我国爆粒高粱资源的发现与初步鉴定

在广西西南部山区的考察中，发现并收集了２５份爆粒高粱资源。经鉴定分析，爆粒高粱籽粒的爆粒率达９４．１４％，膨胀系数达１０．０１，有较好的利用价值。其中上甫高粱和龙合白高粱的爆粒率在９７％以上，膨胀系数１１．９０以上，是我国现有爆粒高粱中的优良种质。

一个玉米爆粒突变体的鉴别与遗传分析

在玉米(Zea mays L.)自交系SCY的后代中发现了一个天然的玉米突变材料pk1,表现为籽粒顶端表皮大幅度开裂,致使胚乳外露,呈爆破状。该爆粒突变体果穗共有籽粒328粒,其中爆裂籽粒286粒,未爆裂籽粒42粒。该突变体不同爆裂籽粒与玉米自交系B73杂交后产生的后代群体中,出现爆裂籽粒和正常未爆裂籽粒2种类型,正反交差异明显。自交后代也出现爆裂籽粒和未爆裂籽粒2种类型。初步判断该爆粒性状是由显性双基因或多基因控制的果皮遗传。

爆裂玉米“吉爆902”选育简报

简要介绍了爆裂玉米新品种“吉爆９０２”的选育经过、试验结果、主要特征特性及栽培技术要点，为正确利用该品种提供科学依据。

浅谈环管法聚丙烯生产静电引起粒（粉）料爆燃事故预防措施

对环管法聚丙烯生产工艺及聚丙烯特性进行简要介绍；对生产过程中出现的爆燃现象的原因进行了分析，并提出了预防爆燃的多项措施。

稻谷爆腰产生的原因及对策

从稻谷的田间管理到收割、干燥、储藏、加工等不同的环节 ,分析稻谷爆腰粒产生的原因 ,对精米加工整米率和食味的影响及解决的对策 ,以提高人们对爆腰的认识 ,并通过控制爆腰 ,满足人们对精米质量的要求 。

Support vector machines approach to mean particle size of rock fragmentation due to bench blasting prediction

Aiming at the problems of the traditional method of assessing distribution of particle size in bench blasting, a support vector machines （SVMs） regression methodology was used to predict the mean particle size （X50） resulting from rock blast fragmentation in various mines based on the statistical learning theory. The data base consisted of blast design parameters, explosive parameters, modulus of elasticity and in-situ block size. The seven input independent variables used for the SVMs model for the prediction of X50 of rock blast fragmentation were the ratio of bench height to drilled burden （H/B）, ratio of spacing to burden （S/B）, ratio of burden to hole diameter （B/D）, ratio of stemming to burden （T/B）, powder factor （Pf）, modulus of elasticity （E） and in-situ block size （XB）. After using the 90 sets of the measured data in various mines and rock formations in the world for training and testing, the model was applied to 12 another blast data for validation of the trained support vector regression （SVR） model. The prediction results of SVR were compared with those of artificial neural network （ANN）, multivariate regression analysis （MVRA） models, conventional Kuznetsov method and the measured X50 values. The proposed method shows promising results and the prediction accuracy of SVMs model is acceptable.

Effect of particle size of coal dust on explosion pressure

The effect of the particle size of coal dust on explosion pressure and the rising rate of explosion pressure is studied. Three coal dusts from Lingan Coal Mine in Canada and Datong Coal Mine in China are selected to test. The influence of particle size on the maximum explosion pressure P max and maximum pressure rising rate (d p /d t ) max of each coal dust was tested experimentally. The results indicate that with the decrease of particle size of coal dusts, explosion pressure increases on condition of the same concentration. If the concentration of coal dust is different, the maximum explosion pressure appears at the concentration of 500 g/m^3. The smaller the particle size of coal dusts, the larger the rising rate of explosion pressure of coal dust. When the concentration of coal dust is 500 g/m^3, the rising rate of explosion pressure of each coal dust is the maximum.

