基于常规物性的减压蜡油烃类组成预测研究

由蜡油的密度、折光率、相对分子质量、硫含量、氢含量等5个常规物性构造成可以表征烃类组成的5个回归因子,利用这5个回归因子及考虑这些因子之间的交互作用所构成的15个回归因子,采用逐步回归的方法建立了预测蜡油详细烃类组成及总环烷烃、多环芳烃组成的回归模型。回归模型统计分析及检验结果表明,所得模型的预测能力较强,可以用于减压蜡油组成的预测。

Chemical Constituents from Starfish Asterias rollestoni

Aim To investigate novel bioactive and structural metabolites from marineorganisms. Methods Column chromatography in association with semi-preparative HPLC were used for theisolation of compounds. 1D and 2D NMR, IR, UV, and MS were employed for structure elucidation.Results From the butanol fraction of the 95% EtOH extract of the starfish Asterias rollestoni, a newcompound N^7 -2'-deoxypseudoxanthosine (1), along with sixteen known compounds, 2'-0-methyl-inosine(2), 2'-deoxyinosine (3), 2'-0-methylguanosine (4), inosine (5); thymine (6), uracil (7), thymidine(8), deoxyuridine (9), 2'-0-methyluridine (10), ( ― )-(1S, 3S)-1-methyl-1, 2, 3,4-terrahydro-β-carboline-3-carboxyl-ic acid (11), ( ― )-(1R, 3S)-1-methyl-1, 2, 3,4-tetrahydro-β-carboline-3-carboxylic acid (12) , ( ― )-(3S)- 1, 2, 3,4-tetrahydro-β-carboline-3-carboxylic acid (13), L-tryptophan (14), L-phenylalanine (15), 3-carboxyindole (16), and p-hydroxybenzoic acid (17) , have been isolated. Conclusion Compound 1 is a newnatural product, and compounds 8, 9 and 10 are isolated from natural sources for the first time, andthe known compounds except 14 and 15 are first reported from starfish Asterias rollestoni.

A first-principle calculation of structural,mechanical and electronic properties of titanium borides

The first-principle calculations are performed to investigate the structural,mechanical and electronic properties of titanium borides （Ti2B,TiB and TiB2）.Those calculated lattice parameters are in good agreement with the experimental data and previous theoretical values.All these borides are found to be mechanically stable at ambient pressure.Compared with parent metal Ti （120 GPa）,the larger bulk modulus of these borides increase successively with the increase of the boron content in three borides,which may be due to direction bonding introduced by the boron atoms in the lattice and the strong covalent Ti-B bonds.Additionally,TiB can be regarded as a candidate of incompressible and hard material besides TiB2.Furthermore,the elastic anisotropy and Debye temperatures are also discussed by investigating the elastic constants and moduli.Electronic density of states and atomic Mulliken charges analysis show that chemical bonding in these titanium borides is a complex mixture of covalent,ionic,and metallic characters.

催化裂化装置使用LCS—7B催化剂总结

随着催化裂化技术的发展,开发重质原料资源,降低原料成本,提高炼厂经济效益,将越来越为人们所重视,而合适的催化剂将是提高装置经济效益的关键因素。分析、总结了LCS—7B催化剂的抗磨性能、消耗量、裂解能力、抗重金属污染能力以及对产品选择性和产品质量的影响,为以后选用催化剂提供一些参考。

Evaluation of Soil Fertility Under Different Cupressus chengiana Forests Using Multivariate Approach

