Primitive mantle normalized Platinum group elements (PGE) concentration patterns for the Zhengziyanwo intrusion and Dashibao Formation basalts are of positive slope, similar to most of the world class magmatic Ni Cu P...Primitive mantle normalized Platinum group elements (PGE) concentration patterns for the Zhengziyanwo intrusion and Dashibao Formation basalts are of positive slope, similar to most of the world class magmatic Ni Cu PGE sulfide deposits. Characters of this intrusion and its related ores and Dashibao Formation basalts are their negative Pt anomaly and high concentration of Rh relative to Pt and Pd, facts being interpreted to be the results of crystallization and fractionation of Pt alloys and spinel phase free crystallization history for the magma, respectively. PGE parameters of the Dashibao Formation basalts are consistent with the general trend of those found for the Zhengziyanwo intrusion, and this might infer a genetic link between them.展开更多
The magnetotelluric （MT） method has been among the favorite supporting tools for seismic imaging of sub-salt and sub-basalt targets. In this paper we present an example from Kachchh, India （where basaltic rocks ove...The magnetotelluric （MT） method has been among the favorite supporting tools for seismic imaging of sub-salt and sub-basalt targets. In this paper we present an example from Kachchh, India （where basaltic rocks overlie Mesozoic sedimentary rocks）, and discuss the feasibility of using MT method as an exploration tool in this geological setting. Our results highlight the difference in magnetotelluric response caused by the thin intrabasalt layering. The key issue addressed in this paper is what MT can and cannot provide in such geological settings. First, we compute apparent resistivity and phase response curves using representative resistivity-depth models and borehole data from the study area. Later, we compare these results to assess the plausibility of using MT to image the sub-volcanic sediments at Kachchh. Finally, we substantiate our discussion through one-dimensional inversion of the field observed MT data from this region that exhibits poor sensitivity of MT for thin basalt layers.展开更多
In order to explain the formation process of slope hazards, and to identify the key factors leading to instability of a slope, Emeishan basalt saprolite in vadose zones of the Touzhai landslide in Zhaotong, Yunnan, wa...In order to explain the formation process of slope hazards, and to identify the key factors leading to instability of a slope, Emeishan basalt saprolite in vadose zones of the Touzhai landslide in Zhaotong, Yunnan, was studied. The formation and evolution of Emeishan basalt saprolite was examined using, amongst other techniques, field investigations,thin section analysis, scanning electron microscopy(SEM) observations, chemical analysis, physical and water-physical property tests of rock masses. Field observations revealed that the majority of the weathered rock blocks were presented as a concentric layer structure in which an internal corestone was enveloped with several layers of external saprolized crust. Chemical and mineralogical analysis identified that iron was the most sensitive element and that the weathering progress usually started with the oxidation of Fe2+ to Fe3+ in rock blocks. Alkaline elements such as Si, Ca, Mg, Na and K were also dissolved and Fe and Al were concentrated in saprolized crusts. Results indicated that loss on ignition(LOI) also increased significantly. SEM results showed that the weathering intensity of thebasalt blocks decreased gradually from the outside to the inside, and the mineral morphology significantly differed on both sides of the weathering front. The saprolized crusts presented cellular microstructure features due to the generation of micropore and clay minerals. Thin section analysis showed that plagioclase was relatively more stable than pyroxene and chlorite during weathering. With a centripetal propagation of the weathering front, saprolized crusts became thicker and corestones became smaller; fresh Emeishan basalt blocks gradually turned into saprolized blocks. Due to the loose structure and low strength of saprolite, the quality of the Emeishan basalt mass significantly deteriorated, this being a potentially important factor which caused the Touzhai landslide to occur.展开更多
