This paper presents the experimental results of composition changes of heavy fuel oil by stmulating weathering in static seawater under natural environmental conditions. The results indicate： n-C10 to n-C15 were lost...This paper presents the experimental results of composition changes of heavy fuel oil by stmulating weathering in static seawater under natural environmental conditions. The results indicate： n-C10 to n-C15 were lost gradually in 24 weeks and the relative abundance of alkanes with long chains （〉n-C19） increased markedly. The aromatic compounds with less than two tings （except C4N） were completely lost in 24 weeks and CnP and CnD became the main aromatics in the heavy fuel oil after 24 weeks. The ratios of n- C1/Pristane （Pr） and n-C18 Phytane （Ph） were suitable for identifying lightly weathered （3 weeks） heavy fuel oil. The ratios of n-ClT/n-C18 and Pr/Ph were suitable for identifying moderately weathered heavy fuel oil （12 weeks）; the ratios of C2D/C2P and C3D/C3P did not change significantly in 24 weeks and were more suitable for identifying moderately weathered heavy fuel oil （24 weeks）.展开更多
In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methan...In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methanol, 88% gasoline-12% ethanol and 88% gasoline-6% methanol-6% ethanol）. Additional tests are carried out with the basic gasoline fuel for comparison analysis and performance assessment. Engine performance is investigated under a variety of engine operating conditions. The results are presented in the domain of engine speed. In particular, the brake power of the engine is shown to be slightly increased. The brake thermal efficiency showed an increase compared with the basic gasoline engine. Similarly, it is shown that brake specific fuel consumption is enhanced compared with basic gasoline engine. The exhaust gas temperature showed a decrease compared with gasoline fuel which is preferable to reduce emissions. The alcohol additives are strongly recommended to enhance performance, increasing the mileage and reducing the emissions.展开更多
Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger...Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger ecosystem. In Malaysia, more than 50-tone of WCO from various sources was produced every day. This study evaluates combustion performance and exhaust emission characteristics of several WCOs with different sources. Modification on fuel properties has been done to improve the combustion and exhaust emission of using WCO as diesel fuel. Regular diesel fuel also has been used for comparison in the test. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads at constant speed.展开更多
This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided i...This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided into several functional blocks： cooling, lubrication, air, injection, combustion and emissions. The sub-models and dynamic characteristics of individual blocks are established according to engine working principles equations and experimental data collected from a marine diesel engine test bench for SIMB Company under the reference 6M26SRP1. The overall engine system dynamics is expressed as a set of simultaneous algebraic and differential equations using sub-blocks and S-Functions of Matlab/Simulink. The simulation of this model, implemented on Matlab/Simulink has been validated and can be used to obtain engine performance, pressure, temperature, efficiency, heat release, crank angle, fuel rate, emissions at different sub-blocks. The simulator will be used, in future work, to study the engine performance in faulty conditions, and can be used to assist marine engineers in fault diagnosis and estimation （FDI） as well as designers to predict the behavior of the cooling system, lubrication system, injection system, combustion, emissions, in order to optimize the dimensions of different components. This program is a platform for fault simulator, to investigate the impact on sub-blocks engine＇s output of changing values for faults parameters such as： faulty fuel injector, leaky cylinder, worn fuel pump, broken piston rings, a dirty turbocharger, dirty air filter, dirty air cooler, air leakage, water leakage, oil leakage and contamination, fouling of heat exchanger, pumps wear, failure of injectors （and many others）.展开更多