The distribution and growing conditions of Cupressus chengiana forests along with the physical and chemical properties of soils in Northwest Sichuan were studied in 2002 to investigate the conditions and characteristics of soil fertility of C. chengiana and to compare and investigate differences of soil fertility for six C. chengiana populations and their relationships with vegetation, climate and disturbance. The results of the study at 0-20 cm soil depth showed that 1) significant differences (P < 0.05) existed among populations for soil bulk density, soil total porosity, capillary porosity, maximum water-holding capacity, capillary water-holding capacity and topsoil natural water content; 2) chemical characteristics of soil organic matter, total N, total P, alkali-hydrolyzable N, available P, available K and cation exchange capacity were significantly different among the populations; and 3) based on the significant effect of soil fertility factors on forest growth, soil physical and chemical characteristics could be selected as an integrated fertility index (IFI) for evaluation of different C. chengiana populations. Principal component and cluster analyses showed significant differences probably due to the difference of vegetation conditions, management measurements, human-induced disturbances and environmental factors. In order to protect the soil ecological functions in fragile ecological regions, C. chengiana could be used in programs enclosing the hill for natural afforestation, natural forest protection programs, and programs replacing agriculture with afforestation measures.

Effects of surface physicochemical properties on NH_3-SCR activity of MnO_2 catalysts with different crystal structures

α‐,β‐,δ‐,andγ‐MnO2nanocrystals are successfully prepared.We then evaluated the NH3selective catalytic reduction(SCR)performance of the MnO2catalysts with different phases.The NOx conversion efficiency decreased in the order:γ‐MnO2>α‐MnO2>δ‐MnO2>β‐MnO2.The NOx conversion with the use ofγ‐MnO2andα‐MnO2catalysts reached90%in the temperature range of140–200°C,while that based onβ‐MnO2reached only40%at200°C.Theγ‐MnO2andα‐MnO2nanowire crystal morphologies enabled good dispersion of the catalysts and resulted in a relatively high specific surface area.We found thatγ‐MnO2andα‐MnO2possessed stronger reducing abilities and more and stronger acidic sites than the other catalysts.In addition,more chemisorbed oxygen existed on the surface of theγ‐MnO2andα‐MnO2catalysts.Theγ‐MnO2andα‐MnO2catalysts showed excellent performance in the low‐temperature SCR of NO to N2with NH3.

Cemented backfill technology based on phosphorous gypsum

Physical-chemical properties of phosphorous gypsum, proportion and cemented mechanism of slurry with gypsum as aggregate were studied to remove the harms of gypsum pile, combining with difficult problems of excessive mined-out gobs, enormous ore body under roadway and low recovery ratio of Yongshaba Mine, Kaiyang Phosphor Mine Group, Guizhou Province, China. An appropriate backfill system and craflwork were designed, using shattering milling method to crush gypsum, double-axles mixing and strong activation mixing way to mix slurry, cemented slurry and mullock backfill alternately process. The results show that gypsum is fit for backfilling afterwards by adding fly ash, though it is not an ideal aggregate for fine granule and coagulate retardation. The suggested dosage （the mass ratio of cement to fly ash to gypsum） is 1：1：6-1：1：8 with mass fraction of solid materials 60%-63%. Slurry is transported in suspend state with non-plastic strength, and then in concretion state after backfilling. The application to mine shows the technology is feasible, and gypsum utilization ratio is up to 100%. Transportation and backfill effect is very good for paste-like slurry and drenching cemented slurry into mullock, and the compressive strength and recovery ratio are 2.0 MPa and 82.6%, respectively, with the maximum subsidence of surface only 1.307 mm. Furthermore, the investment of system is about 7 × 10^6 yuan （RMB）, only 1/10 of that of traditional paste backfill system.

Physicochemical properties of 1,3-dimethyl-2-imidazolinone−ZnCl_(2)solvated ionic liquid and its application in zinc electrodeposition

Zinc chloride(ZnCl_(2))was dissolved in the 1,3-dimethyl-2-imidazolinone(DMI)solvent,and the metallic zinc coatings were obtained by electrodeposition in room-temperature ambient air.The conductivity(σ),viscosity(η),and density(ρ)of the DMI−ZnCl_(2)solvated ionic liquid at various temperatures(T)were measured and fitted.Furthermore,cyclic voltammetry was used to study the electrochemical behavior of Zn(II)in the DMI−ZnCl_(2)solvated ionic liquid,indicating that the reduction of Zn(II)on the tungsten electrode was a one-step two-electron transfer irreversible process.XRD and SEM−EDS analysis of the cathode product confirmed that the deposited coating was metallic zinc.Finally,the effects of deposition potential,temperature and duration on the morphology of zinc coatings were investigated.The results showed that a dense and uniform zinc coating was obtained by potentiostatic electrodeposition at−2 V(vs Pt)and 353 K for 1 h.

