Prediction of the drilling penetration rate is one of the important parameters in mining operations. This parameter has a direct impact on the mine planning and cost of mining operations, Generally, effective paramete...Prediction of the drilling penetration rate is one of the important parameters in mining operations. This parameter has a direct impact on the mine planning and cost of mining operations, Generally, effective parameters on the penetration rate is divided into two classes： rock mass properties and specifications of the machine, The chemical components of intact rock have a direct effect in determining rock mechan- ical properties, Theses parameters usually have not been investigated in any research on the rock drill- ability, In this study, physical and mechanical properties of iron ore were studied based on the amount of magnetite percent, According to the results of the tests, the effective parameters on the pen- etration rate of the rotary drilling machines were divided into three classes： specifications of the machi- nes, rock mass properties and chemical component of intact rock, Then, the rock drillahility was studied using rock engineering systems, The results showed that feed, rotation, rock mass index and iron oxide percent have important effect on penetration rate, Then a quadratic equation with 0,896 determination coefficient has been obtained, Also, the results showed that chemical components can he described as new parameters in rotary drill penetration rate,展开更多
Evaluating the pre-Jurassic marine source rocks in China has been difficult because these rocks are generally too highor over-maturated for most traditional methods to work.As to the remaining parameter TOC (%),its lo...Evaluating the pre-Jurassic marine source rocks in China has been difficult because these rocks are generally too highor over-maturated for most traditional methods to work.As to the remaining parameter TOC (%),its lower limit for recognizing the carbonate source rocks in China has been in dispute.Nineteen Phanerozoic sections in the Middle-Upper Yangtze Platform and the Guizhou-Hunan-Guangxi Basin have been studied in search for a different approach to complementing the traditional evaluation method for these source rocks.We have applied a geobiological approach to tracing the organic carbon (OC) output and accumulation from the living stage (primary productivity) to the post-mortem deposited remains,and finally to the preserved burial organics.Four biological and geological parameters are employed to represent the OC of the three stages.A series of proxies of these parameters are discussed and integrated to establish a geobiological evaluation system independent of TOC and other traditional methods.Here we use the Guangyuan section in Sichuan as an example for the geobiological evaluation.Our results indicate that in the argillaceous rocks,the geobiological parameters show the qualified source rocks in accordance with high TOC values;but in the carbonates,the good source rocks delineated by the geobiological parameters have a wide range of TOC,from 0.03% to 1.59%,mostly<0.3%.We suggest that it is still premature to set TOC=0.3% or 0.5% as the lower limit for the pre-Jurassic carbonate source rocks in South China.展开更多
文摘Prediction of the drilling penetration rate is one of the important parameters in mining operations. This parameter has a direct impact on the mine planning and cost of mining operations, Generally, effective parameters on the penetration rate is divided into two classes： rock mass properties and specifications of the machine, The chemical components of intact rock have a direct effect in determining rock mechan- ical properties, Theses parameters usually have not been investigated in any research on the rock drill- ability, In this study, physical and mechanical properties of iron ore were studied based on the amount of magnetite percent, According to the results of the tests, the effective parameters on the pen- etration rate of the rotary drilling machines were divided into three classes： specifications of the machi- nes, rock mass properties and chemical component of intact rock, Then, the rock drillahility was studied using rock engineering systems, The results showed that feed, rotation, rock mass index and iron oxide percent have important effect on penetration rate, Then a quadratic equation with 0,896 determination coefficient has been obtained, Also, the results showed that chemical components can he described as new parameters in rotary drill penetration rate,
基金supported by National Basic Research Program of China(Grant No.2011CB808800)Key Project of China Petroleum&Chemical Corporation(Grant No.G0800-06-2S-319)+1 种基金NSFC Program for Innovative Research Team(Grant No.40621002)the"111"Project(Grant No.B08030)
文摘Evaluating the pre-Jurassic marine source rocks in China has been difficult because these rocks are generally too highor over-maturated for most traditional methods to work.As to the remaining parameter TOC (%),its lower limit for recognizing the carbonate source rocks in China has been in dispute.Nineteen Phanerozoic sections in the Middle-Upper Yangtze Platform and the Guizhou-Hunan-Guangxi Basin have been studied in search for a different approach to complementing the traditional evaluation method for these source rocks.We have applied a geobiological approach to tracing the organic carbon (OC) output and accumulation from the living stage (primary productivity) to the post-mortem deposited remains,and finally to the preserved burial organics.Four biological and geological parameters are employed to represent the OC of the three stages.A series of proxies of these parameters are discussed and integrated to establish a geobiological evaluation system independent of TOC and other traditional methods.Here we use the Guangyuan section in Sichuan as an example for the geobiological evaluation.Our results indicate that in the argillaceous rocks,the geobiological parameters show the qualified source rocks in accordance with high TOC values;but in the carbonates,the good source rocks delineated by the geobiological parameters have a wide range of TOC,from 0.03% to 1.59%,mostly<0.3%.We suggest that it is still premature to set TOC=0.3% or 0.5% as the lower limit for the pre-Jurassic carbonate source rocks in South China.
