The study of oxide heteroepitaxy has been hindered by the issues of misfit strain and substrate clamping,which impede both the optimization of performance and the acquisition of a fundamental understanding of oxide sy...The study of oxide heteroepitaxy has been hindered by the issues of misfit strain and substrate clamping,which impede both the optimization of performance and the acquisition of a fundamental understanding of oxide systems.Recently,however,the development of freestanding oxide membranes has provided a plausible solution to these substrate limitations.Single-crystalline functional oxide films can be released from their substrates without incurring significant damage and can subsequently be transferred to any substrate of choice.This paper discusses recent advancements in the fabrication,adjustable physical properties,and various applications of freestanding oxide perovskite films.First,we present the primary strategies employed for the synthesis and transfer of these freestanding perovskite thin films.Second,we explore the main functionalities observed in freestanding perovskite oxide thin films,with special attention to the tunable functionalities and physical properties of these freestanding perovskite membranes under varying strain states.Next,we encapsulate three representative devices based on freestanding oxide films.Overall,this review highlights the potential of freestanding oxide films for the study of novel functionalities and flexible electronics.展开更多
Mg-La alloys were prepared by constant voltage electrolysis in the molten salt system of MgC12-LaC13-KC1 at 750℃, with a graphite crucible as the anode and a tungsten rod as the cathode. The effect of oxide and fluor...Mg-La alloys were prepared by constant voltage electrolysis in the molten salt system of MgC12-LaC13-KC1 at 750℃, with a graphite crucible as the anode and a tungsten rod as the cathode. The effect of oxide and fluoride addition on the electrolysis was investigated comprehensively. X-ray diffraction (XRD) was used to characterize some of the Mg-La alloy products and the sludges. As the content of MgO or La203 in the electrolyte increased, both the current efficiency and the mass of alloy product decreased, indicating that both MgO and La203 may take part in the reactions in the electrolyte. When the same mass of the oxide was added, compared with La203, MgO had a more pronounced effect on both the current efficiency and the mass of alloy product. XRD studies confirmed the formation of LaOC1 when MgO or LazO3 was added into the electrolyte. The formation of LaOCl sludge would be the main reason for the negative effect of the oxide addition on both the current efficiency and the mass of alloy. In the electrolytic system, the addition of CaF2 was not helpful to suppress the negative effect of MgO on the electrolysis, probably due to the complex reactions of the La compounds in the electrolyte.展开更多
Plant volatiles induced by wounding play key roles in plant-insect and plant-plant interactions. To deeply understand the mechanism of their induction by wounding and their functions in interplant communications, four...Plant volatiles induced by wounding play key roles in plant-insect and plant-plant interactions. To deeply understand the mechanism of their induction by wounding and their functions in interplant communications, four diverse tree species: ashleaf maples ( Acer negundo L.), hankow willow (Salix matsudana Koidz.), Chinese white poplar ( Populus tomentosa Carr.) and poplar opera 8277 (P. simonii x P. pyramibalis cv.), were used as materials. The blends of volatiles collected after damage were detected with GCMS. Most of the induced compounds reach high concentrations in 5 h. They are acyclic monoterpenes, fatty acid derivatives, and aromatic compounds. To authors' knowledge, dimethyl adipate, diisobutyl succinate and benthothiazole have never been reported in previous herbivore insect-plant systems, After being damaged 2 h, green leaf volatiles were released in large amount. The repellents were detected in higher concentration after 24 h. The time of releasing is different within different species, but many kinds of volatiles widely existed in different trees. There were some difference among species. Health ashleaf maple released more terpenoids, but poplars and willow produced more aromatic compounds.展开更多
