用时序参数诊断频域变化

频域分析是各种动态信号处理的重要内容。本文基于Fourier分析和时序分析的极大熵谱估计理论,提出一种可用于诊断频域特征变化的时域特征参数。该特征参数的主要特点是可利用时域信息来快速反映频域特征的变化,且计算简单,运算速度快,适于在线诊断频域特征变化的均合。理论和实验证明该特征参数的理论和方法是合理的。

Seasonal variation of tidal prism and energy in the Changjiang River estuary： a numerical study

Tidal rivers are intrinsically complex because tidal propagation is influenced by river discharge. This study aims to examine the seasonal variation of tidal prism and energy variance in the tidal river of the Changjiang(Yangtze) River estuary in China. In order to quantify the behaviour of river and tide,we use numerical modelling that has been validated using measured data. We conduct our analysis by quantifying the discharge and energy variance in separate components for both the river and the tide,during wet and dry seasons. We note various definitions of tidal prism and explore the difference between tidal discharge on the flood and ebb and tidal storage volume. The results show that the river discharge attenuates the tidal motion and reduces the tidal flood discharge but the tidal storage volume is approximately constant with different riverine discharge since part of the fresh water discharge is intercepted and captured in the estuary due to the backwater effect. It appears that the tidal discharge adjusts according to the variation of river discharge to keep a constant tidal storage volume. An analysis of the hydraulics shows that the transition from tidal dominance(at the mouth) to river dominance(upstream) depends on the location of tidal current reversal which varies from wet season to dry season. Duringthe wet season,the Changjiang River estuary is totally dominated by energy from fresh water discharge.

Characteristics of Fin Baffle Packing Used in Rotating Packed Bed

For an alcohol/water system and with fin baffle packing,continuous distillation experiments were carried out in a rotating packed bed(RPB)system at atmospheric pressure.The effects of the average high gravity factor(β),liquid reflux ratio(R)and feedstock flux(F)on the momentum transfer and mass transfer were investigated. The gas phase pressure drop of RPB increased with the average high gravity factor,liquid reflux ratio and feedstock flux,which was 13.55-64.37 Pa atβof 2.01-51.49,R of 1.0-2.5,and F of 8-24 L·h1for a theoretical tray in the RPB with fin baffle packing.The investigation on the mass transfer in the RPB with different packings showed that the number of transfer units of RPB with a packing also increased with the average high gravity factor,reflux ratio and feedstock flux.It is found that the fin baffle packing(packing III)presents the best mass transfer performance and lowest pressure drop for the height equivalent to a theoretical plate(HETP),which is 6.59-9.84 mm.

Oblique Wave Motion over Multiple Submerged Porous Bars near a Vertical Wall

This study examines oblique wave motion over multiple submerged porous bars in front of a vertical wall. Based on linear potential theory, an analytical solution for the present problem is developed using matched eigenfunction expansions. A complex dispersion relation is adopted to describe the wave elevation and energy dissipation over submerged porous bars. In the analytical solution, no limitations on the bar number, bar size, and spacing between adjacent bars are set. The convergence of the analytical solution is satisfactory, and the correctness of the analytical solution is confirmed by an independently developed multi-domain BEM （boundary element method） solution. Numerical examples are presented to examine the reflection and transmission coefficients of porous bars, CR and Cv, respectively, for engineering applications. The calculation results show that when the sum of widths for all the porous bars is fixed, increasing the bar number can significantly improve the sheltering function of the bars. Increasing the bar height can cause more wave energy dissipation and lower CR and Cr. The spacing between adjacent bars and the spacing between the last bar and the vertical wall are the key parameters affecting CR and Ct. The proposed analytical method may be used to analyze the hydrodynamic performance of submerged porous bars in preliminary engineering designs.

The Time-Frequency Energy Attenuation Factor and Its Application on the Basis of Gauss Linear Frequency-Modulated Continuous Wavelet Transform

Based on the Gauss linear frequency modulated wavelet transform, a new characteristic index is presented, namely time frequency energy attenuation factor which can reflect the difference features of waveform in earthquake focus mechanism, wave traveling path and its attenuation characteristics in focal area or near field. In order to test its validity, we select the natural earthquakes and explosion or collapse events whose focus mechanisms vary obviously,and some natural earthquakes located at the same site or in a very small area. The study indicates that the time frequency energy attenuation factors of the natural earthquakes are obviously different with that of explosion or collapse events, and the change of the time frequency energy attenuation factors is relatively stable for the earthquakes under the normal seismicity background. Using the above mentioned method, it is expected to offer a useful criterion for strong earthquake prediction by continuous earthquake observation.

