期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
环模特性对饲料颗粒成型率影响探究试验 被引量:2
1
作者 张国栋 王红英 +2 位作者 卢红平 张鑫 谭荣英 《饲料工业》 CAS 北大核心 2023年第7期30-34,共5页
为提高饲料颗粒成型率和环模制粒机的制粒效率,结合生产实际,设计了三因素三水平正交试验,探究环模模孔长径比、有效高度和转速对饲料颗粒成型率的影响。结果表明:环模结构中模孔长径比对饲料颗粒成型率影响最大,其次是环模转速,环模高... 为提高饲料颗粒成型率和环模制粒机的制粒效率,结合生产实际,设计了三因素三水平正交试验,探究环模模孔长径比、有效高度和转速对饲料颗粒成型率的影响。结果表明:环模结构中模孔长径比对饲料颗粒成型率影响最大,其次是环模转速,环模高度对饲料颗粒成型率的影响效果最小;饲料颗粒成型率最高的优化组合方案为模孔长径比11、环模转速330 r/min、环模高度130 mm。探究结果可为后续改进制粒机结构、提高饲料颗粒质量、减少制粒机关键部件磨损、降低加工成本提供新视角和新方法。 展开更多
关键词 环模制粒机 环模特性 正交试验 颗粒饲料成型率 模孔长径比 环模转速 环模有效高度
下载PDF
反刍动物颗粒饲料的制作工艺及其影响因素 被引量:2
2
作者 穆阿丽 杨在宾 +1 位作者 崔永华 吕爱军 《现代畜牧兽医》 2004年第12期24-25,共2页
由于饲料的颗粒化处理可以改善饲料的适口性,提高养分的消化和利用率,避免动物挑食,减少饲料浪费,因此用全价颗粒饲料饲喂反刍动物已非常普遍.但是反刍动物颗粒饲料的制作工艺与猪禽饲料的制作工艺存在着一定的差异.本文就影响反刍动物... 由于饲料的颗粒化处理可以改善饲料的适口性,提高养分的消化和利用率,避免动物挑食,减少饲料浪费,因此用全价颗粒饲料饲喂反刍动物已非常普遍.但是反刍动物颗粒饲料的制作工艺与猪禽饲料的制作工艺存在着一定的差异.本文就影响反刍动物饲料制粒的因素及其制作工艺作以简介. 展开更多
关键词 反刍动物 颗粒饲料 制作工艺 原料特性 粉碎粒度 环模特性 调质 压辊特性
下载PDF
Quantum Entanglement and Nonlocality Properties of Two-Mode Squeezed Thermal States in a Common-Reservoir Model 被引量:4
3
作者 向少华 宋克慧 +1 位作者 文伟 施振刚 《Communications in Theoretical Physics》 SCIE CAS CSCD 2011年第2期232-238,共7页
We study a system consisting of two identical non-interacting single-mode cavity fields coupled to a common vacuum environment and provide general, explicit, and exact solutions to its master equation by means of the ... We study a system consisting of two identical non-interacting single-mode cavity fields coupled to a common vacuum environment and provide general, explicit, and exact solutions to its master equation by means of the characteristic function method. We analyze the entanglement dynamics of two-mode squeezed thermal state in this model and show that its entanglement dynamics is strongly determined by the two-mode squeezing parameter and the purity. In particular, we find that two-mode squeezed thermal state with the squeezing parameter r ≤ -(1/2) In √u is extremely fragile and almost does not survive in a common vacuum environment. We investigate the time evolution of nonlocality for two-mode squeezed thermal state in such an environment. It is found that the evolved state loses its nonlocality in the beginning of the evolution, but after a time, the revival of nonlocality can occur. 展开更多
关键词 keytwo-mode squeezed thermal state ENTANGLEMENT Bell's inequality environmental noise
下载PDF
Effect of wall temperature and random distribution of micro organic dust particles on their combustion parameters
4
作者 M.Bidabadi E.Yaghoubi +2 位作者 M.Harati Gh.Shahryari B.Akhoondian 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第10期3888-3899,共12页
The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is nec... The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is necessary to present a model to describe the combustion process in these technologies. Recirculation phenomenon is evaluated by entering the exhausted heat from the post flam zone into the preheat zone. In this work, for modeling of random situation at the flame front, the source term in the equation of energy was modeled considering random situation for volatizing of particles in preheat zone. The comparison of obtained results from the proposed model by experimental data regards that the random model has a better agreement with experimental data than non-random model. Also, according to the results obtained by this model, wall temperature affects the amount of heat recirculation directly and higher values of wall temperature will lead to higher amounts of burning velocity and flame temperature. 展开更多
关键词 random combustion recirculation micro organic particle effective equivalence ratio flame temperature burning velocity
下载PDF
Study on coupled vibration characteristics of a cylindrical container with multiple elastic annular baffles 被引量:2
5
作者 WANG JiaDong ZHOU Ding LIU WeiQing 《Science China(Technological Sciences)》 SCIE EI CAS 2012年第12期3292-3301,共10页
The coupled vibration characteristics of multiple elastic annular baffles of the same inner radius in a partially liquid-filled rigid cylindrical container were studied. The liquid domain was divided into several simp... The coupled vibration characteristics of multiple elastic annular baffles of the same inner radius in a partially liquid-filled rigid cylindrical container were studied. The liquid domain was divided into several simple sub-domains so that the liquid velocity potential in each liquid sub-domain was of class C 1 with continuous boundary conditions. Based on the superposition principle, the general solution of the liquid velocity potential corresponding to each liquid sub-domain was obtained by means of the method of separation of variables. The coupled modes of the multiple elastic annular baffles were expressed in terms of dry-modal functions. The free surface condition, the interface conditions and coupled vibration conditions were expressed in terms of Fourier series along the liquid height and Bessel series in the radial direction, respectively. Stable and fast numerical computations were investigated by the convergence study. Excellent agreements have been achieved in the comparison of re- suits obtained by the proposed approach with those given by the finite element software ADINA. The natural frequencies and mode shapes versus the position, the inner radius and the number of the annular baffles were thoroughly discussed. 展开更多
关键词 liquid-container interaction sub-domains multiple baffles sloshing mode bulging mode
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部