The production and characterization of a monoclonal antibody (MAb AB10) against GA 3 glucoside as well as GA 3 is described. MAb AB10 was derived from an immunogen in which human serum albumin (HSA) was linked to G...The production and characterization of a monoclonal antibody (MAb AB10) against GA 3 glucoside as well as GA 3 is described. MAb AB10 was derived from an immunogen in which human serum albumin (HSA) was linked to GA 3 at carbon 3. This antibody showed high affinity for GA 3 glucoside as well as for 13 hydroxy gibberellins (GA 1, GA 3, GA 5, etc). The affinity of MAb AB10 for 13 hydroxy GAs was significantly reduced by methylation of the 7 oic acid but not by glycosylation of 3 hydroxyl group. Based on this antibody, both of competitive enzyme linked immunosorbent assays (ELISAs) for GA 3 glucoside and for GA 3 were developed. These two ELISAs displayed linear detection ranges from 0 2 pmol to 20 pmol. Using these assays, the fluctuation of GA 3 like and GA 3 glucoside like substances in the leaves of Rumex japonicus was investigated. The results indicated that the glycosylation of free GAs was connected with leaf senescence and that the function of 6 benzyl amino purine in retarding the leaf senescence was probably related to delaying the process of glycosylation of free GAs.展开更多
X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses were carried out to investigate the surface species and interfacial reactions during bioleaching of chalcopyrite by different strains of ...X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses were carried out to investigate the surface species and interfacial reactions during bioleaching of chalcopyrite by different strains of moderately thermophilic bacteria (45 °C). Results show that monosulfide (CuS), disulfide (S22?), polysulfide (Sn2?), elemental sulfur (S0) and sulfate (SO42?) are the main intermediate species on the surface of chalcopyrite during bioleaching byA. caldus,S. thermosulfidooxidans andL. ferriphilum. The low kinetics of dissolution of chalcopyrite inA. caldus can be mainly attributed to the incomplete dissolution of chalcopyrite and the passivation layer of polysulfide. Polysulfide and jarosite should be mainly responsible for the passivation of chalcopyrite in bioleaching byL. ferriphilumorS. thermosulfidooxidans. However, elemental sulfur should not be the main composition of passivation layer of chalcopyrite during bioleaching.展开更多
Most of volatile organic compounds (VOCs) are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalys...Most of volatile organic compounds (VOCs) are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.展开更多
Aim To design a practical synthetic route of anisodine. Methods Starting from3α-hydroxy-6β-acetyltropine, anisodine was synthesized in 11 steps. Result Anisodine wasobtainded with an overall yield of 2.6 % . Conclus...Aim To design a practical synthetic route of anisodine. Methods Starting from3α-hydroxy-6β-acetyltropine, anisodine was synthesized in 11 steps. Result Anisodine wasobtainded with an overall yield of 2.6 % . Conclusion Total synthetic route of anisodine wasachieved which may afford a possible route for commercial preparation of anisodine.展开更多
Based on the sensitivity of geophysical response to gas hydrates contained in sediments, we studied the prediction of gas hydrates with seismic techniques, including seismic attributes analysis, AVO, inverted velocity...Based on the sensitivity of geophysical response to gas hydrates contained in sediments, we studied the prediction of gas hydrates with seismic techniques, including seismic attributes analysis, AVO, inverted velocity field construction for dipping formations, and pseudo-well constrained impedance inversion. We used an optimal integration of geophysical techniques results in a set of reliable and effective workflows to predict gas hydrates. The results show that the integrated analysis of the combination of reflectivity amplitude, instantaneous phase, interval velocity, relative impedance, absolute impedance, and AVO intercept is a valid combination of techniques for identifying the BSR (Bottom Simulated Reflector) from the lower boundary of the gas hydrates. Integration of seismic sections, relative and absolute impedance sections, and interval velocity sections can improve the validity of gas hydrates determination. The combination of instantaneous frequency, energy half attenuation time, interval velocity, AVO intercept, AVO product, and AVO fluid factor accurately locates the escaped gas beneath the BSR. With these conclusions, the combined techniques have been used to successfully predict the gas hydrates in the Dongsha Sea area.展开更多
