Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining featu...Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining features in design for manufacturability from two aspects: formal definition and manufacturability analysis. Some definitions for machining feature based upon the selection and sequencing of material removal operations for component in accordance with the design geometry are presented and a framework of feature based design for manufacturability is outlined correspondingly. The proposed scheme contributes to several aspects of feature based CAD/CAM integration, especially to encourage potentially a more generic approach to the automation of design.展开更多
AIM： To investigate the value of two-dimensional （2D） and three-dimensional （3D） double contrast-enhanced ultrasonography （DCUS） imaging for evaluation of gas- tric lesions. METHODS： 2D and 3D DCUS imaging wit...AIM： To investigate the value of two-dimensional （2D） and three-dimensional （3D） double contrast-enhanced ultrasonography （DCUS） imaging for evaluation of gas- tric lesions. METHODS： 2D and 3D DCUS imaging with both oral and intravenous administrations of contrast agents was used to assess gastroscopiclly-confirmed gastric lesions in 46 patients with benign and malignant diseases. Initially, liquid-based ultrasound contrast agent （Xinzhang） was given orally at dose of 500-600 mL for conventional ultrasound examination of the gastric lesions, and then a microbubble-based contrast agent （SonoVue） was injected intravenously at dose of 1.2-2.4 mL in bolus fashion to assess the perfusion pattern of the lesions using contrast imaging modes. The parameters derived from time-intensity curves including the arrival time （AT）, time to peak （lq-P）, peak intensity （PI） and en- hanced intensity （EI） were measured on the 2D DCUS imaging. 3D DCUS of the lesions was acquired to dem- onstrate the value of this imaging mode. RESULTS： There were 22 cases with benign lesions including chronic gastritis （n= 5）, gastric ulcer （n = 9）, gastric polyps （n = 3）, gastric stromal tumors （n = 5）, and 24 cases with malignant lesions including gastric cancer （n = 20）, gastric cardia carcinoma （n = 3） and post-operative recurrent gastric cancer （n = 1） in the study, The oral contrast-enhanced ultrasonography （CEUS） imaging of the stomach clearly demonstrated the anatomy of the stomach and morphologic features of gastric lesions, With optimal scanning window and imaging display under oral CEUS, intravenous CEUS clearly showed the perfusion of gastric lesions with various characteristic manifestations. Both 2D and 3D DCUS images clearly demonstrated normal gastric wall as a three-layer structure, from the inside out, hypere- choic mucosa, hypoechoic muscularis and hyperechoic serosa, respectively. There were statistical significant differences of AT （8.68±2.06 vs 10.43 ±2.75, P = 0.017）, PI （34.64 ± 6.63 vs 29.58 ± 8.22, P = 0.023） and EI （29.72 ± 6.69 vs 22.66 ± 7.01, P = 0.001） between malignant lesions and normal gastric wall. However, no differences of AT, PI and EI between benign lesions and normal gastric wall tissue were found. 3D DCUS could intuitively display morphological features and vascularities of the lesions with multiplanar and volume views. 3D DCUS imaging provided comprehen- sive information complementary to 2D imaging. The crater or wellhead appearances and feeding vessels as well as distorted nourishing vasculature of gastric carcinoma were better seen with 3D imaging than 2D imaging. CONCLUSION： DCUS imaging can simultaneouslydisplay the anatomic and perfusion features of gastric lesions. 3D DCUS can provide additional information to 2D DCUS for evaluation of gastric lesions.展开更多
The transformation of the medieval city of Rhodes and the modification of its buildings since the siege of 1522 by Suleiman the Magnificent up to the 20th century, were imposed by the social and religious needs of eac...The transformation of the medieval city of Rhodes and the modification of its buildings since the siege of 1522 by Suleiman the Magnificent up to the 20th century, were imposed by the social and religious needs of each of its conquerors. In particular, during the period of the Ottoman rule （1522-1912）, most of the churches were converted into mosques while new buildings like public baths and mansions were constructed, resulting in alterations in the morphological characteristics of the city. Although the buildings of the Hospitalier＇s period （1307-1522） were preserved, the additions and adjustments resulted into a mixture of western and oriental architecture, which today determines the multicultural identity of the city. In 1988, UNESCO （United Nations Educational, Scientific, and Cultural Organization） designated the medieval city of Rhodes as a world heritage city for its exemplary architectural complexity and variability, which perfectly reflects the complex historical phenomena and the unique integration of various cultures for more than seven centuries. In this paper, the management of the modifications and the restoration approach of four representative mosques are presented.展开更多
This report first gives a general description of Cambodia and then discusses its topographic and geological features. Finally, the current situation concerning erosion and sediment disasters is discussed.
