Grain cooking and nutrient qualities are the most important components of rice （Oryza sativa L.） quality. A doubled haploid （DH） population from a cross between two japonica cultivars was used to examine the pheno...Grain cooking and nutrient qualities are the most important components of rice （Oryza sativa L.） quality. A doubled haploid （DH） population from a cross between two japonica cultivars was used to examine the phenotypic values and potential QTLs for the quality traits. The cooking and nutrient quality traits, including the amylose content （AC）, the gel consistency （CJC）, the gelatinization temperature （GT）, and the protein content （PC）, in rice grown under upland and lowland environments were evaluated. Significant differences for AC, GC, GT, and PC between upland and lowland environments were detected. The phenotypic values of all four traits were higher under upland environment than lowland environment. The value of PC under upland environment was significantly higher （by 37.9%） than that under lowland environment. This suggests that upland cultivation had large effect on both cooking and nutrient qualifies. A total of seven QTLs and twelve pairs of QTLs were detected to have significant additive and epistatic effects for the four traits. Significant Q x E interaction effects of two QTLs and two pairs of QTLs were also discovered. The general contribution of additive QTLs ranged from 1.91% to 19.77%. The Q × E interactions of QTLs QGt3 and QAc6 accounted for 8.99% and 47.86% of the phenotypic variation, respectively, whereas those of the 2 pairs of epistatic QTLs, QAc6-QAcllb and QAc8-QAc9, accounted for 32.54% and 11.82%, respectively. Five QTLs QGt6b, QGt8, QGt11, QGcl, and QPc2, which had relatively high general contribution and no Q x E interactions, were selected to facilitate the upland rice grain quality breeding.展开更多
Determining the hydrometallurgical cut-off grades specifies the destination of low grade materials and this is subjected to more benefits in mining. Copper production rate is considered as one of the fundamental issue...Determining the hydrometallurgical cut-off grades specifies the destination of low grade materials and this is subjected to more benefits in mining. Copper production rate is considered as one of the fundamental issues in hydrometallurgical cut-off grades determination. Slags are remarked as one of the main sources of copper. It is not only regarded as a waste but also identified as another resource extracting base metals. Slags are characterized by copper high grade. Thus, slag copper recovery can be led to different cut-off grades and net present value(NPV). The current research scrutinizes the effect of slag recovery by both flotation and hydrometallurgical methods on the hydrometallurgical cut-off grades. For this purpose, the optimum cut-off grade algorithms of hydrometallurgical methods are developed by considering associated environmental parameters, incomes and also the costs. Then, their optimum amounts are calculated with NPV maximization as an objective function. The results indicate that considering slag copper recovery in the hydrometallurgical cut-off grade algorithms reduces the environmental costs caused by slag dumping and leads to more NPV by 9%.展开更多
Single‐atom catalysts have been proposed as promising electrocatalysts for CO_(2) reduction reactions(CO_(2)RR).Co‐N_(4) active sites have attracted wide attention owing to their excellent CO selectivity and activit...Single‐atom catalysts have been proposed as promising electrocatalysts for CO_(2) reduction reactions(CO_(2)RR).Co‐N_(4) active sites have attracted wide attention owing to their excellent CO selectivity and activity.However,the effect of the local coordination environment of Co sites on CO_(2) reduction reaction pathways is still unclear.In this study,we investigated the CO_(2) reduction reaction pathways on Co‐N_(4) sites supported on conjugated N_(4)‐macrocyclic ligands with 1,10‐phenanthroline subunits(Co‐N_(4)‐CPY)by density functional theory calculations.The local coordination environment of single‐atom Co sites with N substituted by O(Co‐N_(3)O‐CPY)and C(Co‐N_(3)C‐CPY)was studied for comparison.The calculation results revealed that both C and O coordination break the symmetry of the primary CoN_(4) ligand field and induce charge redistribution of the Co atom.For Co‐N_(4)‐CPY,CO was confirmed to be the main product of CO_(2)RR.HCOOH is the primary product of Co‐N_(3)O‐CPY because of the greatly increased energy barrier of CO_(2) to*COOH.Although the energy barrier of CO_(2) to*COOH is reduced on Co‐N_(3)C‐CPY,the desorption process of*CO becomes more difficult.CH3OH(or CH_(4))are obtained by further*CO hydrogenation reduction when using Co‐N_(3)C‐CPY.This work provides new insight into the effect of the local coordination environment of single‐atom sites on CO_(2) reduction reaction pathways.展开更多
基金This work was supported by the State Key Basic Research and Development Plan of China (973)the Hi-Tech Research and De-velopment Program of China (863) National Natural Science Foundation of China.
