生物炭对土体物理化学性质影响的研究进展

研究表明,生物炭在土体改良、污染土修复和碳封存等方面具有广泛前景.回顾了近些年国内外生物炭对土体性质改良的相关研究,系统分析和总结了生物炭的基本性质、对土体物理化学性质的影响及影响改良效果的主要因素,可得如下结论.1)生物炭一般具有低密度、高比表面积、高pH、高CEC、高稳定性等特点,但这些性质会随着生物质来源和制备条件的不同而存在差异,影响改良效果;2)生物炭加入土体中,可以改变土体的物理性质,如土体密度、孔隙结构、孔径分布、持水性和力学性质,进而影响土体硬度、持水能力和团聚体稳定性等;3)生物炭加入土体后会影响土体的化学性质,如土体酸碱性、阳离子交换量、离子交换位点、负电荷浓度,进而影响土体固化、污染物修复效果及土体可利用性等;4)生物炭对土体的改良效果易受土体类型、生物炭添加量及粒径等的影响.

A first-principle calculation of structural,mechanical and electronic properties of titanium borides

The first-principle calculations are performed to investigate the structural,mechanical and electronic properties of titanium borides （Ti2B,TiB and TiB2）.Those calculated lattice parameters are in good agreement with the experimental data and previous theoretical values.All these borides are found to be mechanically stable at ambient pressure.Compared with parent metal Ti （120 GPa）,the larger bulk modulus of these borides increase successively with the increase of the boron content in three borides,which may be due to direction bonding introduced by the boron atoms in the lattice and the strong covalent Ti-B bonds.Additionally,TiB can be regarded as a candidate of incompressible and hard material besides TiB2.Furthermore,the elastic anisotropy and Debye temperatures are also discussed by investigating the elastic constants and moduli.Electronic density of states and atomic Mulliken charges analysis show that chemical bonding in these titanium borides is a complex mixture of covalent,ionic,and metallic characters.

Effects of surface physicochemical properties on NH_3-SCR activity of MnO_2 catalysts with different crystal structures

α‐,β‐,δ‐,andγ‐MnO2nanocrystals are successfully prepared.We then evaluated the NH3selective catalytic reduction(SCR)performance of the MnO2catalysts with different phases.The NOx conversion efficiency decreased in the order:γ‐MnO2>α‐MnO2>δ‐MnO2>β‐MnO2.The NOx conversion with the use ofγ‐MnO2andα‐MnO2catalysts reached90%in the temperature range of140–200°C,while that based onβ‐MnO2reached only40%at200°C.Theγ‐MnO2andα‐MnO2nanowire crystal morphologies enabled good dispersion of the catalysts and resulted in a relatively high specific surface area.We found thatγ‐MnO2andα‐MnO2possessed stronger reducing abilities and more and stronger acidic sites than the other catalysts.In addition,more chemisorbed oxygen existed on the surface of theγ‐MnO2andα‐MnO2catalysts.Theγ‐MnO2andα‐MnO2catalysts showed excellent performance in the low‐temperature SCR of NO to N2with NH3.

Physicochemical properties of 1,3-dimethyl-2-imidazolinone−ZnCl_(2)solvated ionic liquid and its application in zinc electrodeposition

Zinc chloride(ZnCl_(2))was dissolved in the 1,3-dimethyl-2-imidazolinone(DMI)solvent,and the metallic zinc coatings were obtained by electrodeposition in room-temperature ambient air.The conductivity(σ),viscosity(η),and density(ρ)of the DMI−ZnCl_(2)solvated ionic liquid at various temperatures(T)were measured and fitted.Furthermore,cyclic voltammetry was used to study the electrochemical behavior of Zn(II)in the DMI−ZnCl_(2)solvated ionic liquid,indicating that the reduction of Zn(II)on the tungsten electrode was a one-step two-electron transfer irreversible process.XRD and SEM−EDS analysis of the cathode product confirmed that the deposited coating was metallic zinc.Finally,the effects of deposition potential,temperature and duration on the morphology of zinc coatings were investigated.The results showed that a dense and uniform zinc coating was obtained by potentiostatic electrodeposition at−2 V(vs Pt)and 353 K for 1 h.