Wave equation wave field numerical modeling technology is applied to the observation that deep layer imaging is difficult below a screening layer of high-velocity basalt. Three simple high-velocity basalt models are d...Wave equation wave field numerical modeling technology is applied to the observation that deep layer imaging is difficult below a screening layer of high-velocity basalt. Three simple high-velocity basalt models are designed on the basis of basalt formation characteristics. The analysis of deep-layer reflection seismic signal energy shows that lowfrequency seismic signals are capable of both penetrating the thin high-velocity basalt layer and reducing the diffraction noise caused by the rough surfaces. The simulation experiment of a complete 2D basalt model confirms that the low-frequency signals can be used to boost the quality of deep-layer imaging under the high-velocity basalt layer and achieve good results in low-pass filter processing of actual data.展开更多
Xianglushan-type iron deposits are one of the new types of iron deposits found in the Weining Area of Western Guizhou. The iron-bearing rock system is a paleo-weathered crustal sedimentary(or accumulating) stratum bet...Xianglushan-type iron deposits are one of the new types of iron deposits found in the Weining Area of Western Guizhou. The iron-bearing rock system is a paleo-weathered crustal sedimentary(or accumulating) stratum between the top of the Middle-Late Permian Emeishan basalt formation and the Late Permian Xuanwei formation. Iron ore is hosted in the Lower-Middle part of the rock system. In terms of the genesis of mineral deposit, this type of deposit should be a basalt paleo-weathering crustal redeposit type, very different from marine sedimentary iron deposits or continental weathering crust iron deposits. Based on field work and the analytical results of XRD Powder Diffraction, Electron Probe, Scanner Electron Microscope, etc., the geological setting of the ore-forming processes and the deposit features are illustrated in this paper. The ore-forming environment of the deposit and the Emeishan basalt weathering mineralization are also discussed in order to enhance the knowledge of the universality and diversity of mineralization of the Emeishan Large Igneous Province(ELIP), which may be a considerable reference to further research for ELIP metallogenic theories, and geological research for iron deposits in the paleo-weathering crust areas of the Emeishan basalt,Southwestern, China.展开更多
The macro- and microscopic results were that this body of basalt tectonically heavily loaded, strongly altered by clay minerals and characterized by hydro-metasomatic alteration. The geochemical analyzes revealed that...The macro- and microscopic results were that this body of basalt tectonically heavily loaded, strongly altered by clay minerals and characterized by hydro-metasomatic alteration. The geochemical analyzes revealed that the original magma could be a mantle origin of high iron and magnesium containing basalt （tholeiites, 10%-15%）. As regards to the palaeogeographic environment, it can be said that due to the periodic sea flooding, it pushed into a lower area, covered with sediment where the surrounding areas were highlighted （biikkszentkereszt and bukkszentlaszl6 tufts）.展开更多
基金supported by NSFC(Grant Nos.40072037,40273025)NKBRSF Project(Grant No.G1999043200)
文摘Primitive mantle normalized Platinum group elements (PGE) concentration patterns for the Zhengziyanwo intrusion and Dashibao Formation basalts are of positive slope, similar to most of the world class magmatic Ni Cu PGE sulfide deposits. Characters of this intrusion and its related ores and Dashibao Formation basalts are their negative Pt anomaly and high concentration of Rh relative to Pt and Pd, facts being interpreted to be the results of crystallization and fractionation of Pt alloys and spinel phase free crystallization history for the magma, respectively. PGE parameters of the Dashibao Formation basalts are consistent with the general trend of those found for the Zhengziyanwo intrusion, and this might infer a genetic link between them.
文摘The magnetotelluric （MT） method has been among the favorite supporting tools for seismic imaging of sub-salt and sub-basalt targets. In this paper we present an example from Kachchh, India （where basaltic rocks overlie Mesozoic sedimentary rocks）, and discuss the feasibility of using MT method as an exploration tool in this geological setting. Our results highlight the difference in magnetotelluric response caused by the thin intrabasalt layering. The key issue addressed in this paper is what MT can and cannot provide in such geological settings. First, we compute apparent resistivity and phase response curves using representative resistivity-depth models and borehole data from the study area. Later, we compare these results to assess the plausibility of using MT to image the sub-volcanic sediments at Kachchh. Finally, we substantiate our discussion through one-dimensional inversion of the field observed MT data from this region that exhibits poor sensitivity of MT for thin basalt layers.
