A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder ble...A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder blends as the precursor materials.Microstructure and worn surface morphologies of the coating were characterized by optical microscopy（OM）,scan electron microscopy（SEM）,X-ray diffraction（XRD）,energy dispersive X-ray analysis（EDS） and atomic force microscopy（AFM）.Wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature.The results indicate that the laser clad coating has a unique microstructure composed of flower-like TiB-TiC eutectic ceramics uniformly distributed in the TiNi-Ti2Ni dual-phase intermetallic matrix.The coating exhibits an excellent wear resistance because of combined action of hard TiB-TiC eutectic ceramic reinforcements and ductile TiNi-Ti2Ni dual-phase intermetallic matrix.展开更多
Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompa...Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompatibility.Nevertheless,in order to obtain the good filling effect,calcium carbonate needs to be surface modified by organic molecules so as to enhance the dispersion and compatibility within the composites.This review paper systematically introduces the theory,methods,and applications progress of calcium carbonate with surface modification.Additionally,the key factors that affect the properties of the composites as well as the current difficulties and challenges are highlighted.The current research progress and potential application prospects of calcium carbonate in the fields of plastics,rubber,paper,medicine and environmental protection are discussed as well.Generally,this review can provide valuable reference for the modification and comprehensive utilization of calcium carbonate.展开更多
Cu/Al laminar composite was prepared by dipping Zn layer and then electroplating Cu thick layer on pure Al sheet.During annealing the Cu/Al composites at temperature from 473 to 673 K, the Cu/Al interfacial diffusion ...Cu/Al laminar composite was prepared by dipping Zn layer and then electroplating Cu thick layer on pure Al sheet.During annealing the Cu/Al composites at temperature from 473 to 673 K, the Cu/Al interfacial diffusion and reaction and itskinetics and also the electrical resistivity of the composites were studied. The results show that no Cu?Al IMC layer is observable asthe composites are annealed at 473 K for time till 360 h, indicating that the Zn intermediate layer can effectively suppress the Cu/Alinterfacial diffusion. However, as the composites are annealed at 573 K and above, Zn atoms in the Zn layer dissolve into the Culayer. Tri-layered reaction product of CuAl2/CuAl/Cu9Al4 then forms from the Al side to the Cu side. The IMC layer follows thediffusion-controlled growth kinetics. Electrical resistivity of the Cu/Al composites increases with the increase of the annealingtemperature and time.展开更多
The paper designed a bionic woven tracheal stent and the stent was a multi-layer tubular structure with a transverse pipeline.Polydioxanone( PDO) monofilament and β-hydroxybutyrate and β-hydroxyvalerate copolymers/p...The paper designed a bionic woven tracheal stent and the stent was a multi-layer tubular structure with a transverse pipeline.Polydioxanone( PDO) monofilament and β-hydroxybutyrate and β-hydroxyvalerate copolymers/polylactic( PHBV/PLA) multifilament were chosen as the tissue engineering tracheal stent materials,and chitosan was chosen as the coating material. This study selected appropriate basic fabric structures and prepared the tracheal stent by setting reasonable weaving parameters,then treated the sample with coating and heat setting. Radical compression performances of the horizontal pipeline and longitudinal pipeline of this tracheal stent were investigated,and the experimental results showed that the stent had good performance on radial supporting force and elastic recovery,which meant it could supply adequate supports for cell growth and tissue regeneration of tracheal lesions; the horizontal pipeline could provide a good experimental foundation for reconstruction of the cartilage ring.展开更多
基金Project (2010CB731705) supported by the National Basic Research Program of China
文摘A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder blends as the precursor materials.Microstructure and worn surface morphologies of the coating were characterized by optical microscopy（OM）,scan electron microscopy（SEM）,X-ray diffraction（XRD）,energy dispersive X-ray analysis（EDS） and atomic force microscopy（AFM）.Wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature.The results indicate that the laser clad coating has a unique microstructure composed of flower-like TiB-TiC eutectic ceramics uniformly distributed in the TiNi-Ti2Ni dual-phase intermetallic matrix.The coating exhibits an excellent wear resistance because of combined action of hard TiB-TiC eutectic ceramic reinforcements and ductile TiNi-Ti2Ni dual-phase intermetallic matrix.
基金Project(AA18242008)supported by the Guangxi Science&Technology Major Project,ChinaProject(HZXYKFKT201904)supported by the Opening Project of Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization,China。
文摘Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompatibility.Nevertheless,in order to obtain the good filling effect,calcium carbonate needs to be surface modified by organic molecules so as to enhance the dispersion and compatibility within the composites.This review paper systematically introduces the theory,methods,and applications progress of calcium carbonate with surface modification.Additionally,the key factors that affect the properties of the composites as well as the current difficulties and challenges are highlighted.The current research progress and potential application prospects of calcium carbonate in the fields of plastics,rubber,paper,medicine and environmental protection are discussed as well.Generally,this review can provide valuable reference for the modification and comprehensive utilization of calcium carbonate.
基金Project(2012QTXM0751)supported by the Scientific and Technological Research Project,State Grid,China
文摘Cu/Al laminar composite was prepared by dipping Zn layer and then electroplating Cu thick layer on pure Al sheet.During annealing the Cu/Al composites at temperature from 473 to 673 K, the Cu/Al interfacial diffusion and reaction and itskinetics and also the electrical resistivity of the composites were studied. The results show that no Cu?Al IMC layer is observable asthe composites are annealed at 473 K for time till 360 h, indicating that the Zn intermediate layer can effectively suppress the Cu/Alinterfacial diffusion. However, as the composites are annealed at 573 K and above, Zn atoms in the Zn layer dissolve into the Culayer. Tri-layered reaction product of CuAl2/CuAl/Cu9Al4 then forms from the Al side to the Cu side. The IMC layer follows thediffusion-controlled growth kinetics. Electrical resistivity of the Cu/Al composites increases with the increase of the annealingtemperature and time.
基金Biomedical Textile Materials Science and Technology(111 Project),China(No.B07024)National Natural Science Foundation of China(No.H0106)Shanghai Pujiang Program,China(No.2015PJC0002)
文摘The paper designed a bionic woven tracheal stent and the stent was a multi-layer tubular structure with a transverse pipeline.Polydioxanone( PDO) monofilament and β-hydroxybutyrate and β-hydroxyvalerate copolymers/polylactic( PHBV/PLA) multifilament were chosen as the tissue engineering tracheal stent materials,and chitosan was chosen as the coating material. This study selected appropriate basic fabric structures and prepared the tracheal stent by setting reasonable weaving parameters,then treated the sample with coating and heat setting. Radical compression performances of the horizontal pipeline and longitudinal pipeline of this tracheal stent were investigated,and the experimental results showed that the stent had good performance on radial supporting force and elastic recovery,which meant it could supply adequate supports for cell growth and tissue regeneration of tracheal lesions; the horizontal pipeline could provide a good experimental foundation for reconstruction of the cartilage ring.