Purpose： Posttraumatic arthritis （PTA） may develop years after acetabular fracture, hindering joint function and causing significant chronic musculoskeletal pain. Given the delayed onset of PTA, few studies have as...Purpose： Posttraumatic arthritis （PTA） may develop years after acetabular fracture, hindering joint function and causing significant chronic musculoskeletal pain. Given the delayed onset of PTA, few studies have assessed outcomes of delayed total hip arthroplasty （THA） in acetabular fracture patients. This study systematically reviewed the literature for outcomes of THA in patients with PTA and prior acetabular fracture. Methods： Pubmed, EMBASE, SCOPUS, and Cochrane library were searched for articles containing the keywords ＂acetabular＂, ＂fracture＂, ＂arthroplasty＂, and ＂post traumatic arthritis＂ published between 1995 and August 2017. Studies with less than 10 patients, less than 2 years of follow-up, conference abstracts, and non-English language articles were excluded. Data on patient demographics, surgical characteristics, and outcomes of delayed THA, including implant survival, complications, need for revision, and functional scores, was collected from eligible studies. Results： With 1830 studies were screened and data from 10 studies with 448 patients were included in this review, The median patient age on date of THA was 51.5 years, ranging from 19 to 90 years. The median time from fracture to THA was 37 months, with a range of 27-74 months. Mean follow-up times ranged from 4 to 20 years, The mean Harris hip scores （HHS） improved from 41.5 pre-operatively, to 87.6 post-operatively, The most prevalent postoperative complications were heterotopic ossification （28% -63%）, implant loosening （1%-24%）, and infection （0%-16%）. The minimum 5-year survival of implants ranged from 70% to 100%. Revision rates ranged from 2% to 32%. Conclusion： Despite the difficulties associated with performing THA in patients with PTA from previous acetabular fracture （including soft tissue scarring, existing hardware, and acetabular bone loss） and the relatively high complication rates, THA in patients with VIA following prior acetabular fracture leads to significant improvement in pain and function at 10-year follow-up. Further high quality randomized controlled studies are needed to confirm the outcomes after delayed THA in these patients.展开更多
Here we describe ductile, ductile-brittle and brittle deformation styles in the northern segment of the Tertiary Biluoxue- shan-Chongshan shear zone lying to the east of the Eastern Himalayan Syntaxis. In the northern...Here we describe ductile, ductile-brittle and brittle deformation styles in the northern segment of the Tertiary Biluoxue- shan-Chongshan shear zone lying to the east of the Eastern Himalayan Syntaxis. In the northernmost part of the zone in the vi- cinity of the Eastern Himalayan Syntaxis, it consists of mylonitic gneiss, granite, and schist. Based on field relations and min- eral assemblages, the rocks are classified into gneiss belt in the west limb, including banded gneiss, augen mylonite and mig- matite gneiss, and schist belt in the east limb. Except for the massive granite pluton, the other three tectonites are affected by polystage deformation （D1-D4）. Fold deformation of the first stage D1 is isoclinal to tight pattern with nearly N-S fold axes and steeply axial planar cleavage S 1, which resulted in the local crustal thickening under a contractive setting. D2 overprinted D1 and is characterized by tight folds with steep axes and N-S fold axial planar, which are also characterized by large-scale ductile strike-slip shear foliation $2, parallel to the nearly N-S trending axial planes of D1 and D2. The structural pattern of D2 represents a transpression along the zone. D3 occurred during the late stage of the transpression or post-transpression, produc- ing the NW-SE and NE-SW trending strike-slip faults of the third stage D3. Following the D3 deformation, the zone was ex- humed to shallow crustal level where the various tectonites underwent a brittle transtensional deformation D4, combined with one N-S trending strike-slip component and one normal faulting component. Structures and previous geochronologies pre- sented in the paper suggest that the study area is correlated with those in the adjacent tectonic zones, Ailaoshan-Red River shear zone and Gaoligong shear zone in the western Yunnan. It underwent intensive polyphase deformation, namely, crustal thickening, transpression, and transtension, responding to syn-collision and post-collision of India-Eurasia from 65 Ma to cur- rent period east of the Eastern Himalayan Syntaxis.展开更多
文摘Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining features in design for manufacturability from two aspects: formal definition and manufacturability analysis. Some definitions for machining feature based upon the selection and sequencing of material removal operations for component in accordance with the design geometry are presented and a framework of feature based design for manufacturability is outlined correspondingly. The proposed scheme contributes to several aspects of feature based CAD/CAM integration, especially to encourage potentially a more generic approach to the automation of design.
