大型隔爆型三相异步电动机抱轴故障的分析与处理

针对大型隔爆型三相异步电动机的抱轴故障案例进行分析和处理,对不同解决方案进行了预期评估,解决了电机的抱轴问题。

棉弹力纱经轴染色研究

经轴染色方法由于不过分筒,织造生产时是同层织布,避免了内外层颜色差异的纱聚集在一起,进而使经向条花风险可控。棉弹力纱由于弹性芯(氨纶等材料)遇热水后收缩剧烈,整体染色难度较大,经轴染色过程中容易出现爆轴、染花问题。文章主要研究棉弹力纱经轴密度、前处理工艺、染色工艺、后处理工艺等因素,结果表明,控制好经轴密度、经轴染色处理过程中的泵速参数可以有效解决经轴染色中的爆轴、染花问题,实现棉弹力纱经轴染色的顺利生产。

BDK62系列矿井主扇系统的改造与应用

针对通风系统存在的问题 ,介绍了BDK62系列矿井主扇系统的改造过程。

BDK62系列矿井主扇系统的改造与应用

叙述了 BDK6 2系列矿井主扇系统原设计中存在的问题 ,针对这些问题进行了相应的改造 。

Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress

Strainburst is one type of rockburst that generally occurs in deep tunnel.In this study,the strainburst behaviors of marble specimens were investigated under tunnel-excavation-induced stress condition,and two stress paths were designed,a commonly used stress path in true triaxial unloading rockburst tests and a new test path in which the intermediate principal stress was varied.During the tests,a high-speed camera was used to record the strainburst process,and an acoustic emission(AE)monitoring system was used to monitor the AE characteristics of failure.In these two stress paths,all the marble specimens exhibited strainbursts;however,when the intermediate principal stress was varied,the rockburst became more violent.The obtained results indicate that the intermediate principal stress has a significant effect on rockburst behavior of marble.Under a higher intermediate principal stress before the unloading,more elastic strain energy was accumulated in the specimen,and the cumulative AE energy was higher in the rockburst-induced failure,i.e.,more elastic strain energy was released during the failure.Therefore,more violent failure was observed:more rock fragments with a higher mass and larger size were ejected outward.

Experimental simulation investigation of influence of depth on spalling characteristics in circular hard rock tunnel

A series of true-triaxial compression tests were performed on red sandstone cubic specimens with a circular hole to investigate the influence of depth on induced spalling in tunnels.The failure process of the hole sidewalls was monitored and recorded in real-time by a micro-video monitoring equipment.The general failure evolution processes of the hole sidewall at different initial depths(500 m,1000 m and 1500 m)during the adjustment of vertical stress were obtained.The results show that the hole sidewall all formed spalling before resulting in strain rockburst,and ultimately forming a V-shaped notch.The far-field principal stress for the initial failure of the tunnel shows a good positive linear correlation with the depth.As the depth increases,the stress required for the initial failure of the tunnels clearly increased,the spalling became more intense;the size and mass of the rock fragments and depth and width of the V-shaped notches increased,and the range of the failure zone extends along the hole sidewall from the local area to the entire area.Therefore,as the depth increases,the support area around the tunnel should be increased accordingly to prevent spalling.

Acoustic emission precursors of static and dynamic instability for coarse-grained hard rock

To investigate the acoustic emission(AE)precursors of coarse-grained hard rock instability,an experimental study on the rockburst and slabbing process of granite was carried out using a true triaxial test system.The evolution of the AE signals was monitored and analyzed in terms of the AE hit rate,fractal dimension of the AE hit number,AE count rate,b-value,dominant frequency and microcrack type.The test results show that after rock slabbing occurs,the AE precursors that can be used to predict the final dynamic instability(rockburst)are as follows:indicators such as the AE hit rate and AE count rate suddenly increase and then suddenly decrease;the AE hit rate exhibits a“quiet period”;during the“quiet period”,a small number of high-amplitude and low-frequency hits occur,and the signals corresponding to shear fracture continue to increase.The AE precursors for the final static instability(spalling)are as follows:both the AE hit rate and the b-value continuously decrease,and intermittent sudden increases appear in the high-frequency hits or the AE count rate.

Strength weakening effect of high static pre-stressed granite subjected to low-frequency dynamic disturbance under uniaxial compression

This study aimed to elucidate the strength weakening effect of high static pre-stressed rocks subjected to low-frequency disturbances under uniaxial compression.Based on the uniaxial compressive strength(UCS)of granite under static loading,70%,80%,and 90%of UCS were selected as the initial high static pre-stress(σ_(p)),and then the pre-stressed rock specimens were disturbed by sinusoidal stress with amplitudes of 30%,20%,and 10%of UCS under low-frequency frequencies(f)of 1,2,5,and 10 Hz,respectively.The results show that the rockburst failure of pre-stressed granite is caused by low-frequency disturbance,and the failure strength is much lower than UCS.When theσp or f is constant,the specimen strength gradually decreases as the f or σ_(p) increases.The experimental study illustrates the influence mechanism of the strength weakening effect of high static pre-stress rocks under low-frequency dynamic disturbance,that is,high static pre-stress is the premise and leading factor of rock strength weakening,while low-frequency dynamic disturbance induces rock failure and affects the strength weakening degree.

Fisher discriminant analysis model and its application for prediction of classification of rockburst in deep-buried long tunnel

A Fisher discriminant analysis （FDA） model for the prediction of classification of rockburst in deep-buried long tunnel was established based on the Fisher discriminant theory and the actual characteristics of the project. First, the major factors of rockburst, such as the maximum tangential stress of the cavern wall σθ, uniaxial compressive strength σc, uniaxial tensile strength or, and the elastic energy index of rock Wet, were taken into account in the analysis. Three factors, Stress coefficient σθ/σc, rock brittleness coefficient σc/σt, and elastic energy index Wet, were defined as the criterion indices for rockburst prediction in the proposed model. After training and testing of 12 sets of measured data, the discriminant functions of FDA were solved, and the ratio of misdiscrimina- tion is zero. Moreover, the proposed model was used to predict rockbursts of Qinling tunnel along Xi＇an-Ankang railway. The results show that three forecast results are identical with the actual situation. Therefore, the prediction accuracy of the FDA model is acceptable.