Recently ＂the hydrocarcking technology aimed at prodigiously boosting jet fuel yield along with improvement of tail-oil quality＂developed by the SINOPEC Research Institute of Petroleum Processing（RIPP） has been su...Recently ＂the hydrocarcking technology aimed at prodigiously boosting jet fuel yield along with improvement of tail-oil quality＂developed by the SINOPEC Research Institute of Petroleum Processing（RIPP） has been successfully applied in commercial scale on the 2.0 Mt/a hydrocracking unit at the SINOPEC Yanshan Branch Company, resulting in implementation of triple functions, viz.： boosting the jet fuel yield, reducing the diesel fuel output and improving the tail-oil quality. This technique has brought about obvious economic and environmental benefts, which can provide a mate-rial basis to bridge the demand gap in jet fuel supply at the new Beijing Airport and will serve as a good ex-ample of SINOPEC’s efforts in the area of transforma-tion of production mode, structure adjustment, product quality upgrading and enhancement of economic ben-efts at the refning enterprise.展开更多
This work deals with the examination of farm tractor with diesel engine from the viewpoint of power and gas emissions, using as fuel diesel-ethanol mixtures. A series of laboratory instruments was used for the realiza...This work deals with the examination of farm tractor with diesel engine from the viewpoint of power and gas emissions, using as fuel diesel-ethanol mixtures. A series of laboratory instruments was used for the realization of the experiments. The tractor engine is functioning under full load conditions. The experimental results have shown small reduction of power engine with simultaneously remarkable reduction of CO and HC emissions.展开更多
SVO （straight vegetable oil） method means the direct use of vegetable oil as car fuel through installation of a heater unit in the car to decrease vegetable oil viscosity. In this study, the authors carried out perf...SVO （straight vegetable oil） method means the direct use of vegetable oil as car fuel through installation of a heater unit in the car to decrease vegetable oil viscosity. In this study, the authors carried out performance tests on the direct use of waste cooking oil using a car with a heater unit, Moreover, the authors carried out long run driving on road tests in five years using a public car of Minami-Aizu Town in Fukushima Prefecture and analyzed the case of troubles and clarified the availability and problems of SVO vehicles. As a result, the car with a heater unit shows similar performance in both cases using vegetable oil or diesel fuel as fuel. The tested SVO vehicle of Minami-Aizu Town could be driven 38,127 km mainly by waste vegetable oil with a total driving distance of 52,293 km in long run driving tests in five years, and decreased about 3,813.5 liters of light oil which corresponds to 9.99 t of CO2.展开更多
Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of ...Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.展开更多
The staged injector has exhibited great potential to achieve low emissions and is becoming the preferable choice of many civil airplanes. Moreover, it is promising to employ this injector design in military engine, wh...The staged injector has exhibited great potential to achieve low emissions and is becoming the preferable choice of many civil airplanes. Moreover, it is promising to employ this injector design in military engine, which requires most of the combustion air enters the combustor through injector to reduce smoke emission. However, lean staged injector is prone to combustion instability and extinction in low load operation, so techniques for broadening its stable operation ranges are crucial for its application in real engine.In this work, the LBO performance of a staged injector is assessed and analyzed on a single sector test section.The experiment was done in atmospheric environment with optical access. Kerosene-PLIF technique was used to visualize the spray distribution and common camera was used to record the flame patterns. Emphasis is put on the influence of pilot burner on LBO performance. The fuel to air ratios at LBO of six injectors with different pilot swirler vane angle were evaluated and the obtained LBO data was converted into data at idle condition. Results show that the increase of pilot swirler vane angle could promote the air assisted atomization, which in turn improves the LBO performance slightly. Flame patterns typical in the process of LBO are analyzed and attempts are made to find out the main factors which govern the extinction process with the assistance of spray distribution and numerical flow field results. It can be learned that the flame patterns are mainly influenced by structure of the flow field just behind the pilot burner when the fuel mass flow rate is high; with the reduction of fuel, atomization quality become more and more important and is the main contributing factor of LBO. In the end of the paper,conclusions are drawn and suggestions are made for the optimization of the present staged injector.展开更多
