A novel melting-assisted solvent-free route using solid oxalic acid was proposed for the post-treatment of SAPO-11 zeolite,followed by loading with 0.5 wt%Pt by the incipient wetness impregnation method.Subsequently,t...A novel melting-assisted solvent-free route using solid oxalic acid was proposed for the post-treatment of SAPO-11 zeolite,followed by loading with 0.5 wt%Pt by the incipient wetness impregnation method.Subsequently,the performance of the obtained bifunctional catalysts toward the hydroisomerization of n-dodecane was examined.The prepared samples were characterized by XRD,SEM,BET,XRF,Py-IR,and solid-state NMR.From the results,it was found that the high crystallinity and uniform morphology were retained after the post-treatment and that more(002)crystal faces were exposed,which was beneficial since more acid sites were provided.More importantly,the total Bronsted acid sites and the ratio(Ra)of the micropore area to the total surface area were optimized by this method.Thus,the catalytic performance was enhanced significantly,and the prepared Pt-SAPO-11-10%catalyst had the highest i-dodecane yield of 80.1%compared to 55.3%of Pt-SAPO-11.Expectedly,this facile and cost-effective method is promising for the hydroisomerization of normal paraffin in the production of lubricant base oils.展开更多
Additive manufacturing(AM),also known as 3D-printing(3DP)technology,is an advanced manufacturing technology that has developed rapidly in the past 40 years.However,the ceramic material printing is still challenging be...Additive manufacturing(AM),also known as 3D-printing(3DP)technology,is an advanced manufacturing technology that has developed rapidly in the past 40 years.However,the ceramic material printing is still challenging because of the issue of cracking.Indirect 3D printing has been designed and drawn attention because of its high manufacturing speed and low cost.Indirect 3D printing separates the one-step forming process of direct 3D printing into binding and material sintering,avoiding the internal stress caused by rapid cooling,making it possible to realize the highquality ceramic component with complex shape.This paper presents the research progress of leading indirect 3D printing technologies,including binder jetting(BJ),stereolithography(SLA),and fused deposition modeling(FDM).At present,the additive manufacturing of ceramic materials is mainly achieved through indirect 3D printing technology,and these materials include silicon nitride,hydroxyapatite functional ceramics,silicon carbide structural ceramics.展开更多
A three dimension of dynamic mathematical model of the molten carbonate fuel cell is established,in which the heat generation, mass transfer and electrochemical characteristics are described. The performance of the fu...A three dimension of dynamic mathematical model of the molten carbonate fuel cell is established,in which the heat generation, mass transfer and electrochemical characteristics are described. The performance of the fuel cell including the distributions of the temperature and the velocity is predicted numerically. Then the experimental data including the output performance of the fuel cell generation system and the temperature distributions are compared. The numerical results are in agreement with the experiment results.展开更多
基金supported by the National Natural Science Foundation of China(21776295)the Youth Innovation Promotion Association,CAS(2017355)~~
文摘A novel melting-assisted solvent-free route using solid oxalic acid was proposed for the post-treatment of SAPO-11 zeolite,followed by loading with 0.5 wt%Pt by the incipient wetness impregnation method.Subsequently,the performance of the obtained bifunctional catalysts toward the hydroisomerization of n-dodecane was examined.The prepared samples were characterized by XRD,SEM,BET,XRF,Py-IR,and solid-state NMR.From the results,it was found that the high crystallinity and uniform morphology were retained after the post-treatment and that more(002)crystal faces were exposed,which was beneficial since more acid sites were provided.More importantly,the total Bronsted acid sites and the ratio(Ra)of the micropore area to the total surface area were optimized by this method.Thus,the catalytic performance was enhanced significantly,and the prepared Pt-SAPO-11-10%catalyst had the highest i-dodecane yield of 80.1%compared to 55.3%of Pt-SAPO-11.Expectedly,this facile and cost-effective method is promising for the hydroisomerization of normal paraffin in the production of lubricant base oils.
基金Project(51901020)supported by the National Natural Science Foundation of ChinaProject(2019JZZY010327)supported by Shandong Key Research and Development Plan,China+1 种基金Project(201942074001)supported by Aeronautical Science Foundation of ChinaProject(FRF-IP-20-05)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Additive manufacturing(AM),also known as 3D-printing(3DP)technology,is an advanced manufacturing technology that has developed rapidly in the past 40 years.However,the ceramic material printing is still challenging because of the issue of cracking.Indirect 3D printing has been designed and drawn attention because of its high manufacturing speed and low cost.Indirect 3D printing separates the one-step forming process of direct 3D printing into binding and material sintering,avoiding the internal stress caused by rapid cooling,making it possible to realize the highquality ceramic component with complex shape.This paper presents the research progress of leading indirect 3D printing technologies,including binder jetting(BJ),stereolithography(SLA),and fused deposition modeling(FDM).At present,the additive manufacturing of ceramic materials is mainly achieved through indirect 3D printing technology,and these materials include silicon nitride,hydroxyapatite functional ceramics,silicon carbide structural ceramics.
基金Supported by Shanghai Science and Technology Development (No. 993012003) and the National Natural Science Foundation of China (No.50206012).
文摘A three dimension of dynamic mathematical model of the molten carbonate fuel cell is established,in which the heat generation, mass transfer and electrochemical characteristics are described. The performance of the fuel cell including the distributions of the temperature and the velocity is predicted numerically. Then the experimental data including the output performance of the fuel cell generation system and the temperature distributions are compared. The numerical results are in agreement with the experiment results.