Stndy on Soil Magnetic Effect

A study on the effect of applied magnetic field was performed with six types of soils collected fromnortheastern China. Magnetic field was found to cause changes of soil physicc-chemical properties and soilenzyme activities. An appropriate applied magnetic field could cut down soil zeta-potential, soil specificsurface, soil water potential and soil swelling capacity; raise the charge density on soil colloids and theactivities of invertase, hydrogen peroxidase and amylase in the soils; enhance soil aggregation and improvesoil structural status and soil water-releasing capability.

Physicochemical properties of DMI-LiNO_(3) solvated ionic liquid and its application in electrodeposition of neodymium at room temperature

The density,conductivity,and viscosity of the 1,3-dimethyl-2-imidazolinone and lithium nitrate(DMILiNO_(3))solvated ionic liquid were measured as a function of temperature.Additionally,the electrochemical mechanism and electrodeposition of neodymium from the DMI-LiNO_(3) solvated ionic liquid were investigated.Cyclic voltammetry results indicate that the electrochemical reduction of Nd(Ⅲ)is irreversible and proceeds via one-step with three-electron transfer,which is controlled by diffusion with a diffusion coefficient of 5.08×10^(-8) cm^(2)/s.Energydispersive X-ray spectrometry and X-ray photoelectron spectroscopy data confirm that the electrodeposit obtained after electrodeposition at-4 V(vs Ag)using the DMI-LiNO_(3)-Nd(CF_(3)SO_(3))_(3) solvated ionic liquid contains metallic neodymium.

Physico-Chemical Properties and Enzyme Activities of the Arable Soils in Lhasa,Tibet,China

An understanding of the physical,chemical,and biological properties of a soil provides a basis for soil use and management.This paper reports the major physico-chemical properties and enzyme activities of the soils of Lhasa's main arable lands and the factors that influence these soil properties.Composite and core samples were taken from the three main arable soil types(alluvial soil,subalpine arable steppe soil,and subalpine arable meadow soil) and were analysed using standard methods.The bulk density and the ventilation porosity ratio of the soils were close to the recommended values for arable lands,and the dominant soil texture was sandy.The soil moisture release rates were arable steppe soil > alluvial soil > arable meadow soil.Soil organic matter content,Cation-Exchange Capacity(CEC),total and available nitrogen content,and catalase activity of the arable meadow soil were higher than those of the alluvial and the arable steppe soils,while soil pH in the arable meadow was lower.Most of the measured properties did not show a significant variance among these three soils.However,the measured indices(apart from the total potassium) indicate that there are notable differences among the three types of soil.The results implied that the utilisation patterns of the arable soil or human activities,such as tillage practices and fertiliser applications,have a substantialeffect on the soil properties in this region.Our results suggest that the cultivation practices in the region have apparently positive impact on the soil organic matter,nutrient contents and bulk density probably due to the sound fertiliser management such as the applications of farmyard manure and chemical fertilisers.However,intense cultivation practices lowered the activity of most soil enzymes.The results demonstrate that the choice of soil management strategy had a significant impact on the soil physicochemical and biological properties in the region studied.

Synthesis and physico-chemical properties of new green electrolyte 1-butyl-3-methylimidazolium perchlorate

1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid.

Synthesis of ZSM-5/MOR Co-crystalline Zeolite without Template and the Catalytic Application Thereof

A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeolite synthesized with a template. Analytical results indicated that they were similar in structure and composition. The influences ofpH value and Si/Al ratio on synthesis were studied. It was found that a high pH value or a low Si/AI ratio could provide better environment for mordenite （MOR） crystallization. The zeolites applied as catalysts in naphtha catalytic cracking for producing ethylene and propylene showed outstanding catalytic performance with the total yield of ethylene and propylene reaching 55 m%. The process could achieve most favorable efficiency when the catalyst contained 5 m% of MOR.