With life cycle assessment(LCA) methodology,a life cycle model of coal-based vehicle fuels(CBVFs) including coal-based dimethyl ether(CBDME) and coal-based diesel(CBD) is established.Their primary energy consumption(P...With life cycle assessment(LCA) methodology,a life cycle model of coal-based vehicle fuels(CBVFs) including coal-based dimethyl ether(CBDME) and coal-based diesel(CBD) is established.Their primary energy consumption(PEC) and global warming potential(GWP) from well to wheel including feedstock extraction,fuel production,fuel consumption in vehicle and energy transportation are calculated and compared.Results show that the life cycle PEC and GWP of CBD pathway are 1.17 and 1.34 times as CBDME pathway.Based on the above results,CBDME will become a choice with great potential to replace conventional petroleum-based diesel (CPBD) in China.展开更多
文摘This paper presents the experimental results of composition changes of heavy fuel oil by stmulating weathering in static seawater under natural environmental conditions. The results indicate： n-C10 to n-C15 were lost gradually in 24 weeks and the relative abundance of alkanes with long chains （〉n-C19） increased markedly. The aromatic compounds with less than two tings （except C4N） were completely lost in 24 weeks and CnP and CnD became the main aromatics in the heavy fuel oil after 24 weeks. The ratios of n- C1/Pristane （Pr） and n-C18 Phytane （Ph） were suitable for identifying lightly weathered （3 weeks） heavy fuel oil. The ratios of n-ClT/n-C18 and Pr/Ph were suitable for identifying moderately weathered heavy fuel oil （12 weeks）; the ratios of C2D/C2P and C3D/C3P did not change significantly in 24 weeks and were more suitable for identifying moderately weathered heavy fuel oil （24 weeks）.
文摘In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methanol, 88% gasoline-12% ethanol and 88% gasoline-6% methanol-6% ethanol）. Additional tests are carried out with the basic gasoline fuel for comparison analysis and performance assessment. Engine performance is investigated under a variety of engine operating conditions. The results are presented in the domain of engine speed. In particular, the brake power of the engine is shown to be slightly increased. The brake thermal efficiency showed an increase compared with the basic gasoline engine. Similarly, it is shown that brake specific fuel consumption is enhanced compared with basic gasoline engine. The exhaust gas temperature showed a decrease compared with gasoline fuel which is preferable to reduce emissions. The alcohol additives are strongly recommended to enhance performance, increasing the mileage and reducing the emissions.
文摘Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger ecosystem. In Malaysia, more than 50-tone of WCO from various sources was produced every day. This study evaluates combustion performance and exhaust emission characteristics of several WCOs with different sources. Modification on fuel properties has been done to improve the combustion and exhaust emission of using WCO as diesel fuel. Regular diesel fuel also has been used for comparison in the test. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads at constant speed.
文摘This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided into several functional blocks： cooling, lubrication, air, injection, combustion and emissions. The sub-models and dynamic characteristics of individual blocks are established according to engine working principles equations and experimental data collected from a marine diesel engine test bench for SIMB Company under the reference 6M26SRP1. The overall engine system dynamics is expressed as a set of simultaneous algebraic and differential equations using sub-blocks and S-Functions of Matlab/Simulink. The simulation of this model, implemented on Matlab/Simulink has been validated and can be used to obtain engine performance, pressure, temperature, efficiency, heat release, crank angle, fuel rate, emissions at different sub-blocks. The simulator will be used, in future work, to study the engine performance in faulty conditions, and can be used to assist marine engineers in fault diagnosis and estimation （FDI） as well as designers to predict the behavior of the cooling system, lubrication system, injection system, combustion, emissions, in order to optimize the dimensions of different components. This program is a platform for fault simulator, to investigate the impact on sub-blocks engine＇s output of changing values for faults parameters such as： faulty fuel injector, leaky cylinder, worn fuel pump, broken piston rings, a dirty turbocharger, dirty air filter, dirty air cooler, air leakage, water leakage, oil leakage and contamination, fouling of heat exchanger, pumps wear, failure of injectors （and many others）.