The aim of the study is to investigate the contents of trace element Se, Cd, Pb in three plants including burdock, ginkgol and garlic via graphite furnace atomic absorption and standard addition method. The results sh...The aim of the study is to investigate the contents of trace element Se, Cd, Pb in three plants including burdock, ginkgol and garlic via graphite furnace atomic absorption and standard addition method. The results show that Se in burdock stem, skin and leaf are 32.40, 48.63, 38.10 μg/g, respectively; Cd in burdock stem, skin and leaf are 0. 160 0, 0. 300 0, 0. 140 0 μg/g, respectively; Cd in burdock stem, skin and leaf are 2. 020, 3. 960, 2. 410 μg/g, respectively. In the ginkgo and ginko leaf, Se contents are 17.63 and 16.91 μg/g, respectively ; for Cd are 0. 181 0 and 0.2020μg/g, respectively ; for Pb are 3. 572 and 4. 021 μg/g, respectively. In garlic, Se, Cd and Pb are 73. 900 0, 6. 900 0 and 0. 390 0, respectively. All the standard deviations of measured results are below 2.3%, recovery rate are from 99% to 101%.展开更多
Biomass from SAR data was assimilated into crop growth model to describe relationship between crop biomass and crop growth time to improve estimation accuracy of biomass. In addition, inverse model was established in ...Biomass from SAR data was assimilated into crop growth model to describe relationship between crop biomass and crop growth time to improve estimation accuracy of biomass. In addition, inverse model was established in order to estimate biomass according to relationship between biomass and backscattering coefficients from SAR data. Based on cost function, parameters of growth model were optimized as per conjugate gradient method, minimizing the differences between estimated biomass and inversion values from SAR data. The results indicated that the simulated biomass using the revised growth model with SAR data was consistent with the measured one in time distribution and even higher in accuracy than that without SAR data. Hence, the key parameters of crop growth model could be revised by real-time growth information from SAR data and accuracy of the simulated biomass could be improved accordingly.展开更多
A set of three sphingolipids, N-2′-hydroxyplmitoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingadiene (A), N-2′-hydroxyl-3′E-octadecenoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingediene (B) and N-palmito...A set of three sphingolipids, N-2′-hydroxyplmitoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingadiene (A), N-2′-hydroxyl-3′E-octadecenoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingediene (B) and N-palmitoyldihydrosphingosine (C), were isolated from two marine-derived mangrove endophytic fungal strains (strains No. 1924 and 3893) from the South China Sea. Their structures were elucidated by 2D NMR and FABMS methods. It is the first time that these sphingolipids were separated and obtained from marine-derived mangrove endophytic fungus from the South China Sea.展开更多
In the study, analysis was made on present situation and development measures of geographical indications and cultural heritage protection of famous teas in Hubei Province. In addition, 8 related suggestions were prop...In the study, analysis was made on present situation and development measures of geographical indications and cultural heritage protection of famous teas in Hubei Province. In addition, 8 related suggestions were proposed as well.展开更多
Carbonaceous gold mines are important refractory gold ores. The previous results demonstrate that the carbonaceous matter is mainly composed of elemental carbon, organic acid and hydrocarbons. The dissolved aurocyanid...Carbonaceous gold mines are important refractory gold ores. The previous results demonstrate that the carbonaceous matter is mainly composed of elemental carbon, organic acid and hydrocarbons. The dissolved aurocyanide complex is robbed by adsorption of carbonaceous matter, which is similar to activated carbon in cyanide leaching of gold. The pretreatment methods of carbonaceous gold ores were introduced, including high temperature roasting, bio-oxidation, chemical oxidation, competitive adsorption, barrier inhibition and microwave roasting. Recently, bio-oxidation was developed rapidly due to its advantages such as mild conditions, simple processes, low energy consumption and friendly environment. The known microorganisms related with bio-oxidation pretreatment mainly are chemolithotroph bacteria such as Thiobacillus ferrooxidans, Thiobacillus thiooxidans and Leptospirillum ferrooxidans. The researches on decomposing and passivating carbonaceous matter were commenced by Phanerochaete chrysosporium, Pseudomonadaceae and Streptomyces setonii. Finally, the main problems were analyzed and the application prospect of this technique was looked forward.展开更多