Property changes of anchor grout calcined ginger nuts admixed with fly ash and quartz sand after accelerated ageing tests

Calcined ginger nuts admixed by fly ash and quartz sand (CGN-(F+S)) has been validated to be basically compatible to earthen sites as an anchor grout. Accelerated ageing tests including water stability test, temperature and humidity cycling test, soundness test and alkali resistance test are conducted with the objective to further research the property changes of CGN-(F+S) grout. Density, surface hardness, water penetration capacity, water permeability capacity, soluble salt, scanning electron microscopy (SEM) images and energy dispersive spectrometry (EDS) spectrum of these samples have been tested after accelerated ageing tests. The results show that densities of samples decrease, surface hardness, water penetration capacity and water permeability capacity of samples increase generally. Besides, soluble salt analysis, SEM and EDS results well corroborate the changes. Based on the results it can be concluded that property changes are most serious after temperature and humidity cycling test, followed by water stability, soundness and alkali resistance test in sequence. But in general, CGN-(F+S) still has good durability.

Effect of magma intrusion on the occurrence of coal gas in the Wolonghu coalfield

Chemical analysis, methane isothermal adsorption studies, and mercury porosimetry were performed on ten samples taken from the magma intrusion boundary in the Wolonghu coalfield. The physico-chemical properties of coals from the magma intrusion region are compared to those from the normal regions. The results show that the volatile content (Vad), the limiting adsorption constant (a), and the initial methane diffusion rate of samples from the magma intrusion region are generally smaller than those values from samples from the normal region. The number three coal sample from the magma intrusion region has a large vitrinite reflectance, well developed macropores, a small surface area, and weak methane adsorp- tion capacity. The number ten coal sample from the normal region has a small vitrinite reflectance, well developed micropores, a large surface area, and a strong methane adsorption capacity. The maceral of the coal samples from the magma intrusion region and the normal region are similar. The coal in the area near the magma intrusion boundary is rich in methane and is an area where coal and gas outbursts often occur.

Physicochemical properties and heavy metals leachability of fly ash from coal-fired power plant

The physicochemical properties of fly ash from two kinds of coal-fired power plants were studied. Three aspects were examined： the micro-morphology, the mineral composition and the content of heavy metals. The results show that the fly ash from plants using a circulating fluidized bed are more irregular par- ticles, while the particles from the plants using a pulverized coal-fired boiler are mainly spherical in shape. Quartz and mullite are the main crystalline phases in the ash. Clearly, both the technology and the coal used by a power plant can influence the mineral composition of the ash. The mineral composition of fly ash from a circulating fiuidized bed is more complex than that from a pulverized coal-fired boiler. The quantity of elements found in the fly ash is greater than that found in the bottom ash for the same plant. Heavy metals are likely to be enriched in the fly ash. Heavy metal leachability was studied using two leaching methods. The results indicate that most of the heavy metals that leached during either batch leaching or column leaching experiments did not exceed the related maximum concentration standards. But Ni concentrations in the leachates from both batch and column tests exceed the standard. The highest excess rates in both tests were 572~ and 497~, which levels might threaten the environment.