文摘Recently ＂the hydrocarcking technology aimed at prodigiously boosting jet fuel yield along with improvement of tail-oil quality＂developed by the SINOPEC Research Institute of Petroleum Processing（RIPP） has been successfully applied in commercial scale on the 2.0 Mt/a hydrocracking unit at the SINOPEC Yanshan Branch Company, resulting in implementation of triple functions, viz.： boosting the jet fuel yield, reducing the diesel fuel output and improving the tail-oil quality. This technique has brought about obvious economic and environmental benefts, which can provide a mate-rial basis to bridge the demand gap in jet fuel supply at the new Beijing Airport and will serve as a good ex-ample of SINOPEC’s efforts in the area of transforma-tion of production mode, structure adjustment, product quality upgrading and enhancement of economic ben-efts at the refning enterprise.
文摘This work deals with the examination of farm tractor with diesel engine from the viewpoint of power and gas emissions, using as fuel diesel-ethanol mixtures. A series of laboratory instruments was used for the realization of the experiments. The tractor engine is functioning under full load conditions. The experimental results have shown small reduction of power engine with simultaneously remarkable reduction of CO and HC emissions.
文摘SVO （straight vegetable oil） method means the direct use of vegetable oil as car fuel through installation of a heater unit in the car to decrease vegetable oil viscosity. In this study, the authors carried out performance tests on the direct use of waste cooking oil using a car with a heater unit, Moreover, the authors carried out long run driving on road tests in five years using a public car of Minami-Aizu Town in Fukushima Prefecture and analyzed the case of troubles and clarified the availability and problems of SVO vehicles. As a result, the car with a heater unit shows similar performance in both cases using vegetable oil or diesel fuel as fuel. The tested SVO vehicle of Minami-Aizu Town could be driven 38,127 km mainly by waste vegetable oil with a total driving distance of 52,293 km in long run driving tests in five years, and decreased about 3,813.5 liters of light oil which corresponds to 9.99 t of CO2.
文摘Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.
基金supported by National Natural Science Foundation of China with project No.51306182
文摘The staged injector has exhibited great potential to achieve low emissions and is becoming the preferable choice of many civil airplanes. Moreover, it is promising to employ this injector design in military engine, which requires most of the combustion air enters the combustor through injector to reduce smoke emission. However, lean staged injector is prone to combustion instability and extinction in low load operation, so techniques for broadening its stable operation ranges are crucial for its application in real engine.In this work, the LBO performance of a staged injector is assessed and analyzed on a single sector test section.The experiment was done in atmospheric environment with optical access. Kerosene-PLIF technique was used to visualize the spray distribution and common camera was used to record the flame patterns. Emphasis is put on the influence of pilot burner on LBO performance. The fuel to air ratios at LBO of six injectors with different pilot swirler vane angle were evaluated and the obtained LBO data was converted into data at idle condition. Results show that the increase of pilot swirler vane angle could promote the air assisted atomization, which in turn improves the LBO performance slightly. Flame patterns typical in the process of LBO are analyzed and attempts are made to find out the main factors which govern the extinction process with the assistance of spray distribution and numerical flow field results. It can be learned that the flame patterns are mainly influenced by structure of the flow field just behind the pilot burner when the fuel mass flow rate is high; with the reduction of fuel, atomization quality become more and more important and is the main contributing factor of LBO. In the end of the paper,conclusions are drawn and suggestions are made for the optimization of the present staged injector.
文摘With life cycle assessment(LCA) methodology,a life cycle model of coal-based vehicle fuels(CBVFs) including coal-based dimethyl ether(CBDME) and coal-based diesel(CBD) is established.Their primary energy consumption(PEC) and global warming potential(GWP) from well to wheel including feedstock extraction,fuel production,fuel consumption in vehicle and energy transportation are calculated and compared.Results show that the life cycle PEC and GWP of CBD pathway are 1.17 and 1.34 times as CBDME pathway.Based on the above results,CBDME will become a choice with great potential to replace conventional petroleum-based diesel (CPBD) in China.
