the coal seams studied. Furthermore, thermodynamic modeling software, FactSage, have been used to envision the mineral phase transformations that take place between 800 and 1500℃ during coal combustion.展开更多
基金funded by the National Major Research Program for Science and Technology of China (Nos. 2009ZX05062and 2011ZX05062-009)
文摘Based on SEM observance,the methods of low-temperature nitrogen and isothermal adsorption were used to test and analyze the coal samples of Hancheng,and pore structure characteristics of tectonic coals were discussed.The results indicate that in the same coal rank,stratification and crack are well developed in cataclastic coal,which is mostly filled by mineral substance in the geohydrologic element abundance,results in pore connectivity variation.Granulated and mylonitic coal being of these characteristics,as develop microstructures and exogenous fractures as well as large quantity of pores resulted from gas generation and strong impermeability,stimulate the recovery of seepage coal,improve coal connectivity and enhance reservoir permeability.Absorption pore(micro-pore) is dominant in coal pore for different coal body structure,the percentage of which pore aperture is from 1 to 100 nm is 71.44% to 88.15%,including large of micro-pore with the 74.56%-94.70%;with the deformation becoming more intense in the same coal rank,mesopore enlarge further,open-end pores become thin-neck-bottle-shaped pores step by step,specific surface area of micro-pore for cataclastic coal is 0.0027 m 2 /g,while mylonitic coal increases to 7.479 m 2 /g,micro-pore gradually play a dominant role in effecting pore structural parameters.
文摘Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of this work is to analyze the quality of Indian Coals and obtain their mineral species-specific information at different depths. The samples were obtained from Talcher Coalfield, Odisha, India. Coal from four seam sections in the Talcher coalfield, India are mainly high ash coal （〉50 %） and volatile matter deceases along with the seam depth. XRD results show that the major mineral phases present in the coal are quartz and kaolinite. Siderite, illite, and anatase were found in minor quantities. It has been observed that the clay minerals （kaolinite, silimanite, illite） decompose at higher temperature and traces of dolomite, mullite, hematite etc. are formed during the process of combustion. Among the four seams （M2, M12, M24 and M43） studied, ash of M43 has high A1203%, TIO2% and K20% content and low SIO2%, CaO% and MgO% content. High acid- to-base ratios contributed to high ash fusion temperatures （IDT 〉 1500 ℃） and low slagging potential of the coals studied. Relatively low fouling index （〈0.3） was estimated for all the coal seams studied. Furthermore, thermodynamic modeling software, FactSage, have been used to envision the mineral phase transformations that take place between 800 and 1500℃ during coal combustion.
