The double directional solidification（DS） technique was developed to control the lamellar microstructures in primary β TiAl-Nb alloys.Polysynthetically twinned（PST） crystals with lamellar boundaries parallel to o...The double directional solidification（DS） technique was developed to control the lamellar microstructures in primary β TiAl-Nb alloys.Polysynthetically twinned（PST） crystals with lamellar boundaries parallel to or inclined 45o to the growth direction were achieved due to the complete peritectic transformation during directional solidification of the alloys with the dendritic solid/liquid interface.The PST crystals with aligned lamellar boundaries only parallel to the growth direction were produced when lamellar grains with lamellar boundaries in the same orientation were seeded by themselves under appropriate growth conditions.Low boron addition is harmful to align the lamellar orientation because of the growth of non-peritectic α phase.Due to the larger yttria particles and boride ribbons in the directionally solidified TiAl-Nb alloys,the tensile plastic elongations of the alloys are only close to 2%.展开更多
Although plating is a necessary process for SMT components, it alters the magnetic characteristics and inductance level of Ni-Cu-Zn ferrite components. The results of this work show that the following three factors in...Although plating is a necessary process for SMT components, it alters the magnetic characteristics and inductance level of Ni-Cu-Zn ferrite components. The results of this work show that the following three factors in plating affect these components, and the effects are different for Ni- and Sn-plating： （1） Plating layers exert stresses and react with the residual stress of components to change the inductance level, and the effect of the tin layer is greater than that of the nickel one; （2） The plating current induces a magnetic field inside the components directly and indirectly, and this remains as remanence inside the components and reduces the inductance level, and the effect level of Ni-plating is greater than that of Sn-plating; （3） The plating solution corrodes the interface of the termination and ferrite core of the components to release the residual stress, and causes an increase in inductance, and the effect of Sn-plating is greater than that of Ni-plating. In addition, the inductance level is the result of the net effect of these three factors, and if the sintering temperature is increased to change in the type of residual stress, the net effect will be changed.展开更多
We have studied 172 field-aligned currents （FACs） cases observed by the ClusterlI satellites when they crossed the plasma sheet boundary layer （PSBL） in the magnetotail from July to October 2001. We mainly analyze...We have studied 172 field-aligned currents （FACs） cases observed by the ClusterlI satellites when they crossed the plasma sheet boundary layer （PSBL） in the magnetotail from July to October 2001. We mainly analyzed the relationship between the characteristic of FACs at the PSBL in magnetotail and the Kp index. The main results indicated the followings： 1） In the different geomagnetic activity levels, the relative occurrence of FACs in PSBL increased monotonically with geomagnetic activity. 2） The density of FACs in PSBL increased monotonically with Kp index. In the storm main phase, the density of FACs increased dramatically, the maximum FACs approximately equaled 19.05 nA m-2 while Kp equaled 5.3） The variation of FACs density in PSBL was consistent with the variation of the Kp index. However, when AE〈800 nT, FACs density in PSBL increased with increasing AE, and when AE〉800 nT, it decreased with increasing AE. Therefore, our results suggested that the FACs density in PSBL had a closer correlation with Kp index.展开更多
基金Project (2011CB605500) supported by the National Basic Research Program of ChinaProject (FRF-MP-10-005B) supported by the Fundamental Research Funds for the Central Universities,China
文摘The double directional solidification（DS） technique was developed to control the lamellar microstructures in primary β TiAl-Nb alloys.Polysynthetically twinned（PST） crystals with lamellar boundaries parallel to or inclined 45o to the growth direction were achieved due to the complete peritectic transformation during directional solidification of the alloys with the dendritic solid/liquid interface.The PST crystals with aligned lamellar boundaries only parallel to the growth direction were produced when lamellar grains with lamellar boundaries in the same orientation were seeded by themselves under appropriate growth conditions.Low boron addition is harmful to align the lamellar orientation because of the growth of non-peritectic α phase.Due to the larger yttria particles and boride ribbons in the directionally solidified TiAl-Nb alloys,the tensile plastic elongations of the alloys are only close to 2%.
文摘Although plating is a necessary process for SMT components, it alters the magnetic characteristics and inductance level of Ni-Cu-Zn ferrite components. The results of this work show that the following three factors in plating affect these components, and the effects are different for Ni- and Sn-plating： （1） Plating layers exert stresses and react with the residual stress of components to change the inductance level, and the effect of the tin layer is greater than that of the nickel one; （2） The plating current induces a magnetic field inside the components directly and indirectly, and this remains as remanence inside the components and reduces the inductance level, and the effect level of Ni-plating is greater than that of Sn-plating; （3） The plating solution corrodes the interface of the termination and ferrite core of the components to release the residual stress, and causes an increase in inductance, and the effect of Sn-plating is greater than that of Ni-plating. In addition, the inductance level is the result of the net effect of these three factors, and if the sintering temperature is increased to change in the type of residual stress, the net effect will be changed.
基金supported by the National Natural Science Foundation of China (Grant Nos. 40804031, 41074114, 40921063)the Specialized Research Fund for State Key Laboratories
文摘We have studied 172 field-aligned currents （FACs） cases observed by the ClusterlI satellites when they crossed the plasma sheet boundary layer （PSBL） in the magnetotail from July to October 2001. We mainly analyzed the relationship between the characteristic of FACs at the PSBL in magnetotail and the Kp index. The main results indicated the followings： 1） In the different geomagnetic activity levels, the relative occurrence of FACs in PSBL increased monotonically with geomagnetic activity. 2） The density of FACs in PSBL increased monotonically with Kp index. In the storm main phase, the density of FACs increased dramatically, the maximum FACs approximately equaled 19.05 nA m-2 while Kp equaled 5.3） The variation of FACs density in PSBL was consistent with the variation of the Kp index. However, when AE〈800 nT, FACs density in PSBL increased with increasing AE, and when AE〉800 nT, it decreased with increasing AE. Therefore, our results suggested that the FACs density in PSBL had a closer correlation with Kp index.