Physicochemical properties of DMI-LiNO_(3) solvated ionic liquid and its application in electrodeposition of neodymium at room temperature

The density,conductivity,and viscosity of the 1,3-dimethyl-2-imidazolinone and lithium nitrate(DMILiNO_(3))solvated ionic liquid were measured as a function of temperature.Additionally,the electrochemical mechanism and electrodeposition of neodymium from the DMI-LiNO_(3) solvated ionic liquid were investigated.Cyclic voltammetry results indicate that the electrochemical reduction of Nd(Ⅲ)is irreversible and proceeds via one-step with three-electron transfer,which is controlled by diffusion with a diffusion coefficient of 5.08×10^(-8) cm^(2)/s.Energydispersive X-ray spectrometry and X-ray photoelectron spectroscopy data confirm that the electrodeposit obtained after electrodeposition at-4 V(vs Ag)using the DMI-LiNO_(3)-Nd(CF_(3)SO_(3))_(3) solvated ionic liquid contains metallic neodymium.

Physico-Chemical Properties and Enzyme Activities of the Arable Soils in Lhasa,Tibet,China

An understanding of the physical,chemical,and biological properties of a soil provides a basis for soil use and management.This paper reports the major physico-chemical properties and enzyme activities of the soils of Lhasa's main arable lands and the factors that influence these soil properties.Composite and core samples were taken from the three main arable soil types(alluvial soil,subalpine arable steppe soil,and subalpine arable meadow soil) and were analysed using standard methods.The bulk density and the ventilation porosity ratio of the soils were close to the recommended values for arable lands,and the dominant soil texture was sandy.The soil moisture release rates were arable steppe soil > alluvial soil > arable meadow soil.Soil organic matter content,Cation-Exchange Capacity(CEC),total and available nitrogen content,and catalase activity of the arable meadow soil were higher than those of the alluvial and the arable steppe soils,while soil pH in the arable meadow was lower.Most of the measured properties did not show a significant variance among these three soils.However,the measured indices(apart from the total potassium) indicate that there are notable differences among the three types of soil.The results implied that the utilisation patterns of the arable soil or human activities,such as tillage practices and fertiliser applications,have a substantialeffect on the soil properties in this region.Our results suggest that the cultivation practices in the region have apparently positive impact on the soil organic matter,nutrient contents and bulk density probably due to the sound fertiliser management such as the applications of farmyard manure and chemical fertilisers.However,intense cultivation practices lowered the activity of most soil enzymes.The results demonstrate that the choice of soil management strategy had a significant impact on the soil physicochemical and biological properties in the region studied.

Synthesis and physico-chemical properties of new green electrolyte 1-butyl-3-methylimidazolium perchlorate

1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid.

Synthesis of ZSM-5/MOR Co-crystalline Zeolite without Template and the Catalytic Application Thereof

A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeolite synthesized with a template. Analytical results indicated that they were similar in structure and composition. The influences ofpH value and Si/Al ratio on synthesis were studied. It was found that a high pH value or a low Si/AI ratio could provide better environment for mordenite （MOR） crystallization. The zeolites applied as catalysts in naphtha catalytic cracking for producing ethylene and propylene showed outstanding catalytic performance with the total yield of ethylene and propylene reaching 55 m%. The process could achieve most favorable efficiency when the catalyst contained 5 m% of MOR.

Physicochemical properties and heavy metals leachability of fly ash from coal-fired power plant

The physicochemical properties of fly ash from two kinds of coal-fired power plants were studied. Three aspects were examined： the micro-morphology, the mineral composition and the content of heavy metals. The results show that the fly ash from plants using a circulating fluidized bed are more irregular par- ticles, while the particles from the plants using a pulverized coal-fired boiler are mainly spherical in shape. Quartz and mullite are the main crystalline phases in the ash. Clearly, both the technology and the coal used by a power plant can influence the mineral composition of the ash. The mineral composition of fly ash from a circulating fiuidized bed is more complex than that from a pulverized coal-fired boiler. The quantity of elements found in the fly ash is greater than that found in the bottom ash for the same plant. Heavy metals are likely to be enriched in the fly ash. Heavy metal leachability was studied using two leaching methods. The results indicate that most of the heavy metals that leached during either batch leaching or column leaching experiments did not exceed the related maximum concentration standards. But Ni concentrations in the leachates from both batch and column tests exceed the standard. The highest excess rates in both tests were 572~ and 497~, which levels might threaten the environment.

