Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crossl...Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crosslinked with waterborne isocyanate curing agent, which was used to form waterborne HEP/acrylic polyurethane composite （HEP-APU） coatings on Q235 steel surfaces. Electrochemical impedance spectroscopy and polarization curves were applied to analyze the corrosion behavior of the HEP-APU coatings in 3.5wt% NaCl solutions. The results indicated that the HEP-APU coatings show a superior passivation property and efficient corrosion protection of Q235 steel. The waterborne acrylic polyurethane coating containing 0.5wt% HEP exhibited the best corrosion performance among all the coating specimens. The improved flash-rust resistance can be attributed to the introduction of the phosphate group which could form phosphate film on the steel substrate.展开更多
We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through s...We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through spin-coating onto highly n-doped silicon （n-Si） wafers for constructing devices of dielectric measurements, on which the dielectric properties and I-V characteristics of PbMA were studied. PbMA has a much lower dielectric constant （lower than 2.6） in the frequency range of 10-105 Hz, and better thermal stability than PMMA does. I-V data showed that the metal/PbMA/n-Si devices have different conducting directions, depending on whether Au or Al deposited over PbMA layers.展开更多
文摘Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crosslinked with waterborne isocyanate curing agent, which was used to form waterborne HEP/acrylic polyurethane composite （HEP-APU） coatings on Q235 steel surfaces. Electrochemical impedance spectroscopy and polarization curves were applied to analyze the corrosion behavior of the HEP-APU coatings in 3.5wt% NaCl solutions. The results indicated that the HEP-APU coatings show a superior passivation property and efficient corrosion protection of Q235 steel. The waterborne acrylic polyurethane coating containing 0.5wt% HEP exhibited the best corrosion performance among all the coating specimens. The improved flash-rust resistance can be attributed to the introduction of the phosphate group which could form phosphate film on the steel substrate.
基金This work was supported by the National Natural Science Foundation of China （No.51673181）.
文摘We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through spin-coating onto highly n-doped silicon （n-Si） wafers for constructing devices of dielectric measurements, on which the dielectric properties and I-V characteristics of PbMA were studied. PbMA has a much lower dielectric constant （lower than 2.6） in the frequency range of 10-105 Hz, and better thermal stability than PMMA does. I-V data showed that the metal/PbMA/n-Si devices have different conducting directions, depending on whether Au or Al deposited over PbMA layers.
