期刊文献+
共找到17篇文章
< 1 >
每页显示 20 50 100
环氧基体与竹节状有机纤维之间的界面性能研究 被引量:4
1
作者 蔡长庚 许家瑞 《玻璃钢/复合材料》 CAS CSCD 2002年第3期22-26,共5页
本文采用单丝拔出试验和动态力学分析研究了环氧树脂基复合材料中基体与竹节状有机短纤维之间的界面特性。有关的试验结果表明 :在弱界面结合的条件下 ,由于在竹节状有机短纤维中凸节的存在 ,可以提高纤维与基体之间的界面结合强度 ,也... 本文采用单丝拔出试验和动态力学分析研究了环氧树脂基复合材料中基体与竹节状有机短纤维之间的界面特性。有关的试验结果表明 :在弱界面结合的条件下 ,由于在竹节状有机短纤维中凸节的存在 ,可以提高纤维与基体之间的界面结合强度 ,也有利于纤维末端界面剪切应力的传递。 展开更多
关键词 环氧基体 竹节状 有机纤维 界面性能 研究 氧树脂 复合材料 界面粘结
下载PDF
无溶剂耐高温环氧基体树脂的制备及性能研究 被引量:8
2
作者 童超梅 虞鑫海 +2 位作者 陈吉伟 刘万章 唐新发 《绝缘材料》 CAS 北大核心 2016年第2期18-21,27,共5页
采用芳香族二元胺DADP-30对马来酰亚胺树脂(TMI)进行扩链改性,然后与多官能团环氧树脂(TGBAPOPP)反应,再加入CE-793-250活性稀释剂、甲基四氢苯酐(MTHPA)固化剂搅拌混合均匀,制得了一种无溶剂耐高温环氧基体树脂。对其黏度、凝胶化时间... 采用芳香族二元胺DADP-30对马来酰亚胺树脂(TMI)进行扩链改性,然后与多官能团环氧树脂(TGBAPOPP)反应,再加入CE-793-250活性稀释剂、甲基四氢苯酐(MTHPA)固化剂搅拌混合均匀,制得了一种无溶剂耐高温环氧基体树脂。对其黏度、凝胶化时间、表面能、吸水率等进行了研究。结果表明:该环氧基体树脂的综合性能优越,特别是在高温环境下其拉伸剪切强度优异,在240℃时拉伸剪切强度高达19.4 MPa。 展开更多
关键词 马来酰亚胺(TMI) 环氧基体树脂 耐高温 无溶剂
下载PDF
热塑性树脂改性环氧基体配方研究 被引量:36
3
作者 王晓洁 张炜 谢群炜 《宇航材料工艺》 CAS CSCD 北大核心 1999年第2期21-23,共3页
对热塑性树脂聚醚酮(PEK)改性环氧体系进行了探索性研究,结果表明,E—51/PEK体系有一定增韧效果,且耐热性没有下降,并对该共混体系的微观结构进行分析,从理论上初步分析了该共混体系的机理。QJ1#环氧/PEK共混... 对热塑性树脂聚醚酮(PEK)改性环氧体系进行了探索性研究,结果表明,E—51/PEK体系有一定增韧效果,且耐热性没有下降,并对该共混体系的微观结构进行分析,从理论上初步分析了该共混体系的机理。QJ1#环氧/PEK共混体系中,PEK树脂包裹环氧树脂球形颗粒形成了网络—球粒结构,这种结构有一定的增韧效果。 展开更多
关键词 氧树脂 热塑性树脂 增韧 共混 环氧基体 配方
下载PDF
采用低黏度添加剂的环氧树脂增韧体系
4
作者 RussellJvarley 袁才登 《网络聚合物材料通讯》 2005年第1期7-12,共6页
本研究对3种低黏度添加剂作为2种环氧树脂体系增韧剂的性能进行了评价,2种环氧树脂体系1种为低活性的双酚A二缩水甘油醚(DGEBA)与胺类固化剂二乙基甲苯二胺体系,另1种为四缩水甘油基亚甲基二苯胺(TGDDM)环氧树脂与脂环族二胺类固化剂... 本研究对3种低黏度添加剂作为2种环氧树脂体系增韧剂的性能进行了评价,2种环氧树脂体系1种为低活性的双酚A二缩水甘油醚(DGEBA)与胺类固化剂二乙基甲苯二胺体系,另1种为四缩水甘油基亚甲基二苯胺(TGDDM)环氧树脂与脂环族二胺类固化剂体系,所评价的增韧剂分别是端环氧基脂肪族聚酯型超支化聚合物、端羧基聚丁橡胶和端氧丙基硅氧烷。