文摘Grain cooking and nutrient qualities are the most important components of rice （Oryza sativa L.） quality. A doubled haploid （DH） population from a cross between two japonica cultivars was used to examine the phenotypic values and potential QTLs for the quality traits. The cooking and nutrient quality traits, including the amylose content （AC）, the gel consistency （CJC）, the gelatinization temperature （GT）, and the protein content （PC）, in rice grown under upland and lowland environments were evaluated. Significant differences for AC, GC, GT, and PC between upland and lowland environments were detected. The phenotypic values of all four traits were higher under upland environment than lowland environment. The value of PC under upland environment was significantly higher （by 37.9%） than that under lowland environment. This suggests that upland cultivation had large effect on both cooking and nutrient qualifies. A total of seven QTLs and twelve pairs of QTLs were detected to have significant additive and epistatic effects for the four traits. Significant Q x E interaction effects of two QTLs and two pairs of QTLs were also discovered. The general contribution of additive QTLs ranged from 1.91% to 19.77%. The Q × E interactions of QTLs QGt3 and QAc6 accounted for 8.99% and 47.86% of the phenotypic variation, respectively, whereas those of the 2 pairs of epistatic QTLs, QAc6-QAcllb and QAc8-QAc9, accounted for 32.54% and 11.82%, respectively. Five QTLs QGt6b, QGt8, QGt11, QGcl, and QPc2, which had relatively high general contribution and no Q x E interactions, were selected to facilitate the upland rice grain quality breeding.
文摘Determining the hydrometallurgical cut-off grades specifies the destination of low grade materials and this is subjected to more benefits in mining. Copper production rate is considered as one of the fundamental issues in hydrometallurgical cut-off grades determination. Slags are remarked as one of the main sources of copper. It is not only regarded as a waste but also identified as another resource extracting base metals. Slags are characterized by copper high grade. Thus, slag copper recovery can be led to different cut-off grades and net present value(NPV). The current research scrutinizes the effect of slag recovery by both flotation and hydrometallurgical methods on the hydrometallurgical cut-off grades. For this purpose, the optimum cut-off grade algorithms of hydrometallurgical methods are developed by considering associated environmental parameters, incomes and also the costs. Then, their optimum amounts are calculated with NPV maximization as an objective function. The results indicate that considering slag copper recovery in the hydrometallurgical cut-off grade algorithms reduces the environmental costs caused by slag dumping and leads to more NPV by 9%.
文摘Single‐atom catalysts have been proposed as promising electrocatalysts for CO_(2) reduction reactions(CO_(2)RR).Co‐N_(4) active sites have attracted wide attention owing to their excellent CO selectivity and activity.However,the effect of the local coordination environment of Co sites on CO_(2) reduction reaction pathways is still unclear.In this study,we investigated the CO_(2) reduction reaction pathways on Co‐N_(4) sites supported on conjugated N_(4)‐macrocyclic ligands with 1,10‐phenanthroline subunits(Co‐N_(4)‐CPY)by density functional theory calculations.The local coordination environment of single‐atom Co sites with N substituted by O(Co‐N_(3)O‐CPY)and C(Co‐N_(3)C‐CPY)was studied for comparison.The calculation results revealed that both C and O coordination break the symmetry of the primary CoN_(4) ligand field and induce charge redistribution of the Co atom.For Co‐N_(4)‐CPY,CO was confirmed to be the main product of CO_(2)RR.HCOOH is the primary product of Co‐N_(3)O‐CPY because of the greatly increased energy barrier of CO_(2) to*COOH.Although the energy barrier of CO_(2) to*COOH is reduced on Co‐N_(3)C‐CPY,the desorption process of*CO becomes more difficult.CH3OH(or CH_(4))are obtained by further*CO hydrogenation reduction when using Co‐N_(3)C‐CPY.This work provides new insight into the effect of the local coordination environment of single‐atom sites on CO_(2) reduction reaction pathways.