In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack...In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack cementation process with a slurry pack cementation mixture composed of TiO2 as titanizing source, pure Al powder as aluminzing source and also a reducer for titanizing, an activator of NH4Cl and albumen (egg white) as cohesive agent. The Ti-Al coating was fabricated on the surface of electro-deposited nickel layer on copper matrix followed by the slurry pack cementation process. The effects of slurry pack cementation temperature on the microstructures and wear resistance of Ti-Al coating were studied. The results show that the microstructure of the coating changed from NiAl+Ni3(Ti,Al) to NiAl +Ni3(Ti,Al)+Ni4Ti3 to Ni4Ti3+NiAl, and to NiAl+Ni3(Ti,Al)+NiTi with slurry pack cementation temperature ranging from 800 ℃ to 950 ℃ in 12 h. The friction coefficient of Ti-Al coating decreased and the hardness increased with increasing the slurry pack cementation temperature. The minimum friction coefficient was 1/3 and the minimum hardness was 5 times larger than that of pure copper.展开更多
From the roots of Rhaponticum uniflorum a new triterpene was isolated together with ursolic acid(2), 3-oxo-19a-hydroxyurs-12-en-28-oic acid (3), pomolic acid (4), 2a,3a,19a-trihydroxyurs-12-en-28-oic acid (5), arctic ...From the roots of Rhaponticum uniflorum a new triterpene was isolated together with ursolic acid(2), 3-oxo-19a-hydroxyurs-12-en-28-oic acid (3), pomolic acid (4), 2a,3a,19a-trihydroxyurs-12-en-28-oic acid (5), arctic acid (6), catechin (7) and b-sitosterol (8). The structure of the new compound was elucidated as 2a,3a,19a,25-tetrahydroxyurs-12-en-23,28-dioic acid (1) on the basis of spectral and chemical methods.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(WK9990000102,WK2030000035).
文摘The study of oxide heteroepitaxy has been hindered by the issues of misfit strain and substrate clamping,which impede both the optimization of performance and the acquisition of a fundamental understanding of oxide systems.Recently,however,the development of freestanding oxide membranes has provided a plausible solution to these substrate limitations.Single-crystalline functional oxide films can be released from their substrates without incurring significant damage and can subsequently be transferred to any substrate of choice.This paper discusses recent advancements in the fabrication,adjustable physical properties,and various applications of freestanding oxide perovskite films.First,we present the primary strategies employed for the synthesis and transfer of these freestanding perovskite thin films.Second,we explore the main functionalities observed in freestanding perovskite oxide thin films,with special attention to the tunable functionalities and physical properties of these freestanding perovskite membranes under varying strain states.Next,we encapsulate three representative devices based on freestanding oxide films.Overall,this review highlights the potential of freestanding oxide films for the study of novel functionalities and flexible electronics.
基金Projects(2012BAE01B04)supported by the National Key and Technology R&D Program of ChinaProject(KZCX2-XB3-06)supported by Western Action Program,Chinese Academy of Sciences
文摘Mg-La alloys were prepared by constant voltage electrolysis in the molten salt system of MgC12-LaC13-KC1 at 750℃, with a graphite crucible as the anode and a tungsten rod as the cathode. The effect of oxide and fluoride addition on the electrolysis was investigated comprehensively. X-ray diffraction (XRD) was used to characterize some of the Mg-La alloy products and the sludges. As the content of MgO or La203 in the electrolyte increased, both the current efficiency and the mass of alloy product decreased, indicating that both MgO and La203 may take part in the reactions in the electrolyte. When the same mass of the oxide was added, compared with La203, MgO had a more pronounced effect on both the current efficiency and the mass of alloy product. XRD studies confirmed the formation of LaOC1 when MgO or LazO3 was added into the electrolyte. The formation of LaOCl sludge would be the main reason for the negative effect of the oxide addition on both the current efficiency and the mass of alloy. In the electrolytic system, the addition of CaF2 was not helpful to suppress the negative effect of MgO on the electrolysis, probably due to the complex reactions of the La compounds in the electrolyte.