Leaf choice in black-and-white snub-nosed monkeys Rhinopithecus bieti is related to the physical and chemical properties of leaves

To understand the effects of the chemical and physical properties of plant leaves on food choice in Rhinopithecus bieti, we collected mature leaves of nine food and five non-food plant species at the southernmost part of the species＇s range. Chemical properties such as fat, ash, crude protein （CP）, total phenolics （TP）, and fiber content including neutral detergent fiber （NDF）, acid detergent fiber （ADF）, lignin, celluloses and hemicelluloses, and physical toughness were measured. R. bieti tended to choose leaves with lower fiber content, higher ash, a higher ratio of CP/ADF, and lower toughness. No difference was found for fat, crude protein, total phenolics, hemicelluloses and lignin between food and non-food leaves. Even though the ratio of CP/ADF is generally regarded as a good indicator for colobine food choice, the difference in the ratio of CP/ADF between food and non-food leaves was only the result of differences in ADE Since positive correlations were found between ADF and tough- ness from all leaves （both food and non-food species）, and toughness of leaves was likely easier for R. bieti to sense than fiber content via mastication, the toughness of leaves may function as a predictor of food choice in this species [Current Zoology 56 （6） 643-49, 2010].

Characterization of Some Typical Soils of the Miombo Woodland Ecosystem of Kitonga Forest Reserve, Iringa, Tanzania： Physico-Chemical Properties and Classification

Despite the fact that miombo woodland soils have significant implications in global climate change processes, few studies have been done to characterize and classify the soils of the miombo woodland ecosystem of Tanzania. The current study was carried out to map and classify soils of Kitonga Forest Reserve, which is a typical miombo woodland ecosystem, in order to generate relevant information for their use and management. A representative study area of 52 km2 was selected and mapped at a scale of 1：50,000 on the basis of relief. Ten representative soil profiles were excavated and described using standard methods. Soil samples were taken from genetic soil horizons and analyzed in the laboratory for physico-chemical characteristics using standard methods. Using field and laboratory analytical data, the soils were classified according to the FAO-World Reference Base （FAO-WRB） for Soil Resources system as Cambisols, Leptosols and Fluvisols. In the USDA-NRCS Soil Taxonomy system the soils were classified as Inceptisols and Entisols. Topographical features played an important role in soil formation. The different soil types differed in physico-chemical properties, hence exhibit differences in their potentials, constraints and need specific management strategies. Texture varied from sandy to different loams; pH from 5.1 to 5.9; organic carbon from 0.9 g/kg to 20 g/kg; and CEC from 3 cmol/（＋）kg to 24 cmol/（＋）kg. Sustainable management of miombo woodlands ecosystem soils requires reduced deforestation and reduced land degradation.

Heterogeneity of Physico-Chemical Properties in Structured Soils and Its Consequences

Structured soils are characterized by the presence of inter- and intra-aggregate pore systems and aggregates, which show varying chemical, physical, and biological properties depending on the aggregate type and land use system. How far these aspects also affect the ion exchange processes and to what extent the interaction between the carbon distribution and kind of organic substances affect the internal soil strength as well as hydraulic properties like wettability are still under discussion. Thus, the objective of this research was to clarify the effect of soil aggregation on physical and chemical properties of structured soils at two scales: homogenized material and single aggregates. Data obtained by sequentially peeling off soil aggregates layers revealed gradients in the chemical composition from the aggregate surface to the aggregate core. In aggregates from long term untreated forest soils we found lower amounts of carbon in the external layer, while in arable soils the differentiation was not pronounced. However, soil aggregates originating from these sites exhibited a higher concentration of microbial activity in the outer aggregate layer and declined towards the interior. Furthermore, soil depth and the vegetation type affected the wettability. Aggregate strength depended on water suction and differences in tillage treatments.

