无烟煤粒度对烧结矿产质量的影响

文章分析了马钢二烧无烟煤破碎的现状,并配用不同粒度组成的无烟煤粉进行了实验室试验,认为在现有破碎工艺条件下,无烟煤中<3mm的含量以65%左右为宜,此时>5mm含量将小于5%。

巴西矿用于承钢烧结矿生产的实验室研究

通过巴西矿和澳矿的对比实验室烧结试验，研究各项指标的变化情况，经过综合分析，配加巴西矿优于澳矿。

考虑原料成本的高炉高喷煤比,低焦比操作

在炼铁部门，降低生成铁成本是非常重要的课题，小仓厂在大量使用廉价原料的前提下，尽力在高炉中采用高喷煤比，低焦比操作技术，为了确立这种技术，必须抑制高炉各部位透气性阻力的上升，因此在各个部位有必要进行适当的煤结矿质量管理。这里，在大量使用廉价的高结晶水矿石和高Ａｌ２Ｏ３矿石的前提下，对使高炉喷煤比达到在１８０ｋｇ／ｔ的烧结矿质量管理的想法，以及在烧结矿质量管理基础上的高喷煤比的实际操作进行了报告。

THE DESIGN AND ACCOMPLISHMENT OF SHOTCRETE ROBOT

The design and accomplishment of shotcrete robot is presented in this paper. This shotcrete robot is the first robot for underground coal mine in our country. It is a specific machine used for spraying concrete in underground coal mine. It has many advantages such as simple structure convenient operation and high reliability. The on-site experiments indicate that the sprayed layer is even, at the same time, the quantity of rebound and dust content decrease largely. The robot can satisfy the requirement of shotcrete process completely.

Prediction Technology of Buried Water-Bearing Structures in Coal Mines Using Transient Electromagnetic Method

Buried water-conducting and water-bearing structures in front of the driving head may easily lead to water bursts in coal mines. Therefore,it is very important for the safety of production to make an accurate and timely forecast about water bursts. Based on the smoke ring effect of transient electromagnetic fields,the principle of transient electro-magnetic method used in detecting buried water-bearing structures in coal mines in advance,is discussed. Small multi-turn loop configurations used in coal mines are proposed and a field procedure of semicircular sector scanning is presented. The application of this method in one coal mine indicates that the technology has many advantages compared with others. The method is inexpensive,highly accurate and efficient. Suggestions are presented for future solutions to some remaining problems.

The relation between modes of lithologic association and interlayer-gliding structures in coal mine

As a case study of the Panji No.1 Coal Mine in Anhui Province, based on thesite measured and statistical data, summarized the lithologic associations, characteristicsand distribution laws of interlayer-gliding structures and tectonic coal in the No.11-2 coalseams.The results show that 9 modes of lithologic association can form interlayer-glidingstructures.It is more easy for rock slip to occur when the lithologic associations are mainroof + coal seam + immediate floor type, compound roof+immediate roof + coal seam +immediate floor type and immediate roof + coal seam + immediate floor type.Lithologicassociations of roof and floor are the precondition to the formation of interlayer-glidingstructures.

Surface and Hydrogen Sorption Characteristics of Various Activated Carbons Developed from Rat Coal Mine （Zonguldak） and Anthracite

Activated carbon samples were developed from coal samples obtained from a coal mine, rat （Zonguldak, Turkey） and anthracite （Siberia, Russia）, applying pyrolysis in a temperature range of 600-900 ℃ under N2 flow, and activation using chemical agents such as KOH, NH4Cl, ZnCl2 at 650 ℃. Nitrogen adsorption at low temperature （77 K） was used to characterize the activated carbon samples, and their pore structure properties including pore volume, pore diameter and pore size distribution were determined by means of the t-plots and DFT methods. The surface area values were higher for rat coal samples than for anthracite one, and for the rat coal samples treated with KOH ＋ NH4Cl ＋ ZnCl2 at 650 °C [Rat650（2）] there are highest surface area and total pore volume, 315.6 m2·g^-1 and 0.156 ml·g^-1, respectively. The highest value of the hydrogen sorption capacity was found as 0.71% （by mass） for the rat coal sample obtained by KOH ＋ ZnCl2 treatment at 650 °C [Rat650（1）].

Study on Production of Hydrogen from Methane for Proton Exchange Membrane Fuel Cell

The hydrogen production from methane for proton exchange membrane fuel cell (PEMFC) was studied experimentally. The conversion rate of methane under different steam carbon ratios, the effect of the different excess air ratios on the constituents of the gas produced, the permeability of hydrogen under different pressure differences, and the effect of different system pressure on the reaction enthalpy of hydrogen were obtained. The results lay the basis for the production of hydrogen applicable to PEMFC, moreover, provide a new way for the comprehensive utilization of the coal bed methane.