Evolution and meteorological causes of fine particulate explosive growth events in Beijing, China, from 2013 to 2017

Based on online observations of fine particulate matter(PM2.5) for five consecutive years from January 2013 to December 2017 in Beijing, combined with simultaneous measurement of gaseous precursors and meteorological parameters, the evolution and meteorological causes of fineparticle explosive growth(FPEG) events were analyzed. During the 5-year observation period,132 FPEG events were observed and these events were further divided into three types(3-, 6-, and 9-h events) according to their evolution duration. The majority of FPEG events were observed in winter under the conditions of higher gas precursor concentrations and unfavorable meteorological conditions. The average concentration of PM2.5 during winter FPEG events changed little from 2013 to 2016, whereas it decreased significantly in 2017, in accordance with the similar variation of gaseous species(SO2, NO2, and CO). In addition, the higher wind speeds and lowest relative humidity observed in 2017 were also conducive to the decrease in PM2.5. The evolutions of FPEG events and normal haze episodes were analyzed, revealing that the rate of increase in NO2 was much greater than that of SO2, suggesting more of a contribution from mobile sources than stationary sources. The polar Plot results suggest that the transportation from the southeast area of Beijing plays a major role in the formation of 3-h events, whereas local emissions is the main contributory factor for 9-h events and normal haze episodes. However, further quantitative analysis regarding the contributions of these factors is still needed.

大豆烘干问题的探索与实践

大豆在高温季节，超过常年储藏安全临界水分，则易变质失去使用价值。为解决降水问题，许多学者研究出很多办法，但因掌握不住火候，又容易出现爆腰粒，或蛋白质变性，降等降价出售，造成经济损失。本文经过长期对大豆烘干机理问题的探索取得突破性进展，揭示了它的奥秘，在实践中采取“三段烘干法”收到良好效果。

Impact of Inert Metal Particles Flow on Aluminium Plate

Inert metal explosive,a new kind of explosive,is a mixture of high explosive and inert metal particle.When this kind of explosive is detonated,an inert metal particle flow will be formed by the ex-plosive product driving.To determine the characteristics of the movement of the metal particle flow,a series of aluminium plates were designed to be the targets on which the metal particle flow impacted.The test result was presented and a numerical model was set up to analyze the impact of the high speed inert metal particles on aluminium plate.Based on the numerical analysis,the relationship between the characteristic of the mark on the target plate and the initial condition of the inert metal particles was pro-posed.From the analysis of the impact on target plates,more information about the movement of the metal particles could be reconstructed.

Numerical Simulation of Shaped Charge Jet Using Multi-Phase SPH Method

Since the jets and detonation gaseous products are separated by sharp interfaces, the traditional smoothed particle hydrodynamics (SPH) method is difficult to avoid the computational instability at interfaces. The multi-phase SPH (MSPH) method was applied to improving the stabil-ity, which smoothes the particle density and makes pressure continuous at interfaces. Numericalexamples of jet forming process were used to test capability of the MSPH method. The results show that the method remains algorithm stability for large density gradient between the jets and gaseous products and has potential application to both the explosion and the jet problems. The effect of initiation ways of the shaped charge was discussed as well.

Mechanical alloying of platinum with 5% ZrO_2 nanoparticles for glass making tools

Synthesis and characterization of mechanically alloyed Pt-5%ZrO2(volume fraction) for structural components in the glass industry were described. Zirconia(ZrO2) nanoparticles(<100 nm) were produced by the electrical explosion of zirconium(Zr) wires, and blended with platinum(Pt) powders(<44 ?m) for 2-72 h in ambient atmosphere. The Pt particle size followed the typical decreasing trend of the normal ball milling process up to 48 h, but particle agglomeration was observed at 72 h. The grain size evolution was similar to that of the particle size, dropping down to around 50 nm at 48 h. The root mean square strain of the Pt crystallites showed the opposite behavior, maximizing at 48 h with a subsequent relaxation process. For the 48 h ball milled powders, spark plasma sintering was carried out to form a bulk disk. The measured mass loss of the sintered bulk sample shows a decent thermal stability despite its relatively low density.

Detonation initiated disintegration of coal particle due to the maxi- mum strain energy theory

Fragmentation behaviour of coal particles subjected to detonation wave is being studied. Detonation wave is initiated by a plasma cartridge at one end of a detonation tube. Coal particles are subjected to a shock whose temperature depends on the Mach number of the detonation wave. Temperature shock is found to generate thermal stresses which may fragment the coal particles. A non-dimensional mathematical model for the heat transfer process in the coal particle is proposed. Thermal stresses are calculated at various times and radii while maximum strain energy theory is used to understand the failure behavior viz., the time, temperature and location of fracture. A physical model for coal particle fragmentation when subjected to detonation wave is also proposed. The study suggests that detonation combustion of coal is qualitatively different from conventional method.

An Experimental Study on the Drag Property of High-Temperature Particles Falling into Cold Liquid Pool

This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.

