环模颗粒机的环模强度

在制粒过程中,环模受到压辊对它产生的弯曲应力和接触应力,这两种应力对环模寿命的影响程度如何,本文试作分析。一、弯曲强度 1.受力分析图1中,环模受到压辊对它的挤压力P。

Influential Intensity of Urban Agglomeration on Evolution of Ecoenvironmental Pressure:A Case Study of Changchun,China

In this paper,we study the interactive relationship between the agglomeration of urban elements and the evolution of eco-environmental pressure.We build an index system for evaluating the agglomeration of urban elements and eco-environmental pressure.Using the entropy method and response intensity model,we analyze how urban elements agglomeration influenced eco-environmental pressure in Changchun from 1990 to 2012,eliciting the changing features and influential factors.Ultimately,we conclude there is a significant interactive relationship between the agglomeration of urban elements and the evolution of eco-environmental pressure in Changchun.This is inferred from the degree of this agglomeration in Changchun having increased since 1990,with the degree of eco-environmental pressure first decreasing and then increasing.Alongside this,the impact of urban elements agglomeration on eco-environmental pressure has changed from negative to positive.The main reasons behind this shift are arguably the rapid growth of urban investment and ongoing urbanization.

Century-long variability and trends in daily precipitation characteristics at three Finnish stations

Long-term variations and trends in a wide range of statistics for daily precipitation characteristics in terms of intensity, frequency and duration in Finland were analysed using precipitation records during 1908e2008 from 3 meteorological stations in the south(Kaisaniemi),centre(Kajaani) and north(Sodankyl€a). Although precipitation days in northern part were more frequent than in central and southern parts, daily precipitation intensity in the south was generally higher than those in the centre and north of the country. Annual sum of very light precipitation(0 mm < daily precipitation long-term 50 th percentile of daily precipitation more than 0 mm) significantly( p < 0.05) decreased over time,with the highest rate in northern Finland. These decreasing trends might be the result of significant increases in frequency of days with very light precipitation at all the stations, with the highest and lowest rates in northern and southern Finland, respectively. Ratio of annual total precipitation to number of precipitation days also declined in Finland over 1908e2008, with a decreasing north to south gradient. However, annual duration indices of daily precipitation revealed no statistically significant trends at any station. Daily precipitation characteristics showed significant relationships with various well-known atmospheric circulation patterns(ACPs). In particular, the East Atlantic/West Russia(EA/WR)pattern in summer was the most influential ACP negatively associated with different daily precipitation intensity, frequency and duration indices at all three stations studied.

A cyclic loading model for beam-to-column web connection

A finite element analysis of the beam-to-column web connection with H-shaped columns was performed using the ANSYS computer program. Based on the finite element analysis and theoretical analysis, a simplified model was developed to describe the cyclic loading behavior of beam-to-columns web connection in steel moment resisting frames, considering both bending and shear deformation modes of the beam flange plate. Several issues appearing to merit further researches were identified in the process of developing this model, such as the effect of beam flange plate on beam-to-column web connection stiffness and strength. A reasonable agreement was achieved between model predictions and finite element data, which verified the feasibility of the proposed model.

Strength failure and crack coalescence behavior of sandstone containing single pre-cut fissure under coupled stress, fluid flow and changing chemical environment

In order to study the strength failure and crack coalescence characteristics of cracked rocks, uniaxial compression experiments were conducted on cylindrical sandstone specimens, sampled from Longyou Grottoes of Zhejiang Province, China, with a single pre-cut crack soaking in different chemical solutions. Based on the results of uniaxial compressive test under different chemical solutions and velocities of flow, the effect of strength and deformation characteristics and main modes of crack coalescence for cracked rocks under chemical corrosion were analyzed. The results show that the pH value and velocity of the chemical solutions both have great influence on the sandstone sample's uniaxial compressive strength and deformation characteristics. Cracked sandstone samples are tension-destructed under uniaxial compression, and the crack propagation directions are consistent with the loading direction. The phenomena of crack initiation, propagation and coalescence of sandstone are well observed. Four different crack types are identified based on the crack propagation mechanism by analyzing the ultimate failure modes of sandstone containing a single pre-cut fissure. The failure process of specimen in air is similar with the specimen under chemical solutions, however, the initial time of crack occuring in specimen under chemical solutions is generally earlier than that in the natural specimen, and the crack propagation and coalescence process of specimen under chemical solutions are longer than those of the natural specimen due to softening of structure of rock caused by hydro-chemical action. Immersion velocity of flow and chemical solutions does not have influence on the ultimate modes of crack coalescence.

An Analysis of the Increase of CO2 Emissions in China： Based on an SDA technique

This paper creates an extended import-competitive economy-energy-environmental input/output model and employs a structural decomposition analysis （SDA） approach based on double-layer nested structural formulae to break down China＇s carbon dioxide emissions growth between 1992 and 2007from three perspectives： the overall economy, by-industry and by industrial sectors. Analysis results indicate that the energy intensity effect remains the biggest factor behind carbon emissions reduction. This paper also .found that between 2002 and 2007, China＇s carbon emissions growth obviously accelerated compared to the previous period, which indicates a ＂high carbon＂ tendency in the new round of industrialization. Therefore, in addition to developing a circular economy and clean production, accelerating the phasing out of backward capacities, and developing new energies, China should further encompass the positive role of energy intensity.

Fatigue and Buckling Strength Analysis of the Wing Hinge in the Creo Simulation Environment

This paper provides background information on fatigue and describes the methodology used in Creo Simulation （Pro/Mechanica） fatigue analysis. It covers history and physics of fatigue, the E-N approach-Strain Cycles Includes the effect of mean residual stresses, hysteresis loop capture and rainflow cycle counting. Factors that affect fatigue life include component size, loading type, surface finish, surface treatment and effect of surface treatments on endurance limit. This paper describes practical problem solution and fatigue strength analysis of the wing-hinge to fuselage connection in Creo Simulation （Pro/Mechanica） environment. It also includes a procedure for calculating the buckling load factor and failure index.