Tectonically deformed coal types and pore structures in Puhe and Shanchahe coal mines in western Guizhou

To evaluate the effect of tectonic deformation on coal reservoir properties, we provide an analysis of the types of tectonically deformed coal, macroand microscopic deformation and discuss pore structural characteristics and connectivity based on samples from the Puhe and Shanchahe coal mines. Our research shows that the tectonically deformed coal mostly includes cataclastic structural coal, mortar structural coal and schistose structural coal of a brittle deformation series. The major pore structures of different types of tectonically deformed coal are transitional pores and micropores. The pore volumes of macropores and visible fracture pores produced by structural deformations vary over a large range and increase with the intensity of tectonic deformation. Mesopores as connecting passages develop well in schistose structural coal. According to the shapes of intrusive mercury curves, tectonically deformed coal can be divided into parallel, open and occluded types. The parallel type has poor connectivity and is relatively closed; the open type reflects uniformly developed open pores with good connectivity while the occluded type is good for coalbed methane enrichment, but has poor connectivity between pores.

Pore structure characteristics of the relative water-resisting layer on the top of the Ordovician in Longgu Coal Mine

In order to study the permeability and water-resisting ability of the strata on the top of the Ordovician in Longgu Coal Mine, this paper tested the permeability and porosity of the strata, investigated the fracture and pore structure features of the strata, and identified the main channels which govern the permeability and water-resisting ability of the strata. The permeability of the upper, central and lower strata shows as 2.0504 × 10^-3-2.782762× 10^-3, 4.1092 × 10^-3 -7.3387 × 10^-3 and 2.0891 ×10^-3-3.2705 × 10-3 μm^2, respectively, and porosity of that is 0.6786-0.9197%, 0.3109-0.3951% and 0.9829-1.8655%, respectively. The results indicate that： （I） the main channels of the relative water-resisting layer are the pore throats with a diameter more than 6 μm; （2） the major proportion of pore throats in the vertical flow channel and the permeability first increases and then sharply decreases; （3） the fractures occurring from the top to 20 m in depth of the strata were filled and there occurred almost no fracture under the depth of 40 m; and （4） the ratio of turning point of the main flow channel in the strata on top of Ordovician can be used to confirm the thickness of filled water-resisting lavers.

STUDY ON THE METHODS OF STRUCTURALDYNAMIC MODIFICATION OPTIMIZATION OF ROAD HEADERS

In this paper, taking AM-50 Road Heaer as an example, the metheds of structural dynamic modification optimization for road headers are studied using experimental modal analysis and physical parameters analysis. The machine’s modal model and lumped mass model are established and the vibration response simulation is calculated for the two models with the load spectral measured. On the above basis, the dynamic parameters of the models are optimised and some useful results have been obtained.The research methods in this paper can be used for the reference to the other lager type mining machines.

STRUCTURE AND STABILITY OF MAIN ROOF AFTER ITS FRACTURE

A series of physical modelings in which a main roof is considered as a Kirchhoff plate supported or clammed by Winkler elastic foundation were performed to simulate the fracturing process of the main roof in longwall mining. Based on these modelings spatial structures of the main roof after its fracture are described, blocks of the fractured main roof are classified and their behaviors are analyzed in this paper. Additionally, two stability indexes of the structures are defined, and the factors affecting stability of the structures with different boundaries and geometric conditions are discussed.

Research on time structure characteristic of gas concentration sequence in the working face

In the procedure of coal industry production, the losses of the persons and economy caused by the gas explosion accidents are most serious, therefore, prevention and control of the gas explosion accident of the coal mines is an important issue needed to be solved urgently in the safety production work of our coal mines. The characteristic of time structure variation index characteristic was analyzed about gas concentration sequence of three measure points in the NO. 1I 1024 working face. It was found that the value of time variation about three measure points was mostly 1〈δ≤1.5, and gas emission presented consistently strong-clustering state twice, and the value of time variation presented continuous variation state in the active stage of gas concentration. Complex characteristics of the value indicated gas emission was continuously variable in time or space and presented the complex nonlinear characteristics. So the characteristic about gas emission system was correctly depicted and analyzed to gas emission system according to the relation of its state variation and essential of nonlinear system. The result also provided reliable warranty for its continued nonlinear research on gas emission.

Reducing the Power-Loss in RS-485 Designs

Power loss sometimes needs particular consideration in coal mine. This paper analyzes the main three parts of power consuming of RS 485 system, that is quiescent power consuming, transmission power consuming and peripheral equipment power consuming. How to reduce the power consuming in RS 485 designs is introduced, and also the method of hardware and software design is presented including choosing low power transceiver, optimizing communication data structure, optimizing communication working mode.

SUPPORTING PROCEDURE AND FIELD MEASUREMENT IN THE SHAFT THROUGH GLIDING TECTONIC GROUN

The paper describes mechacal properties and deformation features of shaft adjoining rocks in gliding tectonic ground and presents the shaft-supporting procedure of smooth-wall cushion blasting,preliminary bolting and shotcreting and pouring reioforced coocrete liner in one-time-whole-section on the basis of adjoining rock deformations measured dynamically site. Field measurements of the pressur exerted on shaft wall show that this supponing procedare has enough safety reserve to meet the safety requirements in mining production.

