Flame is prone to lose its stability in micro-combustors due to the large amount of heat loss from the external walls. On the other hand, heat recirculation through the upstream combustor walls can enhance flame stabi...Flame is prone to lose its stability in micro-combustors due to the large amount of heat loss from the external walls. On the other hand, heat recirculation through the upstream combustor walls can enhance flame stability. These two aspects depend on the structural heat transfer, which is associated with the thickness and thermal conductivity of the combustor walls. In the present study, the effects of wall thickness and material on flame stability were numerically investigated by selecting two thicknesses (δ=0.2 and 0.4 mm) and two materials (quartz and SiC). The results show that when δ=0.2 mm, flame inclination occurs at a certain inlet velocity in both combustors, but it happens later in SiC combustor. For δ=0.4 mm, flame inclination still occurs in quartz combustor from a larger inlet velocity compared to the case of δ=0.2 mm. However, flame inclination in SiC combustor with δ=0.4 mm does not happen and it has a much larger blowout limit. Analysis reveals that a thicker wall can enhance heat recirculation and reduce heat loss simultaneously. Moreover, SiC combustor has larger heat recirculation ratio and smaller heat loss ratio. In summary, the micro-combustor with thicker and more conductive walls can harvest large flame stability limit.展开更多
The purpose of this study is to understand the factor that influence the heating efficiency of the outward and inward multi-hole gas burner. The flame-hole angle and the distance from flame hole to heating object are ...The purpose of this study is to understand the factor that influence the heating efficiency of the outward and inward multi-hole gas burner. The flame-hole angle and the distance from flame hole to heating object are chosen as the experimental parameters. The measurement of the flame temperature distribution is carried out on each experimental condition. The observation of combustion flame, by the Schlieren method, is done from the purpose to understand the combustion phenomenon on the heating efficiency. LPG (Liquefied petroleum gas) is used for the test fuel gas. The compositions of LPG are propane 97.5vol%, butane 0.2vol% and methane + ethylene 2.3vol%. The optimum ranges of the flame-hole angle and the distance from flame hole to heating object are clarified. The experimental correlation equations for the outward and inward multi-flame-hole gas burner are proposed.展开更多
基金Project(51576084) supported by the National Natural Science Foundation of China
文摘Flame is prone to lose its stability in micro-combustors due to the large amount of heat loss from the external walls. On the other hand, heat recirculation through the upstream combustor walls can enhance flame stability. These two aspects depend on the structural heat transfer, which is associated with the thickness and thermal conductivity of the combustor walls. In the present study, the effects of wall thickness and material on flame stability were numerically investigated by selecting two thicknesses (δ=0.2 and 0.4 mm) and two materials (quartz and SiC). The results show that when δ=0.2 mm, flame inclination occurs at a certain inlet velocity in both combustors, but it happens later in SiC combustor. For δ=0.4 mm, flame inclination still occurs in quartz combustor from a larger inlet velocity compared to the case of δ=0.2 mm. However, flame inclination in SiC combustor with δ=0.4 mm does not happen and it has a much larger blowout limit. Analysis reveals that a thicker wall can enhance heat recirculation and reduce heat loss simultaneously. Moreover, SiC combustor has larger heat recirculation ratio and smaller heat loss ratio. In summary, the micro-combustor with thicker and more conductive walls can harvest large flame stability limit.
文摘The purpose of this study is to understand the factor that influence the heating efficiency of the outward and inward multi-hole gas burner. The flame-hole angle and the distance from flame hole to heating object are chosen as the experimental parameters. The measurement of the flame temperature distribution is carried out on each experimental condition. The observation of combustion flame, by the Schlieren method, is done from the purpose to understand the combustion phenomenon on the heating efficiency. LPG (Liquefied petroleum gas) is used for the test fuel gas. The compositions of LPG are propane 97.5vol%, butane 0.2vol% and methane + ethylene 2.3vol%. The optimum ranges of the flame-hole angle and the distance from flame hole to heating object are clarified. The experimental correlation equations for the outward and inward multi-flame-hole gas burner are proposed.