基金Supported by A key medical project in Nanjing Military District of the Chinese People’s Liberation Army,No. 09Z039
文摘AIM： To investigate the value of two-dimensional （2D） and three-dimensional （3D） double contrast-enhanced ultrasonography （DCUS） imaging for evaluation of gas- tric lesions. METHODS： 2D and 3D DCUS imaging with both oral and intravenous administrations of contrast agents was used to assess gastroscopiclly-confirmed gastric lesions in 46 patients with benign and malignant diseases. Initially, liquid-based ultrasound contrast agent （Xinzhang） was given orally at dose of 500-600 mL for conventional ultrasound examination of the gastric lesions, and then a microbubble-based contrast agent （SonoVue） was injected intravenously at dose of 1.2-2.4 mL in bolus fashion to assess the perfusion pattern of the lesions using contrast imaging modes. The parameters derived from time-intensity curves including the arrival time （AT）, time to peak （lq-P）, peak intensity （PI） and en- hanced intensity （EI） were measured on the 2D DCUS imaging. 3D DCUS of the lesions was acquired to dem- onstrate the value of this imaging mode. RESULTS： There were 22 cases with benign lesions including chronic gastritis （n= 5）, gastric ulcer （n = 9）, gastric polyps （n = 3）, gastric stromal tumors （n = 5）, and 24 cases with malignant lesions including gastric cancer （n = 20）, gastric cardia carcinoma （n = 3） and post-operative recurrent gastric cancer （n = 1） in the study, The oral contrast-enhanced ultrasonography （CEUS） imaging of the stomach clearly demonstrated the anatomy of the stomach and morphologic features of gastric lesions, With optimal scanning window and imaging display under oral CEUS, intravenous CEUS clearly showed the perfusion of gastric lesions with various characteristic manifestations. Both 2D and 3D DCUS images clearly demonstrated normal gastric wall as a three-layer structure, from the inside out, hypere- choic mucosa, hypoechoic muscularis and hyperechoic serosa, respectively. There were statistical significant differences of AT （8.68±2.06 vs 10.43 ±2.75, P = 0.017）, PI （34.64 ± 6.63 vs 29.58 ± 8.22, P = 0.023） and EI （29.72 ± 6.69 vs 22.66 ± 7.01, P = 0.001） between malignant lesions and normal gastric wall. However, no differences of AT, PI and EI between benign lesions and normal gastric wall tissue were found. 3D DCUS could intuitively display morphological features and vascularities of the lesions with multiplanar and volume views. 3D DCUS imaging provided comprehen- sive information complementary to 2D imaging. The crater or wellhead appearances and feeding vessels as well as distorted nourishing vasculature of gastric carcinoma were better seen with 3D imaging than 2D imaging. CONCLUSION： DCUS imaging can simultaneouslydisplay the anatomic and perfusion features of gastric lesions. 3D DCUS can provide additional information to 2D DCUS for evaluation of gastric lesions.
文摘The transformation of the medieval city of Rhodes and the modification of its buildings since the siege of 1522 by Suleiman the Magnificent up to the 20th century, were imposed by the social and religious needs of each of its conquerors. In particular, during the period of the Ottoman rule （1522-1912）, most of the churches were converted into mosques while new buildings like public baths and mansions were constructed, resulting in alterations in the morphological characteristics of the city. Although the buildings of the Hospitalier＇s period （1307-1522） were preserved, the additions and adjustments resulted into a mixture of western and oriental architecture, which today determines the multicultural identity of the city. In 1988, UNESCO （United Nations Educational, Scientific, and Cultural Organization） designated the medieval city of Rhodes as a world heritage city for its exemplary architectural complexity and variability, which perfectly reflects the complex historical phenomena and the unique integration of various cultures for more than seven centuries. In this paper, the management of the modifications and the restoration approach of four representative mosques are presented.