文摘Plant volatiles induced by wounding play key roles in plant-insect and plant-plant interactions. To deeply understand the mechanism of their induction by wounding and their functions in interplant communications, four diverse tree species: ashleaf maples ( Acer negundo L.), hankow willow (Salix matsudana Koidz.), Chinese white poplar ( Populus tomentosa Carr.) and poplar opera 8277 (P. simonii x P. pyramibalis cv.), were used as materials. The blends of volatiles collected after damage were detected with GCMS. Most of the induced compounds reach high concentrations in 5 h. They are acyclic monoterpenes, fatty acid derivatives, and aromatic compounds. To authors' knowledge, dimethyl adipate, diisobutyl succinate and benthothiazole have never been reported in previous herbivore insect-plant systems, After being damaged 2 h, green leaf volatiles were released in large amount. The repellents were detected in higher concentration after 24 h. The time of releasing is different within different species, but many kinds of volatiles widely existed in different trees. There were some difference among species. Health ashleaf maple released more terpenoids, but poplars and willow produced more aromatic compounds.
文摘The production and characterization of a monoclonal antibody (MAb AB10) against GA 3 glucoside as well as GA 3 is described. MAb AB10 was derived from an immunogen in which human serum albumin (HSA) was linked to GA 3 at carbon 3. This antibody showed high affinity for GA 3 glucoside as well as for 13 hydroxy gibberellins (GA 1, GA 3, GA 5, etc). The affinity of MAb AB10 for 13 hydroxy GAs was significantly reduced by methylation of the 7 oic acid but not by glycosylation of 3 hydroxyl group. Based on this antibody, both of competitive enzyme linked immunosorbent assays (ELISAs) for GA 3 glucoside and for GA 3 were developed. These two ELISAs displayed linear detection ranges from 0 2 pmol to 20 pmol. Using these assays, the fluctuation of GA 3 like and GA 3 glucoside like substances in the leaves of Rumex japonicus was investigated. The results indicated that the glycosylation of free GAs was connected with leaf senescence and that the function of 6 benzyl amino purine in retarding the leaf senescence was probably related to delaying the process of glycosylation of free GAs.
基金Projects(51374248,51320105006)supported by the National Natural Science Foundation of ChinaProject(NCET-13-0595)supported by the Program for New Century Excellent Talents in University,ChinaProject(2014T70692)supported by China Postdoctoral Science Foundation
文摘X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses were carried out to investigate the surface species and interfacial reactions during bioleaching of chalcopyrite by different strains of moderately thermophilic bacteria (45 °C). Results show that monosulfide (CuS), disulfide (S22?), polysulfide (Sn2?), elemental sulfur (S0) and sulfate (SO42?) are the main intermediate species on the surface of chalcopyrite during bioleaching byA. caldus,S. thermosulfidooxidans andL. ferriphilum. The low kinetics of dissolution of chalcopyrite inA. caldus can be mainly attributed to the incomplete dissolution of chalcopyrite and the passivation layer of polysulfide. Polysulfide and jarosite should be mainly responsible for the passivation of chalcopyrite in bioleaching byL. ferriphilumorS. thermosulfidooxidans. However, elemental sulfur should not be the main composition of passivation layer of chalcopyrite during bioleaching.
基金supported by the National High Technology Research and Development Program (863 Program,2015AA034603)the National Natural Science Foundation of China (21377008,201077007,20973017)+1 种基金Foundation on the Creative Research Team Construction Promotion Project of Beijing Municipal InstitutionsScientific Research Base Construction-Science and Technology Creation Platform National Materials Research Base Construction~~
文摘Most of volatile organic compounds (VOCs) are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.