研究结果表明:端环氧基超支化聚酯可有效增韧低交联度的环氧树脂体系,即DGEBA基树脂体系,其最大的特点是添加剂对树脂体系的加工参数如黏度和凝胶时间无影响,当添加剂质量分数为15%时材料的断裂性能提高54%,同时对固化物的Tg无影响,该结果应归因于相分离产生的多相微粒形态能诱发粒子气穴化,同时使残余环氧树脂基本不溶解到固化后的连续环氧树脂基体中;橡胶类添加剂也可达到相同水平的增韧效果,但却会导致Tg下降10~20℃、初始黏度上升30%;硅氧烷类添加剂不能提高DGEBA基树脂体系的韧性,因为硅氧烷在环氧基体中分散性很差;对于TGDDM基树脂体系,3种添加剂均不能起到增韧作用。因为该环氧体系交联度过高而缺乏塑性形变。 展开更多
关键词 添加剂 黏度 增韧 氧树脂 二乙基甲苯二胺 胺类固化剂 二缩水甘油醚 超支化聚合物 缩水甘油基 丙基硅氧烷 超支化聚酯 氧树脂基 研究结果 凝胶时间 加工参数 断裂性能 质量分数 树脂基 增韧效果 环氧基体
下载PDF
含氨基聚硅氧烷改性环氧树脂 被引量:12
5
作者 郑钦健 李航昱 +2 位作者 陈少鹏 俞小春 林国良 《厦门大学学报(自然科学版)》 CAS CSCD 北大核心 2005年第3期399-402,共4页
采用八甲基环四硅氧烷(D4 )、甲基二乙氧基乙二胺丙基硅烷(DL 602)为单体,以六甲基二硅氧烷(MM)为封端剂合成不同粘度的侧氨基聚硅氧烷(SAPS),并用合成的侧氨基聚硅氧烷来改性环氧树脂(E 44),制备一系列的样品.通过动态机械热分析(DMTA... 采用八甲基环四硅氧烷(D4 )、甲基二乙氧基乙二胺丙基硅烷(DL 602)为单体,以六甲基二硅氧烷(MM)为封端剂合成不同粘度的侧氨基聚硅氧烷(SAPS),并用合成的侧氨基聚硅氧烷来改性环氧树脂(E 44),制备一系列的样品.通过动态机械热分析(DMTA)、接触角仪、电子拉力试验机以及扫描电镜(SEM)对其进行研究.结果表明对于含固定侧氨基比例的聚硅氧烷,其与环氧树脂的相容性随着聚硅氧烷的粘度先增大后减小;含侧氨基聚硅氧烷能有效增韧环氧树脂,而且SAPS粘度越大,被改性的环氧基体的抗冲击强度就越高. 展开更多
关键词 氨基聚硅氧烷 改性氧树脂 扫描电镜(SEM) 八甲基四硅氧烷 六甲基二硅氧烷 动态机械热分析 电子拉力试验机 抗冲击强度 环氧基体 SAPS 粘度 封端剂 乙二胺 氧基 接触角 相容性 合成 硅烷 丙基 增韧
下载PDF
聚吡咯/SiO_2作导电助剂的水性环氧抗静电涂料的制备 被引量:10
6
作者 许均 曾幸荣 +1 位作者 苏海霞 马文石 《涂料工业》 CAS CSCD 2005年第6期30-33,63,共5页
以导电性聚吡咯/二氧化硅(PPy/SiO2)复合材料作导电助剂,与环氧树脂乳液混合,经聚酰胺X-650固化后,制备了电导率在10-9~10-4S·cm-1之间的水性环氧抗静电涂料。结果表明:PPy/SiO2用量为环氧乳液的2%(质量分数,下同)时,环氧涂层的... 以导电性聚吡咯/二氧化硅(PPy/SiO2)复合材料作导电助剂,与环氧树脂乳液混合,经聚酰胺X-650固化后,制备了电导率在10-9~10-4S·cm-1之间的水性环氧抗静电涂料。结果表明:PPy/SiO2用量为环氧乳液的2%(质量分数,下同)时,环氧涂层的电导率可从10-16S·cm-1提高到1.2×10-9S·cm-1,而且PPy/SiO2用量低于8%时,涂层具有良好的综合性能,对玻璃和马口铁附着力为1级,耐冲击性大于50cm,铅笔硬度H,耐水性和柔韧性优良。SEM观察结果表明:PPy/SiO2在环氧涂层中具有良好的分散性,且与环氧基体结合比较紧密。 展开更多
关键词 抗静电涂料 SiO2 聚吡咯 制备 助剂 氧树脂乳液 氧涂层 SEM观察 复合材料 二氧化硅 质量分数 氧乳液 综合性能 耐冲击性 环氧基体 电导率 导电性 聚酰胺 附着力 柔韧性 耐水性 分散性 用量 混合 固化 玻璃
下载PDF
用于风力机叶片的先进环氧技术
7
作者 史兴华 《玻璃钢》 2010年第3期29-32,共4页
