疏浚工程固化处理后的淤泥属于高浓度非牛顿浆体。通过淤泥固化土的流动度试验,采用H-B流变模型进行流动度二维瞬态数值模拟,确定其屈服应力值。采用水固比为0.8、0.9和1.0的淤泥固化土,在管道管径为150、200和250 mm,流速为1.5、2.5和3...疏浚工程固化处理后的淤泥属于高浓度非牛顿浆体。通过淤泥固化土的流动度试验,采用H-B流变模型进行流动度二维瞬态数值模拟,确定其屈服应力值。采用水固比为0.8、0.9和1.0的淤泥固化土,在管道管径为150、200和250 mm,流速为1.5、2.5和3.5 m s的工况条件下,分析其水力输送特性,并拟合水力损失计算公式。结果表明,流速、黏度和管径对水力损失均有比较明显的影响,水力损失随流速和黏度的增加而增加,随管径的增加而减小。展开更多
The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the fl...The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the flow domain are presented by using a fluid dynamics analysis package (Polyflow). The numerical results show that the temperatures are high in the intermeshing region and on the screw surface, the maximum pressure and the minimum pressure occur in the intermeshing region, and the flow rate is almost proportional to the screw speed.展开更多
Aim To discuss the existence of periodic solutions for the first boundary problem of incompressible non Newtonian fluids, a problem arising from polymer processing and concerned with the first initial boundary valu...Aim To discuss the existence of periodic solutions for the first boundary problem of incompressible non Newtonian fluids, a problem arising from polymer processing and concerned with the first initial boundary value problem of nonstationary flow of the non Newtonian viscous incompressible fluids through slit dice. Methods The monotone operator theory and Schauders fixed point theorem were used. Results and Conclusion The existence theorem of periodic solutions of a Dirichlet problem is proved under reasonable conditions.展开更多
文摘疏浚工程固化处理后的淤泥属于高浓度非牛顿浆体。通过淤泥固化土的流动度试验,采用H-B流变模型进行流动度二维瞬态数值模拟,确定其屈服应力值。采用水固比为0.8、0.9和1.0的淤泥固化土,在管道管径为150、200和250 mm,流速为1.5、2.5和3.5 m s的工况条件下,分析其水力输送特性,并拟合水力损失计算公式。结果表明,流速、黏度和管径对水力损失均有比较明显的影响,水力损失随流速和黏度的增加而增加,随管径的增加而减小。
文摘The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the flow domain are presented by using a fluid dynamics analysis package (Polyflow). The numerical results show that the temperatures are high in the intermeshing region and on the screw surface, the maximum pressure and the minimum pressure occur in the intermeshing region, and the flow rate is almost proportional to the screw speed.
文摘Aim To discuss the existence of periodic solutions for the first boundary problem of incompressible non Newtonian fluids, a problem arising from polymer processing and concerned with the first initial boundary value problem of nonstationary flow of the non Newtonian viscous incompressible fluids through slit dice. Methods The monotone operator theory and Schauders fixed point theorem were used. Results and Conclusion The existence theorem of periodic solutions of a Dirichlet problem is proved under reasonable conditions.