文摘Aim To design a practical synthetic route of anisodine. Methods Starting from3α-hydroxy-6β-acetyltropine, anisodine was synthesized in 11 steps. Result Anisodine wasobtainded with an overall yield of 2.6 % . Conclusion Total synthetic route of anisodine wasachieved which may afford a possible route for commercial preparation of anisodine.
基金National Gas Hydrates Integral Appraisal Project (GZH200200203-05).
文摘Based on the sensitivity of geophysical response to gas hydrates contained in sediments, we studied the prediction of gas hydrates with seismic techniques, including seismic attributes analysis, AVO, inverted velocity field construction for dipping formations, and pseudo-well constrained impedance inversion. We used an optimal integration of geophysical techniques results in a set of reliable and effective workflows to predict gas hydrates. The results show that the integrated analysis of the combination of reflectivity amplitude, instantaneous phase, interval velocity, relative impedance, absolute impedance, and AVO intercept is a valid combination of techniques for identifying the BSR (Bottom Simulated Reflector) from the lower boundary of the gas hydrates. Integration of seismic sections, relative and absolute impedance sections, and interval velocity sections can improve the validity of gas hydrates determination. The combination of instantaneous frequency, energy half attenuation time, interval velocity, AVO intercept, AVO product, and AVO fluid factor accurately locates the escaped gas beneath the BSR. With these conclusions, the combined techniques have been used to successfully predict the gas hydrates in the Dongsha Sea area.
基金School Fund of Xuzhou Institute of Technology (XKY200614)~~
文摘The aim of the study is to investigate the contents of trace element Se, Cd, Pb in three plants including burdock, ginkgol and garlic via graphite furnace atomic absorption and standard addition method. The results show that Se in burdock stem, skin and leaf are 32.40, 48.63, 38.10 μg/g, respectively; Cd in burdock stem, skin and leaf are 0. 160 0, 0. 300 0, 0. 140 0 μg/g, respectively; Cd in burdock stem, skin and leaf are 2. 020, 3. 960, 2. 410 μg/g, respectively. In the ginkgo and ginko leaf, Se contents are 17.63 and 16.91 μg/g, respectively ; for Cd are 0. 181 0 and 0.2020μg/g, respectively ; for Pb are 3. 572 and 4. 021 μg/g, respectively. In garlic, Se, Cd and Pb are 73. 900 0, 6. 900 0 and 0. 390 0, respectively. All the standard deviations of measured results are below 2.3%, recovery rate are from 99% to 101%.
基金Supported by National High-tech R & D Program of China (863 Program)(2007AA12Z174)~~
文摘Biomass from SAR data was assimilated into crop growth model to describe relationship between crop biomass and crop growth time to improve estimation accuracy of biomass. In addition, inverse model was established in order to estimate biomass according to relationship between biomass and backscattering coefficients from SAR data. Based on cost function, parameters of growth model were optimized as per conjugate gradient method, minimizing the differences between estimated biomass and inversion values from SAR data. The results indicated that the simulated biomass using the revised growth model with SAR data was consistent with the measured one in time distribution and even higher in accuracy than that without SAR data. Hence, the key parameters of crop growth model could be revised by real-time growth information from SAR data and accuracy of the simulated biomass could be improved accordingly.
基金the National "863" Program of China (No. 2001AA624010)the Guangdong Provincial Natural Science Foundation of China (No. 04300674)+1 种基金 the Guangdong Provincial Science and Technology Program Foundation of China (No.2004B30101017) the Foshan City Foundation for the Development of Science and Technology (No. 2005081871).
文摘A set of three sphingolipids, N-2′-hydroxyplmitoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingadiene (A), N-2′-hydroxyl-3′E-octadecenoyl-1-O-β-D-glucopyranosyl-9-methyl-4E, 8E-sphingediene (B) and N-palmitoyldihydrosphingosine (C), were isolated from two marine-derived mangrove endophytic fungal strains (strains No. 1924 and 3893) from the South China Sea. Their structures were elucidated by 2D NMR and FABMS methods. It is the first time that these sphingolipids were separated and obtained from marine-derived mangrove endophytic fungus from the South China Sea.
