According to 350 MW and 600 MW boilers,under oxygen fuel condition,through the reasonable control of the primary and secondary flow and the correct option and revision of mathematical model,the temperature distributio...According to 350 MW and 600 MW boilers,under oxygen fuel condition,through the reasonable control of the primary and secondary flow and the correct option and revision of mathematical model,the temperature distribution,heat flux distribution and absorption heat distribution,etc.was obtained which compared with those under air condition.Through calculation,it is obtained that the primary and secondary flow mixed well,good tangentially fired combustion in furnace was formed,the temperature under air condition obviously higher than the temperature under O26 condition.The adiabatic flame temperature of wet cycle was slightly higher than that of dry cycle.The maximum heat load appeared on the waterwall around the burner area.The heat load gradually decreased along the furnace height up and down in burner area.The heat absorption capacity of the furnace under O26 was lower than that under the air condition.The heat absorption capacity of the platen heating surface under 026 was equal to that under air condition.And the heat absorbing capacity of waterwall under O26 was about 7%~12% less than that under air condition.展开更多
文摘According to 350 MW and 600 MW boilers,under oxygen fuel condition,through the reasonable control of the primary and secondary flow and the correct option and revision of mathematical model,the temperature distribution,heat flux distribution and absorption heat distribution,etc.was obtained which compared with those under air condition.Through calculation,it is obtained that the primary and secondary flow mixed well,good tangentially fired combustion in furnace was formed,the temperature under air condition obviously higher than the temperature under O26 condition.The adiabatic flame temperature of wet cycle was slightly higher than that of dry cycle.The maximum heat load appeared on the waterwall around the burner area.The heat load gradually decreased along the furnace height up and down in burner area.The heat absorption capacity of the furnace under O26 was lower than that under the air condition.The heat absorption capacity of the platen heating surface under 026 was equal to that under air condition.And the heat absorbing capacity of waterwall under O26 was about 7%~12% less than that under air condition.
