定标参考目标雷达截面积(RCS)的频率、入射角相关性是一个固有性质,对于常规SAR系统,在小带宽/窄方位波束条件下通常近似认为目标具有恒定的后向散射特性,即RCS为一常数;然而,对于高分辨率SAR系统,继续用中心频点、方位角处的RCS表示大...定标参考目标雷达截面积(RCS)的频率、入射角相关性是一个固有性质,对于常规SAR系统,在小带宽/窄方位波束条件下通常近似认为目标具有恒定的后向散射特性,即RCS为一常数;然而,对于高分辨率SAR系统,继续用中心频点、方位角处的RCS表示大信号带宽/宽方位波束条件下的RCS,将会直接影响辐射定标的准确性。鉴于此,该文提出基于标准数据或参考定标体的目标辐射特性校正方法,暗室地基SAR系统仿真结果表明,在目标辐射特性校正前后,点目标积分能量相差1.2 d B;实测数据处理结果显示,经过参考目标辐射特性校正,SAR图像中点目标旁瓣更加对称,且方位向主瓣宽度变窄,在时域更接近理想点目标冲激响应,从而验证了校正算法的有效性。展开更多
The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft ...The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft seabed sediments could be simulated with certain proportion of the bentonite and water; besides, based on the theory on the interaction between the vehicle and ground and referenced to Bekker's apparatus and related experimental methods, a scenario on the experimental system of the pressure-sinkage characteristics of interaction between the track of tracked vehicle and soft seabed sediments was designed. The pressure-sinkage experiments were performed with different dimensions of penetration plates. The "pressure-sinkage" model based on Bekker's formula and correlation parameters were obtained to describe the corresponding characteristics of the seabed sediments and a smart calibration model on the pressure-sinkage characteristic of the track was established based on the function chain neural network, which could provide boundary loading conditions for simulation analysis of the tracked vehicle moving on the seabed.展开更多
An image distortion correction method is proposed, which uses the straight line features. Many parallel lines of different direction from different images were extracted, and then were used to optimize the distortion ...An image distortion correction method is proposed, which uses the straight line features. Many parallel lines of different direction from different images were extracted, and then were used to optimize the distortion parameters by nonlinear least square. The thought of step by step was added when the optimization method working. 3D world coordination is not need to know, and the method is easy to implement. The experiment result shows its high accuracy.展开更多
PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circui...PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circuit is used to conduct simulations, leading to a precise modeling. A library is configured through modeling and its accuracy is verified through simulations for widely used and representative lamps such as CCFL, fluorescent lamps, HID lamps, and electrodeless fluorescent lamps. On the basis of experiments, a lamp simulation is also performed using PSPICE, which allows us to take advantage of the lamp library easily. Also, PSPICE model driven by an electric equivalent circuit of a piezoelectric transformer is presented. In order to confirm this model to be effective, an independent model of CCFL driving circuit is used to conduct simulations, leading to a precise modeling. In addition, a new type of electronic ballast is proposed, which allows 35 W-class(T5-class) fluorescent lamp to work. This system is built by a rectifier which has improved power factor and half-bridge series resonant inverter. Also, with size of 27.5 mm high, 27.5 mm wide and 2.5 mm thick, the produced piezoelectric transformer has a high step-up ratio, through which it is possible for the electric ballast circuit to be lighter, smaller and more efficient. After the produced ballast is used to drive the fluorescent lamp for 25 min, it yields 0.95 in power factor correction, 86% in efficiency, 35.07 W in output voltage and 20.5 °C in temperature increase while meeting the characteristics of the 35 W-class fluorescent lamp.展开更多
The clustered regularly interspaced short palindromic repeats(CRISPR)/CRISPR-associated(Cas) protein 9 system(CRISPR/Cas9) provides a powerful tool for targeted genetic editing. Directed by programmable sequence-speci...The clustered regularly interspaced short palindromic repeats(CRISPR)/CRISPR-associated(Cas) protein 9 system(CRISPR/Cas9) provides a powerful tool for targeted genetic editing. Directed by programmable sequence-specific RNAs,this system introduces cleavage and double-stranded breaks at target sites precisely. Compared to previously developed targeted nucleases, the CRISPR/Cas9 system demonstrates several promising advantages, including simplicity, high specificity,and efficiency. Several broad genome-editing studies with the CRISPR/Cas9 system in different species in vivo and ex vivo have indicated its strong potential, raising hopes for therapeutic genome editing in clinical settings. Taking advantage of non-homologous end-joining(NHEJ) and homology directed repair(HDR)-mediated DNA repair, several studies have recently reported the use of CRISPR/Cas9 to successfully correct disease-causing alleles ranging from single base mutations to large insertions. In this review, we summarize and discuss recent preclinical studies involving the CRISPR/Cas9-mediated correction of human genetic diseases.展开更多
