A shaped annular beam tri-heterodyne confocal microscope with good anti-environmental interference capability

annular beam tri-heterodyne confocal microscope has been proposed to improve the anti-environmental interference capability and the resolution of a eonfoeal microscope. It simultaneously detects far-, on-, and near-focus signals with given phase differences by dividing the measured light path of the eonfoeal microscope into three sub-paths （signals）. Pair-wise real-time heterodyne subtraction of the three signals is used to improve the anti-environmental interference capability, axial resolution, and linearity; and a shaped annular beam super-resolution technique is used to improve lateral resolution. Theoretical analyses and preliminary experiments indicate that an axial resolution of about 1 nm can be achieved with a shaped annular beam tri-heterodyne confoeal microscope and its lateral resolution can be better than 0.2 um for A = 632.8 nm, the numerical aperture of the lens of the microscope is NA = 0.85, and the normalized radius e = 0.5.

The Technology Analysis of Blast Furnace Foundation Large Volume of Concrete Structure Construction at Minus Temperature Severe Winter

Construction of mass concrete structures face more challenges in temperature difference and complex stress under low temperature than the ambient temperature. It has been proved by the practice that, not only improving tensile strength of structural concrete as soon as possible and removing of constrain as much as possible, but also calculation of the thermal stress in the process of construction and maintenance, controlling structure of concrete tensile strength and temperature difference stress ratio can ensure the safety and defect-free.

Blooming of bacteria and algae is a biokiller for mass-extinction of Devonian coral-stromatoporoid reef ecosystems

Studies of rock slices showed that there were many kinds of symbioses between bacteria and algae and corals-stromatoporoids in the coral-stromatoporoid reefs from the Devonian Ganxi section of Sichuan and the Dushan section of Guizhou in South China. They included encrustations, microborings, bioclaustration, etc. In the host corals-stromatoporoids invaded by bacteria and algae were many residues of dead soft issue in the infected parts, where the skeletal structures were injured. Therefore, we considered there were direct interactions between corals-stromatoporoids and bacteria and algae in coral-stromatoporoid reefs, which included that bacteria and algae blocked growth of corals-stromatoporoids and the latter had the ability of self-healing. And the bacteria and algae usually was the active side. In the Middle Devonian with normal seawater condition, corals and stromatoporoids had the ability to resist the invasion of bacteria and algae, and the host coral-stromatoporoids would not be killed; but in the Late Devonian with deterioration of seawater quality, the ability of bacteria and algae infection increased while corals-stromatoporoids' ability to resist infection declined, and therefore the host corals-stromatoporoids would be dead. Hence we suggested that the invading of bacteria and algae was a possible biokiller for mass-extinction of the Devonian coral-stromatoporoid reefs ecosystem. Beyond that, blooming of bacteria and algae and its triggering cumulative environmental effects played an important role in the reduction and extinction of metazoan in the Late Devonian. Furthermore, it can be used as a useful example to learn the trend and the reasons for the disease and decrease of modern coral reefs.

Fiber Bragg Grating Strain Sensors for Marine Engineering

For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound （SMC）, with the good anti-corrosion ability were chosen as the packaging materials for the fiber Bragg grating （FBG） strain sensors. By selecting a highly sensitive structure of the fiber Bragg grating strain sensor, the performances of the sensors with three materials were investigated both numerically and experimentally. The strain sensitivities were 3.76pm/με, 3.02pm/με and 3.03pm/με, respectively. The linearity was better than 0.998. It provides useful information for developing sensors for the marine engineering.