Failure behavior of horseshoe-shaped tunnel in hard rock under high stress:Phenomenon and mechanisms

A particle flow code(PFC) was first applied to examining the mechanical response of a horseshoe-shaped opening in prismatic rock models under biaxial compression. Next, an improved complex variable method was proposed to derive the stress distribution around the opening. Lastly, a case study of tunnel failure caused by rock burst in Jinping Ⅱ Hydropower Station was further analyzed and discussed. The results manifest that a total of four types of cracks occur around the opening under low lateral confining stress, namely, the primary-tensile cracks on the roof-floor, sidewall cracks on the sidewalls, secondary-tensile cracks on the corners and shear cracks along the diagonals. As the confining stress increases, the tensile cracks gradually disappear whilst the spalling failure becomes severe. Overall, the failure phenomenon of the modelled tunnel agrees well with that of the practical headrace tunnel, and the crack initiation mechanisms can be clearly clarified by the analytical stress distribution.

Dynamic analysis of granite rockburst based on the PIV technique

This paper describes the deep rockburst simulation system to reproduce the granite instantaneous rockburst process.Based on the PIV(Particle Image Velocimetry)technique,quantitative analysis of a rockburst,the images of tracer particle,displacement and strain fields can be obtained,and the debris trajectory described.According to the observation of on-site tests,the dynamic rockburst is actually a gas–solid high speed flow process,which is caused by the interaction of rock fragments and surrounding air.With the help of analysis on high speed video and PIV images,the granite rockburst failure process is composed of six stages of platey fragment spalling and debris ejection.Meanwhile,the elastic energy for these six stages has been calculated to study the energy variation.The results indicate that the rockburst process can be summarized as:an initiating stage,intensive developing stage and gradual decay stage.This research will be helpful for our further understanding of the rockburst mechanism.

Dynamic responses of deep underground explosions based on improved Grigorian model

It is important to investigate the dynamic behaviors of deep rocks near explosion cavity to reveal the mechanisms of deformations and fractures. Some improvements are carried out for Grigorian model with focuses on the dilation effects and the relaxation effects of deep rocks, and the high pressure equations of states with Mie-Grüneisen form are also established. Numerical calculations of free field parameters for deep underground explosions are carried out based on the user subroutines which are compiled by means of the secondary development functions of LS-DYNA9703 D software. The histories of radial stress, radial velocity and radial displacement of rock particles are obtained, and the calculation results are compared with those of U.S. Hardhat nuclear test. It is indicated that the dynamic responses of free field for deep underground explosions are well simulated based on improved Grigorian model, and the calculation results are in good agreement with the data of U.S. Hardhat nuclear test. The peak values of particle velocities are consistent with those of test, but the waveform widths and the rising times are obviously greater than those without dilation effects. The attenuation rates of particle velocities are greater than the calculation results with classic plastic model, and they are consistent with the results of Hardhat nuclear test. The attenuation behaviors and the rising times of stress waves are well shown by introducing dilation effects and relaxation effects into the calculation model. Therefore, the defects of Grigorian model are avoided. It is also indicated that the initial stress has obvious influences on the waveforms of radial stress and the radial displacements of rock particles.

Microparticle Formation and Crystallization Rate of HMX with Supercritical CO_2 Antisolvent Recrystallization

Microparticle formation and crystallization rate of 1,3,5,7-tetranitro-l,3,5,7-tetraazacyclooctane (HMX) in acetone solution using supercritical carbon dioxide antisolvent (GAS) recrystallization were studied. Scanning electronic microscopy, X-ray diffraction and infrared radiation were used to examine particle size, crystallinity and chemical structure. The results show that B-HMX microparticle in different average size (2-9.5um) and with narrow size distribution were obtained by controlling the expansibility, expansion speed, initial concentration and temperature during recrystallization of HMX. The formation of nuclei may be a main cause of consumption of solute when the solution is expanded rapidly enough and the equilibrium concentration is lower, in which almost monodisperse microparticle can be obtained.

Deformation behavior of explosive detonation in electroformed nickel liner of shaped charge with nano-sized grains

Nickel liner of shaped charge with nano-sized grains was prepared by electroforming technique and the ultra-highstrain-rate deformation was performed by explosive detonation.The as-electroformed and post-deformed microstructures of electroformed nickel liner of shaped charge were observed by optical metallography(OM),scanning electron microscopy(SEM) and transmission electron microscopy(TEM) and the orientation distribution of the grains was analyzed by electron backscattering pattern(EBSP) technique.Both melting phenomenon in the jet fragment and recovery and recrystallization in the slug after ultra-high-strain-rate deformation were observed.The research evidence shows that dynamic recovery and recrystallization play an important role in ultra-high-strain-rate deformation for electroformed nickel liner of shaped charge with nano-sized grain.