The laminar flame propagation of 1-heptene/air mixtures covering equivalence ratios from 0.7 to 1.5 is investigated in a constant-volume cylindrical combustion vessel at 373K and elevated pressures (1, 2, 5, and 10 at...The laminar flame propagation of 1-heptene/air mixtures covering equivalence ratios from 0.7 to 1.5 is investigated in a constant-volume cylindrical combustion vessel at 373K and elevated pressures (1, 2, 5, and 10 atm). Laminar flame speed and Markstein length are derived from the recorded schlieren images. A kinetic model of 1-heptene combustion is developed based on our previous kinetic model of 1-hexene. The model is validated against the laminar flame speed data measured in this work and the ignition delay time data in literature. Modeling analyses, such as sensitivity analysis and rate of production analysis, are performed to help understand the high temperature chemistry of 1-heptene under various pressures and its influence on the laminar flame propagation. Furthermore, the laminar flame propagation of 1-heptene/air mixtures is compared with that of n-heptane/air mixtures reported in our previous work. The laminar flame speed values of 1-heptene/air mixtures are observed to be faster than those of n-heptane/air mixtures under most conditions due to the enhanced exothermicity and reactivity.展开更多
A novel suspension-floating-circulating fluidized combustion technology is proposed for burning coal slurry fuel in traditional circulating ftuidized bed boilers （CFBB）. This technology can solve some existing probl...A novel suspension-floating-circulating fluidized combustion technology is proposed for burning coal slurry fuel in traditional circulating ftuidized bed boilers （CFBB）. This technology can solve some existing problems in large- capacity CFBB burning coal slurry. The principles of the suspension-floating-circulating fluidized combustion technology were introduced in detail in this paper. A 130 t/h CFBB was retrofitted based on the technology, and the retrofitted system mainly includes a long-distance transport sub-system, a bed-material conveying sub-system with a wind-seal device invented by the authors, a superheater thermoregulation device using a novel temperature regulator, a return loop flu- idization facility, and a pneumatic ash conveying sub-system with sealed pump. The achieved performance of the retro- fitted CFBB shows that the thermal efficiency is 89.83 %, the combustion efficiency is 96.24 %, and the blending proportion of slurry is 94 %.展开更多
In partially premixed combustion of gas turbine, the combustion temperature should be lowed in order to reduce NOx. One solution is lean premixed combustion. However, the problem is that large excess air ratio may mak...In partially premixed combustion of gas turbine, the combustion temperature should be lowed in order to reduce NOx. One solution is lean premixed combustion. However, the problem is that large excess air ratio may make the combustion unstable. A novel combustor with circumferential reverse flow of fuel gas is proposed for settling this problem. A 10 kw furnace is established to test performance of this combustor. Three factors such as primary air ratio, position of secondary air, total excess air ratio are studied. The emission characteristics and axial flame temperature distribution are studied. Basing on experimental results, the axial flame temperature and NOr emission increase with primary air ratio and axial length of second stream, and decrease with total excess air ratio. When the total excess air ratio is larger than 1.05, the combustor presents a lower temperature field and much lower NOx emission （less than 10 ppm）.展开更多
基金supported by the National Key R&D Program of China (No.2017YFA0402800)National Natural Science Foundation of China (No.51622605 and No.91541201)Shanghai Science and Technology Committee (No.17XD1402000)
文摘The laminar flame propagation of 1-heptene/air mixtures covering equivalence ratios from 0.7 to 1.5 is investigated in a constant-volume cylindrical combustion vessel at 373K and elevated pressures (1, 2, 5, and 10 atm). Laminar flame speed and Markstein length are derived from the recorded schlieren images. A kinetic model of 1-heptene combustion is developed based on our previous kinetic model of 1-hexene. The model is validated against the laminar flame speed data measured in this work and the ignition delay time data in literature. Modeling analyses, such as sensitivity analysis and rate of production analysis, are performed to help understand the high temperature chemistry of 1-heptene under various pressures and its influence on the laminar flame propagation. Furthermore, the laminar flame propagation of 1-heptene/air mixtures is compared with that of n-heptane/air mixtures reported in our previous work. The laminar flame speed values of 1-heptene/air mixtures are observed to be faster than those of n-heptane/air mixtures under most conditions due to the enhanced exothermicity and reactivity.
文摘A novel suspension-floating-circulating fluidized combustion technology is proposed for burning coal slurry fuel in traditional circulating ftuidized bed boilers （CFBB）. This technology can solve some existing problems in large- capacity CFBB burning coal slurry. The principles of the suspension-floating-circulating fluidized combustion technology were introduced in detail in this paper. A 130 t/h CFBB was retrofitted based on the technology, and the retrofitted system mainly includes a long-distance transport sub-system, a bed-material conveying sub-system with a wind-seal device invented by the authors, a superheater thermoregulation device using a novel temperature regulator, a return loop flu- idization facility, and a pneumatic ash conveying sub-system with sealed pump. The achieved performance of the retro- fitted CFBB shows that the thermal efficiency is 89.83 %, the combustion efficiency is 96.24 %, and the blending proportion of slurry is 94 %.
文摘In partially premixed combustion of gas turbine, the combustion temperature should be lowed in order to reduce NOx. One solution is lean premixed combustion. However, the problem is that large excess air ratio may make the combustion unstable. A novel combustor with circumferential reverse flow of fuel gas is proposed for settling this problem. A 10 kw furnace is established to test performance of this combustor. Three factors such as primary air ratio, position of secondary air, total excess air ratio are studied. The emission characteristics and axial flame temperature distribution are studied. Basing on experimental results, the axial flame temperature and NOr emission increase with primary air ratio and axial length of second stream, and decrease with total excess air ratio. When the total excess air ratio is larger than 1.05, the combustor presents a lower temperature field and much lower NOx emission （less than 10 ppm）.