基金Supported by Project of Scientific and Technological Innovations by Ministry of Culture(2011021)Foundation Project of Humanities and Social Sciences of Education Department (11YJA850019)Project supported by "11th Five-Year Plan" of Hubei Socia Sciences Foundation ([2010]274)~~
文摘In the study, analysis was made on present situation and development measures of geographical indications and cultural heritage protection of famous teas in Hubei Province. In addition, 8 related suggestions were proposed as well.
基金Projects(51174062,51104036)supported by the National Natural Science Foundation of ChinaProject(2012BAE06B05)supported by the National Science and Technology Support Program of China during the 12th Five-Year Plan Period+1 种基金Projects(2012AA061502,2012AA061501)supported by the National High-Tech Research and Development Program of ChinaProjects(N120602006,N110302002,N110602005)supported by Fundamental Research Funds for the Central Universities of China
文摘Carbonaceous gold mines are important refractory gold ores. The previous results demonstrate that the carbonaceous matter is mainly composed of elemental carbon, organic acid and hydrocarbons. The dissolved aurocyanide complex is robbed by adsorption of carbonaceous matter, which is similar to activated carbon in cyanide leaching of gold. The pretreatment methods of carbonaceous gold ores were introduced, including high temperature roasting, bio-oxidation, chemical oxidation, competitive adsorption, barrier inhibition and microwave roasting. Recently, bio-oxidation was developed rapidly due to its advantages such as mild conditions, simple processes, low energy consumption and friendly environment. The known microorganisms related with bio-oxidation pretreatment mainly are chemolithotroph bacteria such as Thiobacillus ferrooxidans, Thiobacillus thiooxidans and Leptospirillum ferrooxidans. The researches on decomposing and passivating carbonaceous matter were commenced by Phanerochaete chrysosporium, Pseudomonadaceae and Streptomyces setonii. Finally, the main problems were analyzed and the application prospect of this technique was looked forward.
基金Projects(YKJ201203,CKJB201205)supported by the Nanjing Institute of Technology,China
文摘In order to improve the wear resistance properties of copper substrate, a layer of electroplated nickel was firstly deposited on copper substrate, subsequently these electroplated specimens were treated by slurry pack cementation process with a slurry pack cementation mixture composed of TiO2 as titanizing source, pure Al powder as aluminzing source and also a reducer for titanizing, an activator of NH4Cl and albumen (egg white) as cohesive agent. The Ti-Al coating was fabricated on the surface of electro-deposited nickel layer on copper matrix followed by the slurry pack cementation process. The effects of slurry pack cementation temperature on the microstructures and wear resistance of Ti-Al coating were studied. The results show that the microstructure of the coating changed from NiAl+Ni3(Ti,Al) to NiAl +Ni3(Ti,Al)+Ni4Ti3 to Ni4Ti3+NiAl, and to NiAl+Ni3(Ti,Al)+NiTi with slurry pack cementation temperature ranging from 800 ℃ to 950 ℃ in 12 h. The friction coefficient of Ti-Al coating decreased and the hardness increased with increasing the slurry pack cementation temperature. The minimum friction coefficient was 1/3 and the minimum hardness was 5 times larger than that of pure copper.
文摘From the roots of Rhaponticum uniflorum a new triterpene was isolated together with ursolic acid(2), 3-oxo-19a-hydroxyurs-12-en-28-oic acid (3), pomolic acid (4), 2a,3a,19a-trihydroxyurs-12-en-28-oic acid (5), arctic acid (6), catechin (7) and b-sitosterol (8). The structure of the new compound was elucidated as 2a,3a,19a,25-tetrahydroxyurs-12-en-23,28-dioic acid (1) on the basis of spectral and chemical methods.