THE STATISTIC ANALYSIS OF SCREEN PARAMETERS ON PERFORMANCE CHARACTERISTICS

A series of laboratory screening tests have been performed with the objective of evalu-ating the effect of feed rate, screen length and screen motion on the quality of separation achieved. The statistic analysis and results derived from it are discussed. Suggestions for future work with the objective of assessing the industrial significance of the research to the optimisation and design of screening processes are presented.

Economy of Energy during Refrigerating Machine Operation

Idealized cycles of refrigerating machines with adiabatic and isothermal compression of refrigerant vapor were investigated. Energetic characteristics of cycles： specific mass and volume cooling capacity q0 and qv, work of compression 1, refrigerating coefficient of performance e and power N for drive of compressor were compared. These characteristics were calculated for eight refrigerants at temperature of their condensation 30 ℃ and temperatures of boiling -15℃ and -30 ℃. The calculations show that the use of isothermal compression of refrigerant vapor ensures economy of energy during refrigerating machine operation.

Noncommutative Quantum Hall Effect of Bilayer Systems

In this paper we study the bilayer quantum Hall （QH） effect on a noncommutative phase space （NCPS）. By using perturbation theory, we calculate the energy spectrum, eigenfunction, Hall current, and Hall conductivity of the bilayer QH system, and express them in terms of noncommutative parameters θ and θ^-, respectively. In our calculation, we assume that these parameters vary from laver to laver.

Characterizing big data analytics workloads on POWER8 SMT processors

Big data analytics is emerging as one kind of the most important workloads in modern data centers. Hence,it is of great interest to identify the method of achieving the best performance for big data analytics workloads running on state-of-the-art SMT( simultaneous multithreading) processors,which needs comprehensive understanding to workload characteristics. This paper chooses the Spark workloads as the representative big data analytics workloads and performs comprehensive measurements on the POWER8 platform,which supports a wide range of multithreading. The research finds that the thread assignment policy and cache contention have significant impacts on application performance. In order to identify the potential optimization method from the experiment results,this study performs micro-architecture level characterizations by means of hardware performance counters and gives implications accordingly.

Optimization of Performance and Emission Characteristics of PPCCI Engine fuelled with Ethanol and Diesel blends Using Grey-Taguchi Method

The performance and emission characteristics of a PPCCI engine fuelled with ethanol and diesel blends were car- ded out on a single cylinder air cooled CI engine. In order to achieve the optimal process response with a limited number of experimental cycles, multi objective grey relational analysis had been applied for solving a multiple response optimization problem. Using grey relational grade and signal-to-noise ratio as a performance index, a combination of input parameters was prefigured so as to achieve optimum response characteristics. It was observed that 20% premixed ratio of blend was most suitable for use in a PPCCI engine without significantly affecting the engine performance and emissions characteristics.

Solution of Dirac Equation with Generalized Hylleraas Potential

We employ the parametric generalization of the Nikiforov-Uvarov method to solve the Alhaidari formal- ism of the Dirac equation with a generalized Hylleraas potential of the form V（τ）= V0（a ＋ exp （λτ））/（b ＋ exp （λτ）） ＋ V1（ d ＋ exp （ λτ） ） / （b ＋ exp （λτ））. We obtain the bound state energy eigenvalue and the corresponding eigenfunction ex- pressed in terms of the Jaeobi polynomials. By choosing appropriate parameter in the potential model, the generalized Hylleraas potential reduces to the well known potentials as special cases.

Linear recurring sequences and subfield subcodes of cyclic codes

Linear recurring sequences over finite fields play an important role in coding theory and cryptography. It is known that subfield subcodes of linear codes yield some good codes. In this paper, we study linear recurring sequences and subfield subcodes. Let Mqm(f(x)) denote the set of all linear recurring sequences over Fqm with characteristic polynomial f(x) over Fqm . Denote the restriction of Mqm(f(x)) to sequences over Fq and the set after applying trace function to each sequence in Mqm(f(x)) by Mqm(f(x)) | Fq and Tr( Mqm(f(x))), respectively. It is shown that these two sets are both complete sets of linear recurring sequences over Fq with some characteristic polynomials over Fq. In this paper, we firstly determine the characteristic polynomials for these two sets. Then, using these results, we determine the generator polynomials of subfield subcodes and trace codes of cyclic codes over Fqm .