Paddy Soil Stability and Mechanical Properties as Affected by Long-Term Application of Chemical Fertilizer and Animal Manure in Subtropical China

Wet stability, penetration resistance （PR）, and tensile strength （TS） of paddy soils under a fertilization experiment for 22 years were determined to elucidate the function of soil organic matter in paddy soil stabilization. The treatments included no fertilization （CK）, normal chemical fertilization （NPK）, double the NPK application rates （2NPK）, and NPK mixed with organic manure （NPK＋OM）. Compared with CK, Fertilization increased soil organic carbon （SOC） and soil porosity. The results of soil aggregate fragmentation degree （SAFD） showed that fast wetting by water was the key fragmentation mechanism. Among the treatments, the NPK＋OM treatment had the largest size of water-stable aggregates and greatest normal mean weight diameter （NMWD） （P ≤ 0.05）, but the lowest PR and TS in both cultivated horizon （Ap） and plow pan. The CK and 2NPK treatments were measured with PR 〉 2.0 MPa and friability index 〈 0.20, respectively, in the Ap horizon, suggesting that the soils was mechanically unfavourable to root growth and tillage. In the plow pan, the fertilization treatments had greater TS and PR than in CK. TS and PR of the tested soil aggregates were negatively correlated to SOC content and soil porosity. This study suggested that chemical fertilization could cause deterioration of mechanical properties while application of organic manure could improve soil stability and mechanical properties.

STUDY ON THE PHYSICAL CHEMICALPROPERTIES OF FFA-1 ION EXCHANGE FIBER

The physical and chemical properties of FFA-1 ion exchange fiber have beencharacterized with IR spectrum. thermal analysis and SEM means. The PH titrationcurve, swelling rate, mechanical properties, resistance drop of filter layer as well asthe dynamic adsorption for SO2 was determined These experiments provided theessential parameters for the practical application of FFA-1 material in adsorption oftoxic gases.

Physical Properties and Electrochemical Performance of Solid K_2FeO_4 Samples Prepared by Ex-situ and in-situ Electrochemical Methods

K2FeO4 powders were synthesized by the ex-situ and in-situ electrochemical methods, respectively, and characterized by infrared spectrum （IR）, scanning electron microscopy （SEM）, X-ray powder diffraction （XRD） and BET. Their electrochemical performances were investigated by means of galvanostatic discharge and electrochemi-cal impedance spectroscopy （EIS）. The results of physical characterization showed that the two samples have simi-lar structural features, but their surface morphologies and oriented growth of the crystals are different, which results in smaller specific surface area and lower solubility of the ex-situ electrosynthesized K2FeO4 sample. The results of discharge experiments indicated that the ex-situ electrosythesized K2FeO4 electrode has much larger discharge ca-pacity and lower electrode polarization than the in-situ electrosynthesized K2FeO4 electrode. It was found from the results of EIS that lower electrochemical polarization might be responsible for the improvement on the discharge performance of the ex-situ electrosynthesized K2FeO4 electrode.

Effect of Gluten-Free Flours on Physical Properties of Cakes

In this study, the effect of lupin flour （LF） and whole buckwheat flour （BF） on the physical properties of gluten-free cake was studied. LF up to 40% and BF flour up to 20% level were partially replaced with corn starch and rice flour mix in the gluten free cake recipe. Cake dough properties （specific gravity and pH）, cake properties （weight, volume, symmetry and uniformity index, hardness）, crust and crumb color values were investigated. High addition levels of LF decreased the pH values of the dough. Compared to control, volume index of the cakes improved with BF at 5% addition level or LF up to 20% level. While minimum level of the LF/BF gave softer cake texture, high substitution levels of LF （30%-40%） and BF （15%-20%） had detrimental effect on softness of the samples. All addition level of the LF increased the darkness and yellowness of the cake＇s crust and crumb, whereas BF above 5% level decreased lightness and yellowness of the samples. The high levels of LF （30%-40%） and BF （15%-20%） had reducing effect all physical properties of gluten-free cake samples.

