A membrane-less constructed wetland microbial fuel cell （CW-MFC） is constructed and operated under continuous flow with a hydraulic retention time （HRT） of 2 d. Fed with glucose, the CW-MFC generates a stable curr...A membrane-less constructed wetland microbial fuel cell （CW-MFC） is constructed and operated under continuous flow with a hydraulic retention time （HRT） of 2 d. Fed with glucose, the CW-MFC generates a stable current density of over 2 A/m3 with a resistor of 1 kΩ and has a chemical oxygen demand （COD） removal efficiency of more than 90% after the startup of 2 to 3 d. A series of systems with the electrode spacings of 10, 20, 30 and 40 cm are compared. It is found that the container with the electrode spacing of 20 cm gains the highest voltage of 560 mV, the highest power density of 0. 149 W/m 3, and the highest Coulombic efficiency of 0.313%. It also has the highest COD removal efficiency of 94. 9%. In addition, the dissolved oxygen （DO） concentrations are observed as the lowest level in the middle of all the CW-MFC reactors. The results show that the more COD is removed, the greater power is generated, and the relatively higher Coulombic efficiency will be achieved. The present study indicates that the CW-MFC process can be used as a cost-effective and environmentally friendly wastewater treatment with simultaneous power generation.展开更多
An upflow mode membrane-less microbial fuel cell （ML-MFC） was designed for wastewater treatment. Granular graphite electrodes, which are flexible in size, were adopted in the ML-MFC. Microbes present in anaerobic ac...An upflow mode membrane-less microbial fuel cell （ML-MFC） was designed for wastewater treatment. Granular graphite electrodes, which are flexible in size, were adopted in the ML-MFC. Microbes present in anaerobic activated sludge were used as the biocatalyst and artificial wastewater was tested as substrate. During the electrochemically active microbe enrichment stage, a stable power output of 536 mW.m-3 with reference to the anode volume was generated by the ML-MFC running in batch mode. The voltage output decreased from 203 mV to about 190 mV after the ML-MFC was changed from batch mode to normally continuous mode, indicating that planktonic electrochemically active bacterial strains in the ML-MFC may be carried away along with the effluent. Cyclic voltammograms showed that the attached microbes possessed higher bioelectrochemical activity than the planktonic microbes. Forced aeration to the cathode benefited the electricity generation obviously. Higher feeding rate and longer electrode distance both increased the electricity generation. The coulombic yield was not more than 20% throughout the study, which is lower than that of MFCs with membrane. It is proposed that dissolved oxygen diffused from the cathode to the anode may consume part of the substrate.展开更多
A microbial fuel cell （MFC） is a device that converts chemical energy to electrical energy during substrate oxidation by microorganisms. The characterization and identification of these microbial communities will al...A microbial fuel cell （MFC） is a device that converts chemical energy to electrical energy during substrate oxidation by microorganisms. The characterization and identification of these microbial communities will allow better control of this electricity generation with simultaneous removal of carbon and nitrogen. This study aims to investigate the role of natural bacteria in electricity generation by studying three different sources of wastewater： the raw wastewater （RW）, wastewater from an aeration tank （AEW） and returned activated sludge （RAS） from an activated sludge treatment plant. The result showed that after the MFC treatment, the number of bacterial strains was reduced from twenty strains to eight strains. Microscopic observation further showed that fifteen isolate before the treatment were gram-positive, and five were gram-negative whereas all isolates after the treatment were gram-positive rods or cocci The four strains isolated from the RAS inoculums, β-Comamonas sp., γ-Enterobacter sp., Bacillus cereus sp. and Clostridium sp. produced the highest power density of 67.57 mW/m^2 which made them potential candidates for electrochemically active bacteria in MFCs. However, the level of chemical oxygen demand （COD） removal was 20% and the total kjeldahl nitrogen （TKN） removal was 66.7%. Key words：展开更多
A sequential anode-cathode double-chamber microbial fuel cell （MFC）, in which the effluent of anode chamber was used as a continuous feed for an aerated cathode chamber, was constructed in this experiment to investi...A sequential anode-cathode double-chamber microbial fuel cell （MFC）, in which the effluent of anode chamber was used as a continuous feed for an aerated cathode chamber, was constructed in this experiment to investigate the performance of brewery wastewater treatment in conjugation with electricity generation. Carbon fiber was used as anode and plain carbon felt with biofilm as cathode. When hydraulic retention time （HRT） was 14.7 h, a relatively high chemical oxygen demand （COD） removal efficiency of 91.7%-95.7% was achieved under long-term stable operation. The MFC displayed an open circuit voltage of 0.434 V and a maximum power density of 830 mW/m^3 at an external resistance of 300 0. To estimate the electrochemical performance of the MFC, electrochemical measurements were carried out and showed that polarization resistance of anode was the major limiting factor in the MFC. Since a high COD removal efficiency was achieved, we conclude that the sequential anode-cathode MFC constructed with bio-cathode in this experiment could provide a new approach for brewery wastewater treatment.展开更多
基金The Fundamental Research Funds for the Central Universitiesthe National Natural Science Foundation of China (No.51109038)
文摘A membrane-less constructed wetland microbial fuel cell （CW-MFC） is constructed and operated under continuous flow with a hydraulic retention time （HRT） of 2 d. Fed with glucose, the CW-MFC generates a stable current density of over 2 A/m3 with a resistor of 1 kΩ and has a chemical oxygen demand （COD） removal efficiency of more than 90% after the startup of 2 to 3 d. A series of systems with the electrode spacings of 10, 20, 30 and 40 cm are compared. It is found that the container with the electrode spacing of 20 cm gains the highest voltage of 560 mV, the highest power density of 0. 149 W/m 3, and the highest Coulombic efficiency of 0.313%. It also has the highest COD removal efficiency of 94. 9%. In addition, the dissolved oxygen （DO） concentrations are observed as the lowest level in the middle of all the CW-MFC reactors. The results show that the more COD is removed, the greater power is generated, and the relatively higher Coulombic efficiency will be achieved. The present study indicates that the CW-MFC process can be used as a cost-effective and environmentally friendly wastewater treatment with simultaneous power generation.
