期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
行业标准《汽车燃气加热器》编制原则与主要技术特点
1
作者 申福林 檀荣科 刘冬 《交通运输工程学报》 EI CSCD 北大核心 2008年第3期24-27,共4页
为推进车用燃气加热器产品开发,规范产品性能及质量监管,以燃气特性、燃烧理论、噪声测试原理、现代控制技术等理论为基础,研究了国内外同类标准的排放、噪声、安全等指标及测试方法。研究发现,将过量空气系数为1时废气中CO、NOx、HC的... 为推进车用燃气加热器产品开发,规范产品性能及质量监管,以燃气特性、燃烧理论、噪声测试原理、现代控制技术等理论为基础,研究了国内外同类标准的排放、噪声、安全等指标及测试方法。研究发现,将过量空气系数为1时废气中CO、NOx、HC的体积含量作为排放指标,能够全面控制车用燃气加热器排放;采用GB/T3767—1996能够客观准确测试产品工作噪声,利用点火安全时间及熄火安全时间指标能有效控制产品的工作安全性。最后结合样机测试结果及国内外最新标准,确定了中国汽车行业标准《汽车燃气加热器》(QC/T769—2006)中的技术指标及测试方法。实际应用证明,该标准能够在安全性、电气特性、工作稳定性和可靠性等方面综合规范产品质量。 展开更多
关键词 汽车工程 燃气车辆 汽车燃气加热器 中国汽车行业标准 燃烧理论 汽车空调技术
下载PDF
山西省道路运输领域天然气(煤层气)利用现状与发展前景分析 被引量:1
2
作者 赵国瑞 《交通世界》 2019年第16期171-173,共3页
通过分析道路运输领域天然气(煤层气)的利用现状、存在的问题以及未来发展趋势,认为天然气(煤层气)在山西道路运输领域仍具有较大利用空间,并提出了推动道路运输领域天然气(煤层气)利用的相关建议,以为相关部门提供决策参考。
关键词 道路运输 车用燃料 燃气车辆 产业政策
下载PDF
浅析CNG加气子站运行问题及解决措施
3
作者 尹东亮 《中国设备工程》 2019年第18期100-101,共2页
本文就CNG加气子站设备在日常运行中可能出现的问题以及造成该问题的原因进行了分析,并提出有效的处置措施,降低或者消除这些安全隐患,确保加气子站的正常运行,创造稳定安全的工作环境,提升行业安全管理水平。
关键词 加气站 燃气车辆 加气机 安全
下载PDF
Comparative Analysis of Gas Emissions from a Vehicle Running on Ethanol and Natural Gas Fuel
4
作者 Raphael Araujo de Holanda Gil Colona Laranja Cleiton Rubens Formiga Barbosa Francisco de Assis Oliveira Fontes Cleiton Rubens Formiga Barbosa Junior 《Journal of Mechanics Engineering and Automation》 2014年第7期595-600,共6页
It is known that the transport sector has a fundamental importance in the modem society, as the economic development is directly linked to mobility. Over the years, the transport became linked to different environment... It is known that the transport sector has a fundamental importance in the modem society, as the economic development is directly linked to mobility. Over the years, the transport became linked to different environmental problems, which can be detached greenhouse gases emissions in the atmosphere, where in recent decades can be perceived the intensification and targeting of efforts in research and development of new technologies to reduce the levels of greenhouse gases emissions in the atmosphere. In this context, it can be highlighted the modem systems of electronic engine management, new automotive catalysts and the use of renewable fuels which contribute to reducing the environmental impact. This research had, as its purpose, the analysis of fuels characteristics used for testing, comparative analysis of gas emissions from a motor vehicle running on ethanol or natural gas fuels according to NBR 6601 and conducting tests to estimate the maximum catalytic efficiency. For the implementation of trial, a flex vehicle was installed in a chassis dynamometer equipped with a gas analyzer, in order that before the completion of the urban driving cycle, were determined the content of hydrocarbons corrected, carbon monoxide corrected, carbon dioxide and oxygen present in gas emissions from the engine. The research concluded that: the performance analysis for characterization of fuel showed consistent with ANP specifications; after tests performances, it can be stated that natural gas fuel was the fuel which had the highest content of hydrocarbons and carbon monoxide corrected, while ethanol had the highest amount of carbon dioxide and oxygen residue present in gas emissions; before a comparative analysis, the vehicle catalyst showed the best performance for reducing the content of hydrocarbon corrected present in exhaustion gases when it worked with natural gas fuel and showed maximum efficiency of 100% to reduce the content of carbon monoxide corrected for both fuels. Before this, it can be stated that the vehicle catalyst showed satisfactory performance, achieving good reduction levels of greenhouse gases emissions. 展开更多
关键词 Gas emissions ETHANOL natural gas fuel NBR 6601 catalytic efficiency.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部