文摘This report first gives a general description of Cambodia and then discusses its topographic and geological features. Finally, the current situation concerning erosion and sediment disasters is discussed.
文摘Purpose： Posttraumatic arthritis （PTA） may develop years after acetabular fracture, hindering joint function and causing significant chronic musculoskeletal pain. Given the delayed onset of PTA, few studies have assessed outcomes of delayed total hip arthroplasty （THA） in acetabular fracture patients. This study systematically reviewed the literature for outcomes of THA in patients with PTA and prior acetabular fracture. Methods： Pubmed, EMBASE, SCOPUS, and Cochrane library were searched for articles containing the keywords ＂acetabular＂, ＂fracture＂, ＂arthroplasty＂, and ＂post traumatic arthritis＂ published between 1995 and August 2017. Studies with less than 10 patients, less than 2 years of follow-up, conference abstracts, and non-English language articles were excluded. Data on patient demographics, surgical characteristics, and outcomes of delayed THA, including implant survival, complications, need for revision, and functional scores, was collected from eligible studies. Results： With 1830 studies were screened and data from 10 studies with 448 patients were included in this review, The median patient age on date of THA was 51.5 years, ranging from 19 to 90 years. The median time from fracture to THA was 37 months, with a range of 27-74 months. Mean follow-up times ranged from 4 to 20 years, The mean Harris hip scores （HHS） improved from 41.5 pre-operatively, to 87.6 post-operatively, The most prevalent postoperative complications were heterotopic ossification （28% -63%）, implant loosening （1%-24%）, and infection （0%-16%）. The minimum 5-year survival of implants ranged from 70% to 100%. Revision rates ranged from 2% to 32%. Conclusion： Despite the difficulties associated with performing THA in patients with PTA from previous acetabular fracture （including soft tissue scarring, existing hardware, and acetabular bone loss） and the relatively high complication rates, THA in patients with VIA following prior acetabular fracture leads to significant improvement in pain and function at 10-year follow-up. Further high quality randomized controlled studies are needed to confirm the outcomes after delayed THA in these patients.
基金supported by National Natural Science Foundation of China for Young Foundation (Grant No. 40802050)China Postdoctoral Science Foundation (Grant No. 20070420065)
文摘Here we describe ductile, ductile-brittle and brittle deformation styles in the northern segment of the Tertiary Biluoxue- shan-Chongshan shear zone lying to the east of the Eastern Himalayan Syntaxis. In the northernmost part of the zone in the vi- cinity of the Eastern Himalayan Syntaxis, it consists of mylonitic gneiss, granite, and schist. Based on field relations and min- eral assemblages, the rocks are classified into gneiss belt in the west limb, including banded gneiss, augen mylonite and mig- matite gneiss, and schist belt in the east limb. Except for the massive granite pluton, the other three tectonites are affected by polystage deformation （D1-D4）. Fold deformation of the first stage D1 is isoclinal to tight pattern with nearly N-S fold axes and steeply axial planar cleavage S 1, which resulted in the local crustal thickening under a contractive setting. D2 overprinted D1 and is characterized by tight folds with steep axes and N-S fold axial planar, which are also characterized by large-scale ductile strike-slip shear foliation $2, parallel to the nearly N-S trending axial planes of D1 and D2. The structural pattern of D2 represents a transpression along the zone. D3 occurred during the late stage of the transpression or post-transpression, produc- ing the NW-SE and NE-SW trending strike-slip faults of the third stage D3. Following the D3 deformation, the zone was ex- humed to shallow crustal level where the various tectonites underwent a brittle transtensional deformation D4, combined with one N-S trending strike-slip component and one normal faulting component. Structures and previous geochronologies pre- sented in the paper suggest that the study area is correlated with those in the adjacent tectonic zones, Ailaoshan-Red River shear zone and Gaoligong shear zone in the western Yunnan. It underwent intensive polyphase deformation, namely, crustal thickening, transpression, and transtension, responding to syn-collision and post-collision of India-Eurasia from 65 Ma to cur- rent period east of the Eastern Himalayan Syntaxis.