CURRENT TECHNOLOGY AND INNOVATIONS IN FREEZE SHAFT SINKING IN CHINA

This paper gives a brief review of the development of shaft sinking by artificial ground freezing since 1949 when new China was founded. Several shaft freezing schemes which have been successfully applied from the economic and safe viewpoints are presented. Current technology and some innovative techniques, especially the shaft lining which have experienced major improvements over the last four decades ,are briefly reviewed. The technique of the in-situ pour concrete incorporating ailica fume with higher early strength under low temperature curing conditions is described. The temperature field in shaft freezing and its finite difference solution are given in this paper. A recently developed method combining freeze wall model test with back analysis technique based on numerical simulation is also described.

Measurement of shear movements in the overburden strata ahead of longwall mining

An underground coal mine located in New South Wales has a target coal seam located 160-180 m deep directly below a 16-20 m thick conglomerate unit that has been associated with significant periodic weighting events on the Iongwall face. As part of the investigations to better understand the causes of periodic weighting at the mine. inclinometers capable of measuring horizontal shear movements through the full section of the overburden strata were installed ahead of mining at two locations approximately 1 km apart above the centre of two iongwall panels. These inclinometers were monitored as the longwall approached each site. This paper presents the details of the installation, the results of the inclinometer monitoring at both sites, and the insights that these measurements provide for overburden behaviour about longwall panels. Horizontal shear movements were observed to develop on shear horizons that correlate closely across the two sites suggesting a mechanism that is consistent across a large area of the mine. Shear movements were observed to develop on a single horizon near the top of the conglomerate strata that was mobilised almost immediately after initial formation of the longwall goal at a distance of 425 m ahead of the longwall face.

Application of dual structure theory on motivating safe behavior of coal mine staff

Based on behavior science and direct causes analysis of serious accidents in Chinese coal mines in recent 5 years, a conclusion that unsafe behaviors of coal mine staff were the direct causes of these serious accidents was drawn, accounting for 91.3%. If staff was divided into executor and manager, percentages of the executor＇s and manager＇s unsafe behaviors in direct causes of the accidents were 69% and 54%, respectively, with executor＇s unsafe behavior as direct causes and manager＇s unsafe behavior as essential reasons after thorough analysis of these accidents. Further, on the basis of dual structure theory analysis, three new understandings, including transformation, hierarchy classification and representativeness of behavior factors were il- lustrated. Behavior factors of executors and managers in Chinese coal mines were summarized and classified by new recogni- tion. Then, dual structure theory was applied in a coal mine in Hebei Province of China; weakening unsafe behaviors and strengthening safe factors can attain the purpose of motivating safer behaviors in the coal mine.

Failure mechanism of Mesozoic soft rock roadway in Shajihai coal mine and its surrounding rock control

In view of the buckling failure caused by large deformation of Mesozoic soft rock roadway in Shajihai mining area, such as serious roof fall, rib spalling, floor heave, etc., based on the detail site investigation,theoretical analysis, mineral composition test, microstructure test, water-physical property test and field experiments were carried out. And we revealed the compound failure mechanism of Mesozoic soft rock roadway in Shajihai mining area, namely the molecule expansion-shear slip of weak structural plane-construction disturbance. On this basis, the coupling support technology whose core is constant resistance with large deformation bolt was proposed. The feature of this supporting technology is that a new type of structural composite material was used, which makes the supporting system not only has the ideal deformation characteristics, but also has high supporting resistance. Thus the fully release of plastic energy within surrounding rock and reasonable control of the thickness of the plastic ring were realized. Then the differential deformation between the surrounding rock and support was eliminated by the secondary coupling support of bolt–mesh–cable, and the bolt with high strength was applied in the base angle to control floor. Eventually the collaborative bearing system of surrounding rock–support was formed. Through field tests the validity and rationality of support was also verified.

Characteristics and geological genesis of pyrites in coal of Huainan

Using optical microscope and scanning electron microscopy （SEM）, revealed the content of pyrite and the microscopic or sub-microscopic occurrence features of pyrite in coal of Huainan. The samples of this study are from four different mines in Huainan coal field. The results show that, in general, the coal of Huainan is low sulfur coal, but the con- tent of pyrite in Guqiao mine is relatively higher. The occurrence types of pyrite in coal mainly include： strawberry ball pyrites, massive pyrites, tuberculoid pyrite and pyrite filling in cracks or joints. After analysis based on three indicating facies parameters IAA, IS and/R, the reason for the higher level of pyrite component is that the deoxidization of swamp wa- ter is stronger, salinity is greater and the hydrodynamic is bad. The strawberry ball pyrites found in Guqiao mostly formed in the syngenesis stage. The spherical raspberry pyrites symbiotic with clay minerals was formed due to the reaction of H2S with Fe in the grid of silicate crystal.