基金funded by the Joint Funds of the Natural Science Foundation of China with the Natural Science Foundation of Yunnan (Grant No. U1502232,U1033601)the Research Fund for the Doctoral Program of Higher Education of China(Grant No. 20135314110005)
文摘In order to explain the formation process of slope hazards, and to identify the key factors leading to instability of a slope, Emeishan basalt saprolite in vadose zones of the Touzhai landslide in Zhaotong, Yunnan, was studied. The formation and evolution of Emeishan basalt saprolite was examined using, amongst other techniques, field investigations,thin section analysis, scanning electron microscopy(SEM) observations, chemical analysis, physical and water-physical property tests of rock masses. Field observations revealed that the majority of the weathered rock blocks were presented as a concentric layer structure in which an internal corestone was enveloped with several layers of external saprolized crust. Chemical and mineralogical analysis identified that iron was the most sensitive element and that the weathering progress usually started with the oxidation of Fe2+ to Fe3+ in rock blocks. Alkaline elements such as Si, Ca, Mg, Na and K were also dissolved and Fe and Al were concentrated in saprolized crusts. Results indicated that loss on ignition(LOI) also increased significantly. SEM results showed that the weathering intensity of thebasalt blocks decreased gradually from the outside to the inside, and the mineral morphology significantly differed on both sides of the weathering front. The saprolized crusts presented cellular microstructure features due to the generation of micropore and clay minerals. Thin section analysis showed that plagioclase was relatively more stable than pyroxene and chlorite during weathering. With a centripetal propagation of the weathering front, saprolized crusts became thicker and corestones became smaller; fresh Emeishan basalt blocks gradually turned into saprolized blocks. Due to the loose structure and low strength of saprolite, the quality of the Emeishan basalt mass significantly deteriorated, this being a potentially important factor which caused the Touzhai landslide to occur.
文摘Wave equation wave field numerical modeling technology is applied to the observation that deep layer imaging is difficult below a screening layer of high-velocity basalt. Three simple high-velocity basalt models are designed on the basis of basalt formation characteristics. The analysis of deep-layer reflection seismic signal energy shows that lowfrequency seismic signals are capable of both penetrating the thin high-velocity basalt layer and reducing the diffraction noise caused by the rough surfaces. The simulation experiment of a complete 2D basalt model confirms that the low-frequency signals can be used to boost the quality of deep-layer imaging under the high-velocity basalt layer and achieve good results in low-pass filter processing of actual data.
基金supported by PMO of Guizhou Institute of Technology for the Study of Iron Deposit Oreforming Rule,Ore-controlling Factors and Ore-forming Predication in the Western Region of Guizhou Province(No.406,2015)PMO of Innovation Team of Guizhou General Institutes of Higher Education for Survey of Underlying Ore Deposit(No.56,2015)+1 种基金the Education Reform of the Guizhou Institute of Technology(No.2015JGY18)the Study for Existing State of Rare Earth Elements in Low Grade Iron Ore from Associated Multi-metal Deposits in Northwest Guizhou(Ref.No.05,2014)
文摘Xianglushan-type iron deposits are one of the new types of iron deposits found in the Weining Area of Western Guizhou. The iron-bearing rock system is a paleo-weathered crustal sedimentary(or accumulating) stratum between the top of the Middle-Late Permian Emeishan basalt formation and the Late Permian Xuanwei formation. Iron ore is hosted in the Lower-Middle part of the rock system. In terms of the genesis of mineral deposit, this type of deposit should be a basalt paleo-weathering crustal redeposit type, very different from marine sedimentary iron deposits or continental weathering crust iron deposits. Based on field work and the analytical results of XRD Powder Diffraction, Electron Probe, Scanner Electron Microscope, etc., the geological setting of the ore-forming processes and the deposit features are illustrated in this paper. The ore-forming environment of the deposit and the Emeishan basalt weathering mineralization are also discussed in order to enhance the knowledge of the universality and diversity of mineralization of the Emeishan Large Igneous Province(ELIP), which may be a considerable reference to further research for ELIP metallogenic theories, and geological research for iron deposits in the paleo-weathering crust areas of the Emeishan basalt,Southwestern, China.
文摘The macro- and microscopic results were that this body of basalt tectonically heavily loaded, strongly altered by clay minerals and characterized by hydro-metasomatic alteration. The geochemical analyzes revealed that the original magma could be a mantle origin of high iron and magnesium containing basalt （tholeiites, 10%-15%）. As regards to the palaeogeographic environment, it can be said that due to the periodic sea flooding, it pushed into a lower area, covered with sediment where the surrounding areas were highlighted （biikkszentkereszt and bukkszentlaszl6 tufts）.
