With focus on investigating the effect of combustor scale on the conversion of fuel-N to NOx and N20, experiments are carried out in three combustors, including single coal particle combustion test rig, laboratory sca...With focus on investigating the effect of combustor scale on the conversion of fuel-N to NOx and N20, experiments are carried out in three combustors, including single coal particle combustion test rig, laboratory scale circulating fluidized-bed boiler （CFB） and full scale CFB in this work. For single coal particle combustion, the majority of f-uel-N （65%-82%） is released as NOx, while only a little （less than 8%） fuel-N yields N20. But in labora- tory scale CFB, the conversion of fuel-N to N20 is increases, but the conversion of fuel-N to NOx is quite less than that of single coal particle combustion. This is because much char in CFB can promote the NOx reduction by in- creasing N20 formation. In full scale CFB, both of the conversion of fuel-N to NOx and the conversion of fuel-N to N20 are smaller than laboratory scale CFB.展开更多
Coal is still a major source of energy, also a major source of SO_2, NOx and CO_2 emission though. Removal of SO_2 and NOx doubled the cost of power generation, and capture of CO_2 is equivalent to double the market p...Coal is still a major source of energy, also a major source of SO_2, NOx and CO_2 emission though. Removal of SO_2 and NOx doubled the cost of power generation, and capture of CO_2 is equivalent to double the market price of power coal. The GCP （green coal power） is the power generated in coal-combustion with zero emission. The author indicates that it is possible to make coal-fired power plants emission free based on thermodynamic analysis and purposely designed experiments using SFG （simulated flue gases）. It is concluded in the study that all SO_2 and NOx in the post-combustion flue gas are reduced to inoffensive substances at temperature lower than 750 ℃ when contacting carbon and elemental sulfur is separated in succeeded cooling of flue gas at temperatures 200-400 ℃, and the ultrafine dusts are trapped in condensed water at temperature blow 100 ℃. Based on chemical engineering expertise the author is sure that the cost for removing acid gases is much lower than any clean coal technologies known to today. Instead of capture, the remained CO_2 is converted to CO in the second time contact with carbon at 900-950 ℃. CO is the raw material of chemical synthesis and, thus, CO_2 is stored in chemical products such as methanol, fertilizer, plastics, etc. The simple and low-cost processing allows GCP utilized in practice easily.展开更多
基金Supported by the National Basic Research Program of China(2009CB219802)
文摘With focus on investigating the effect of combustor scale on the conversion of fuel-N to NOx and N20, experiments are carried out in three combustors, including single coal particle combustion test rig, laboratory scale circulating fluidized-bed boiler （CFB） and full scale CFB in this work. For single coal particle combustion, the majority of f-uel-N （65%-82%） is released as NOx, while only a little （less than 8%） fuel-N yields N20. But in labora- tory scale CFB, the conversion of fuel-N to N20 is increases, but the conversion of fuel-N to NOx is quite less than that of single coal particle combustion. This is because much char in CFB can promote the NOx reduction by in- creasing N20 formation. In full scale CFB, both of the conversion of fuel-N to NOx and the conversion of fuel-N to N20 are smaller than laboratory scale CFB.
文摘Coal is still a major source of energy, also a major source of SO_2, NOx and CO_2 emission though. Removal of SO_2 and NOx doubled the cost of power generation, and capture of CO_2 is equivalent to double the market price of power coal. The GCP （green coal power） is the power generated in coal-combustion with zero emission. The author indicates that it is possible to make coal-fired power plants emission free based on thermodynamic analysis and purposely designed experiments using SFG （simulated flue gases）. It is concluded in the study that all SO_2 and NOx in the post-combustion flue gas are reduced to inoffensive substances at temperature lower than 750 ℃ when contacting carbon and elemental sulfur is separated in succeeded cooling of flue gas at temperatures 200-400 ℃, and the ultrafine dusts are trapped in condensed water at temperature blow 100 ℃. Based on chemical engineering expertise the author is sure that the cost for removing acid gases is much lower than any clean coal technologies known to today. Instead of capture, the remained CO_2 is converted to CO in the second time contact with carbon at 900-950 ℃. CO is the raw material of chemical synthesis and, thus, CO_2 is stored in chemical products such as methanol, fertilizer, plastics, etc. The simple and low-cost processing allows GCP utilized in practice easily.