Theoretical Studies on the Fe-M Interactions and 31p NMR in Fe（CO）3（EtPhPpy）2MX2 （X=NCS, SCN, CI; M=Zn, Cd, Hg）

To study the Fe-M interactions and their effects on 31p NMR, the structures of Fe（CO）3（EtPhPpy）2 1, Fe（CO）3（EtPhPpy）2M（NCS）2 （2： M=Zn, 3： M=Cd, 4： M=Hg） and Fe（CO）3（EtPhPpy）2CdX2 （5： X=C1, 6： X=SCN） were investigated by density functional theory （DFT） PBE0 method. The stabilities S of complexes follow S（2）〉S（3）〉S（4） and S（3）,.~S（6）〉S（5）, indicating that 6 is stable and may be synthesized. The complexes with thiocyanate are more stable than that with chloride in Fe（CO）3（EtPhPpy）2CdX2. The strength I of Fe-M interactions follows I（2）≈I（3）〈I（4）. The Fe-Cd interactions of 3 and 6, which contain thiocyanate, are stronger than that of 5 with chloride. The charge-transfer, which enhances with the increasing of Fe-M interaction strength, comes from Et, Ph, py, CO groups towards P, Fe, and M atoms. Because the delocalization of thiocyanate disperses the charge of M2＋, the charge-transfer of the complexes with thiocyanate is stronger than that with chloride. There is a a-bond between Fe and Hg atoms in 4. However, in binuclear complexes except 4, the Fe-M interactions act as nFe→nM, σP-Fe→nM and σC-Fe→nM delocalization, and the N-M interactions mainly act as nN→nM delocalization. In binuclear complexes, due to the Fe→M interactions, the strong σFe--C→σ＊Fe--p or σFe-Hg→σ＊Fe--I2 delocalization and the charge-transfer, the electron density on P nucleus is increased, and thus upfield 31p chemical shifts are caused （compared with mononuclear complex 1）.

Characterization of semi-coke generated by coal-based direct reduction process of siderite

Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.

Characterization of Soil Quality Under Vegetable Production Along an Urban-Rural Gradient

Human activity and urbanization result in urban-rural environmental gradients. Understanding effect of the gradients on soil properties is necessary for management of the soils around urban areas. In this study, soil quality of some vegetable fields was characterized along an urban-rural gradient in Shaoxing County, Zhejiang Province. Fifteen soil physical and chemical properties were evaluated by using principal component analysis.Results showed that there was a great variation in the soil quality along the gradient. From rural to urban zones, soil organic matter, water-stable aggregates, cation exchangeable capacity (CEC), total N and P, and available K increased, whereas soil pH value decreased. In addition, Pb, Cu, Ni, Co, Zn and Cr in the soils tended to be accumulated toward the urban zone. Sequential chemical extraction showed that mobility of all the heavy metals in the soils tended to increase from the rural to the urban zones. The variation of soil properties accounted for by the first principal component was significantly explained by the difference in application rates of municipal wastes.

Study the Physical, Chemical, Mineralogical, and Geo-technical Properties of Soils Used in Pottery Industries, Kurdistan-lraq

The study area is located in Duhok and Sulaimania province in Kurdistan region, lraq. Study soils developed from parent material that has derived from limestone. Randomize, composed and disturbed surface soil samples were collected. The bulk soils were air dried, crushed and passed through 2 mm sieve. Standard methods were used for chemical, physical, geotechnical and mineralogical analyses of soil samples. The results indicated that the study soils texture were clay to loam clay, this texture was considered as suitable for ceramic and pottery industries as a result of increasing clay contents that ranged between 301 g/kg and 676 g/kg. Soil consistence depending on geotechnical properties increased the ability of study soils for resistance rapture and deformation. Existence the high amount of cementing agents in study soils such as organic matter, iron oxides and particularly total carbonate （247.2-308.8 g/kg） act to reduce the bad effect of the smectite minerals group （high shrinkage） in soils of study locations through increasing the resistance of these soils for rupture and deformation. The existing of Kaolinite, palygorskite and chlorite allows clay to be dried in ceramic and pottery industries without cracking from shrinkage. Study soils were different in their colors as a result of existence, different pigmentation materials that led to coloring soils with different colors in turn caused coloring of pottery and ceramic materials. Since, there are no available academic studies or researches about this subject in Kurdistan region in addition the clay pottery and ceramic sector still has a good market at the same time using this type of soils for arts, therefore, this study was conducted.