文摘定标参考目标雷达截面积(RCS)的频率、入射角相关性是一个固有性质,对于常规SAR系统,在小带宽/窄方位波束条件下通常近似认为目标具有恒定的后向散射特性,即RCS为一常数;然而,对于高分辨率SAR系统,继续用中心频点、方位角处的RCS表示大信号带宽/宽方位波束条件下的RCS,将会直接影响辐射定标的准确性。鉴于此,该文提出基于标准数据或参考定标体的目标辐射特性校正方法,暗室地基SAR系统仿真结果表明,在目标辐射特性校正前后,点目标积分能量相差1.2 d B;实测数据处理结果显示,经过参考目标辐射特性校正,SAR图像中点目标旁瓣更加对称,且方位向主瓣宽度变窄,在时域更接近理想点目标冲激响应,从而验证了校正算法的有效性。
基金Project(11JJ3059) supported by Natural Science Foundation of Hunan Province, ChinaProject(2010GK3091) supported by Science and Technology Industrial Support Program of Hunan Province, China+1 种基金Project(10B058) supported by Excellent Youth Foundation of Education Department of Hunan Province, ChinaProject(51105386) supported by the National Natural Science Foundation of China
文摘The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft seabed sediments could be simulated with certain proportion of the bentonite and water; besides, based on the theory on the interaction between the vehicle and ground and referenced to Bekker's apparatus and related experimental methods, a scenario on the experimental system of the pressure-sinkage characteristics of interaction between the track of tracked vehicle and soft seabed sediments was designed. The pressure-sinkage experiments were performed with different dimensions of penetration plates. The "pressure-sinkage" model based on Bekker's formula and correlation parameters were obtained to describe the corresponding characteristics of the seabed sediments and a smart calibration model on the pressure-sinkage characteristic of the track was established based on the function chain neural network, which could provide boundary loading conditions for simulation analysis of the tracked vehicle moving on the seabed.
文摘An image distortion correction method is proposed, which uses the straight line features. Many parallel lines of different direction from different images were extracted, and then were used to optimize the distortion parameters by nonlinear least square. The thought of step by step was added when the optimization method working. 3D world coordination is not need to know, and the method is easy to implement. The experiment result shows its high accuracy.
文摘PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circuit is used to conduct simulations, leading to a precise modeling. A library is configured through modeling and its accuracy is verified through simulations for widely used and representative lamps such as CCFL, fluorescent lamps, HID lamps, and electrodeless fluorescent lamps. On the basis of experiments, a lamp simulation is also performed using PSPICE, which allows us to take advantage of the lamp library easily. Also, PSPICE model driven by an electric equivalent circuit of a piezoelectric transformer is presented. In order to confirm this model to be effective, an independent model of CCFL driving circuit is used to conduct simulations, leading to a precise modeling. In addition, a new type of electronic ballast is proposed, which allows 35 W-class(T5-class) fluorescent lamp to work. This system is built by a rectifier which has improved power factor and half-bridge series resonant inverter. Also, with size of 27.5 mm high, 27.5 mm wide and 2.5 mm thick, the produced piezoelectric transformer has a high step-up ratio, through which it is possible for the electric ballast circuit to be lighter, smaller and more efficient. After the produced ballast is used to drive the fluorescent lamp for 25 min, it yields 0.95 in power factor correction, 86% in efficiency, 35.07 W in output voltage and 20.5 °C in temperature increase while meeting the characteristics of the 35 W-class fluorescent lamp.
基金supported by the National Natural Science Foundation (NSFC81502677, NSFC81602699, NSFC81123003)the National Key Research and Development Program of China (2016YFA0201402)the Key Technologies R & D program of Sichuan Province (2015FZ0040)
文摘The clustered regularly interspaced short palindromic repeats(CRISPR)/CRISPR-associated(Cas) protein 9 system(CRISPR/Cas9) provides a powerful tool for targeted genetic editing. Directed by programmable sequence-specific RNAs,this system introduces cleavage and double-stranded breaks at target sites precisely. Compared to previously developed targeted nucleases, the CRISPR/Cas9 system demonstrates several promising advantages, including simplicity, high specificity,and efficiency. Several broad genome-editing studies with the CRISPR/Cas9 system in different species in vivo and ex vivo have indicated its strong potential, raising hopes for therapeutic genome editing in clinical settings. Taking advantage of non-homologous end-joining(NHEJ) and homology directed repair(HDR)-mediated DNA repair, several studies have recently reported the use of CRISPR/Cas9 to successfully correct disease-causing alleles ranging from single base mutations to large insertions. In this review, we summarize and discuss recent preclinical studies involving the CRISPR/Cas9-mediated correction of human genetic diseases.
