新能源驱动未来——必比登挑战赛

如果说二十世纪汽车为经济发展和城乡交通作出了巨大贡献，那么今天汽车工业肩负着使命就是环境与安全。作为减少汽车能耗和噪音的重要部件——轮胎也面临着新的挑战。为了确保汽车的移动性不会耗尽我们的资源和破坏环境。在1998年轮胎人必比登诞生一百周年之际，米其林公司创办了米其林必比登挑战赛。它为全球汽车厂商提供了可靠而及时的展示多种清洁燃料汽车的平台。

Complete Modeling for Systems of a Marine Diesel Engine

This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided into several functional blocks： cooling, lubrication, air, injection, combustion and emissions. The sub-models and dynamic characteristics of individual blocks are established according to engine working principles equations and experimental data collected from a marine diesel engine test bench for SIMB Company under the reference 6M26SRP1. The overall engine system dynamics is expressed as a set of simultaneous algebraic and differential equations using sub-blocks and S-Functions of Matlab/Simulink. The simulation of this model, implemented on Matlab/Simulink has been validated and can be used to obtain engine performance, pressure, temperature, efficiency, heat release, crank angle, fuel rate, emissions at different sub-blocks. The simulator will be used, in future work, to study the engine performance in faulty conditions, and can be used to assist marine engineers in fault diagnosis and estimation （FDI） as well as designers to predict the behavior of the cooling system, lubrication system, injection system, combustion, emissions, in order to optimize the dimensions of different components. This program is a platform for fault simulator, to investigate the impact on sub-blocks engine＇s output of changing values for faults parameters such as： faulty fuel injector, leaky cylinder, worn fuel pump, broken piston rings, a dirty turbocharger, dirty air filter, dirty air cooler, air leakage, water leakage, oil leakage and contamination, fouling of heat exchanger, pumps wear, failure of injectors （and many others）.

Performance of Tractor Diesel Engine with Animal-Fats Biodiesel

Animal fats biodiesel were manufactured and tested for its performance in the tractor engine and fuel adoptability in the field works. Four different fuels, three different content of biodiesel （BD20, BD50 and BD100） and light oil, were prepared and tested in the four strokes diesel engine. Power output, fuel consumption rate and exhaust gases of the four fuels in the diesel engine were compared and discussed. Power output of light oil engine was the greatest showing 5.3% difference between light oil and BDI00. But, almost no power difference between light oil engine and BD20 engine, light oil engine produced 0.37% more power than BD20 engine superior to better power than BD20 engine. Less exhaust gases of CO2, CO, NOx and total hydrocarbon （THC） were produced from animal fats biodiesel than light oil, which confirmed that biodiesel is environmental friendly fuel. For fuel adoptability in the tractor, biodiesel engine tractor showed its fuel competitiveness comparing with light oil for tractor works in the paddy field.

Experimental Tests of the Operating Conditions of a Micro Gas Turbine Device

The aim of this work is to analyze the performance of a commercial micro gas turbine, focusing on the analysis of the fuel consumption and the outlet compressor and turbine temperature at various rpm, and to evaluate and compare the efficiency of the device. A test bench has been assembled with the available equipment in the laboratory of the department of mechanical and aerospace engineering in Roma. By using the software supplied by the manufacturer, the evaluation of the operating performance of the device at different speeds has been performed, obtaining all the values of interest.

Fuel-optimal trajectory design using solar electric propulsion under power constraints and performance degradation

The fuel-optimal transfer trajectories using solar electric propulsion are designed considering the power constraints and solar array performance degradation.Three different performance degradation models including linear,positive and negative exponential degradations are used in the analysis of three typical rendezvous missions including Apophis,Venus and Ceres,respectively.The optimal control problem is formulated using the calculus of variations and Pontryagin’s maximum principle,which leads to a bang-bang control that is solved by indirect method combined with a homotopic technique.In demonstrating the effects of the power constraints and solar array performance degradation on the power budget and fuel consumption,the time histories of the power profile and the fuel consumptions are compared for the three missions.This study indicates that it is necessary to consider the power constraints and solar array performance degradation for the SEP-based low-thrust trajectory design,espacially for long-duration outbound flights.

Development of performance and combustion system of Atkinson cycle internal combustion engine

The application of hybrid vehicle is a practical technical solution to the energy shortage and the environmental pollution.The internal combustion engine(ICE)plays a key role in the development of the hybrid vehicle.Based on the requirements of the hybrid vehicle and the characteristic of Atkinson cycle,a set of designing methods for the Atkinson cycle gasoline engine is presented through the analysis of the optimized matching for the compression ratio,valve timing and the combustion chamber.The designing method has been verified by the bench test and the results show that the fuel consumption can be improved by12%–15%with the reduction of the low speed torque by 10%,and the low fuel consumption region in the fuel map extends significantly with the rated power almost keeping constant.It may be of great reference for the development of hybrid vehicle technology in China.