基金Supported by the National Natural Science Foundation of China （20306029, 20576137）.
文摘An upflow mode membrane-less microbial fuel cell （ML-MFC） was designed for wastewater treatment. Granular graphite electrodes, which are flexible in size, were adopted in the ML-MFC. Microbes present in anaerobic activated sludge were used as the biocatalyst and artificial wastewater was tested as substrate. During the electrochemically active microbe enrichment stage, a stable power output of 536 mW.m-3 with reference to the anode volume was generated by the ML-MFC running in batch mode. The voltage output decreased from 203 mV to about 190 mV after the ML-MFC was changed from batch mode to normally continuous mode, indicating that planktonic electrochemically active bacterial strains in the ML-MFC may be carried away along with the effluent. Cyclic voltammograms showed that the attached microbes possessed higher bioelectrochemical activity than the planktonic microbes. Forced aeration to the cathode benefited the electricity generation obviously. Higher feeding rate and longer electrode distance both increased the electricity generation. The coulombic yield was not more than 20% throughout the study, which is lower than that of MFCs with membrane. It is proposed that dissolved oxygen diffused from the cathode to the anode may consume part of the substrate.
文摘A microbial fuel cell （MFC） is a device that converts chemical energy to electrical energy during substrate oxidation by microorganisms. The characterization and identification of these microbial communities will allow better control of this electricity generation with simultaneous removal of carbon and nitrogen. This study aims to investigate the role of natural bacteria in electricity generation by studying three different sources of wastewater： the raw wastewater （RW）, wastewater from an aeration tank （AEW） and returned activated sludge （RAS） from an activated sludge treatment plant. The result showed that after the MFC treatment, the number of bacterial strains was reduced from twenty strains to eight strains. Microscopic observation further showed that fifteen isolate before the treatment were gram-positive, and five were gram-negative whereas all isolates after the treatment were gram-positive rods or cocci The four strains isolated from the RAS inoculums, β-Comamonas sp., γ-Enterobacter sp., Bacillus cereus sp. and Clostridium sp. produced the highest power density of 67.57 mW/m^2 which made them potential candidates for electrochemically active bacteria in MFCs. However, the level of chemical oxygen demand （COD） removal was 20% and the total kjeldahl nitrogen （TKN） removal was 66.7%. Key words：
基金Project supported by the Heilongjiang Science and Technology Key Projects (No. GC07A305)the Fund of Harbin Engineering University (No. HEUFT08008)the Daqing Science and Technology Key Projects (No. SGG2008-029), Heilongjiang, China
文摘A sequential anode-cathode double-chamber microbial fuel cell （MFC）, in which the effluent of anode chamber was used as a continuous feed for an aerated cathode chamber, was constructed in this experiment to investigate the performance of brewery wastewater treatment in conjugation with electricity generation. Carbon fiber was used as anode and plain carbon felt with biofilm as cathode. When hydraulic retention time （HRT） was 14.7 h, a relatively high chemical oxygen demand （COD） removal efficiency of 91.7%-95.7% was achieved under long-term stable operation. The MFC displayed an open circuit voltage of 0.434 V and a maximum power density of 830 mW/m^3 at an external resistance of 300 0. To estimate the electrochemical performance of the MFC, electrochemical measurements were carried out and showed that polarization resistance of anode was the major limiting factor in the MFC. Since a high COD removal efficiency was achieved, we conclude that the sequential anode-cathode MFC constructed with bio-cathode in this experiment could provide a new approach for brewery wastewater treatment.