Root Structure,Distribution and Biomass in Five Multipurpose Tree Species of Western Himalayas

【Title】【Author】【Addresses】1The tree root distribution pattern and biomass of seventeen year old trees of Grewia optiva, Morus alba, Celtis australis, Bauhinia variegata and Robinia pseudoacacia were studied by excavation method. B. variegata roots penetrated to a maximum depth of 4.78 m, whereas, M. alba roots were found down to 1.48 m depth. Lateral spread was minimum in B. variegata （1.10 m）and maximum inR. pseudoacacia （7.33 m）. Maximum root biomass of 6.30 kg was found in R. pseudoacacia and minimum （2.43 kg） was found in M. alba. For four species viz.,G. optiva, M. alba, C. australis andR. pseudoacacia, 68%-87% root biomass occurred within top 0-30 cm soil depth, but forB. variegata this was only45%. The soil binding factor was maximum in G. optiva and minimum in B. variegata. Soil physico-chemical properties also showed wide variation. The study suggests thatB. variegata with a deep root system is the most suitable species for plantation under agroforestry systems. R. pseudoacacia and G. optiva with deep root systems, more lateral spread and high soil binding factor are suitable for plantation on degraded lands for soil conservation.

Leaf choice in black-and-white snub-nosed monkeys Rhinopithecus bieti is related to the physical and chemical properties of leaves

To understand the effects of the chemical and physical properties of plant leaves on food choice in Rhinopithecus bieti, we collected mature leaves of nine food and five non-food plant species at the southernmost part of the species＇s range. Chemical properties such as fat, ash, crude protein （CP）, total phenolics （TP）, and fiber content including neutral detergent fiber （NDF）, acid detergent fiber （ADF）, lignin, celluloses and hemicelluloses, and physical toughness were measured. R. bieti tended to choose leaves with lower fiber content, higher ash, a higher ratio of CP/ADF, and lower toughness. No difference was found for fat, crude protein, total phenolics, hemicelluloses and lignin between food and non-food leaves. Even though the ratio of CP/ADF is generally regarded as a good indicator for colobine food choice, the difference in the ratio of CP/ADF between food and non-food leaves was only the result of differences in ADE Since positive correlations were found between ADF and tough- ness from all leaves （both food and non-food species）, and toughness of leaves was likely easier for R. bieti to sense than fiber content via mastication, the toughness of leaves may function as a predictor of food choice in this species [Current Zoology 56 （6） 643-49, 2010].

STUDY ON THE SYNTHESIS AND PHYSICOCHEMICAL PROPERTIES OF SUCROSE POLYESTER

Orthogonal test was used to evaluate the effects of synthetic such as temperature （120-140 ℃）, reaction time （4-6） and substrate molar ratio of methyl oleate to sucrose （8：1-12：1） on the percent quantity conversion to sucrose polyester. Sucrose polyester was synthesized by a solvent-free one-stage interesterification. The optimum reaction conditions are as follows： methyl oleate/sucrose =10： 1 （mol/mol）; reaction temperature is 140 ℃; reaction time is 5 hours. The product yield reaches 88.15%, and the degree of esterification （DE） is over 7 in the conditions. Thin layer chromatography （TLC）, column chromatography （CC）, High-performance liquid chromatography （HPLC） were used to analyze the product, the results show that the percent of sucrose polyoleate is over 70% in the product. The physicochemical properties of sucrose polyesters were compared with cooking oil. The results show that the qualities of sucrose polyesters are all up to the triglyceride.

Mechanistic study on the cellulose dissolution in ionic liquids by density functional theory

Ionic liquids （ILs） have attracted many attentions in the dissolution of cellulose due to their unique physicochemical properties as green solvents. However, the mechanism of dissolution is still under debate. In this work, computational investigation for the mechanisms of dissolution of cellulose in [Bmim]Cl, [Emim]C1 and [Emim]OAc ILs was performed, and it was focused on the process of breakage of cellulose chain and ring opening using cellobiose as a model molecule. The detailed mechanism and reaction energy barriers were computed for various possible pathways by density functional theoretical method. The key finding was that 1Ls catalyze the dissolution process by synergistic effect of anion and cation, which led to the cleavage of cellulose chain and formation of derivatives of cellulose. The investigation on ring opening process ofcellobiose suggested that carbene formed in ILs played an important role in the side reaction of cellulose, and it facilitated the formation of a covalent bond between cellulose and imidazolium core. These computation results may provide new perspective to understand and apply ILs for pretreatment of cellulose.