环氧复合材料在许多要求高的应用中(比如风力机叶片部件)提供了高性能和已被证实的可靠性。在发展对风力机叶片复合材料破坏的基本认识,以及提供新颖的方案来同时解决破坏和生产率问题上,Dow公司取得了显著进展。
关键词 风力机叶片 复合材料 生产率 环氧基体 嵌段共聚物 镶嵌共聚物 增韧技术 第二相
下载PDF
汉高日本公司推出新型聚氨酯类基体树脂LoctiteMAX3产品
8
《聚氨酯工业》 2014年第3期40-40,共1页
汉高日本公司(Henkel Japan)将开始向日本市场供应用于纤维增强复合树脂(FPR)的新型聚氨酯类基体树脂“LDctite MAX3”产品,该聚氨酯类基体树脂Loctite MAX3在高温下粘度较低,树脂本身的固化速度比环氧树脂快,与环氧基体树脂相... 汉高日本公司(Henkel Japan)将开始向日本市场供应用于纤维增强复合树脂(FPR)的新型聚氨酯类基体树脂“LDctite MAX3”产品,该聚氨酯类基体树脂Loctite MAX3在高温下粘度较低,树脂本身的固化速度比环氧树脂快,与环氧基体树脂相比可缩短RTM(Resin Transfer Molding,树脂传递成型)工艺的成形时间,且更容易渗入到纤维材料中。 展开更多
关键词 树脂 聚氨酯类 日本市场 产品 复合树脂 纤维增强 氧树脂 环氧基体
下载PDF
结构阻尼复合材料的研究及制备工艺 被引量:3
9
作者 许砚琦 《航空制造技术》 2011年第15期75-77,共3页
具有阻尼减振功能的纤维增强复合材料在提供承载能力的同时,还能把振动能吸收并转化为其他形式的能量而耗散掉,从而减少机械振动和噪声。由于纤维增强复合材料具有较高的比强度、比模量,与同类型金属减振结构(如铝合金)相比其结构重量... 具有阻尼减振功能的纤维增强复合材料在提供承载能力的同时,还能把振动能吸收并转化为其他形式的能量而耗散掉,从而减少机械振动和噪声。由于纤维增强复合材料具有较高的比强度、比模量,与同类型金属减振结构(如铝合金)相比其结构重量可减重20%~40%。 展开更多
关键词 复合材料制件 机械振动 噪声 比强度 噪音 极限应力比 纤维增强复合材料 阻尼因子 阻尼减振 阻尼复合材料 碳纤维 碳化纤维 人造无机纤维 环氧基体 阻尼特性 聚合物基 树脂基 阻尼材料 测试频率 制备工艺 插层 阻尼机理
下载PDF
过期单向预浸料在无人机上的应用研究 被引量:1
10
作者 赵伟超 赵景丽 段国晨 《中国胶粘剂》 CAS 北大核心 2019年第5期41-44,共4页
分别比较了不同条件下UD(单向预浸料)在0.6 MPa下热压罐成型样件的综合力学性能及耐热性。研究结果表明:未超过累计暴露期的UD在一定过期时间内,其性能变化对产品质量的可靠性和稳定性无明显影响;超出该时间后,对产品质量会产生明显影响。
关键词 环氧基体 预浸料 中温固化 过期 无人机
下载PDF
Effects of Solvent and Impurity on Crystal Habit Modification of 11α-Hydroxy-16α,17α-epoxyprogesterone 被引量:2
11
作者 聂强 王静康 +1 位作者 王永莉 鲍颖 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2007年第5期648-653,共6页
The effects of solvent and impurity on the crystal habit of 11α-hydroxy-16α,17α-epoxyprogesterone (HEP)grown from solution were studied by scanning electron microscope.Long prismatic crystals were produced when HEP... The effects of solvent and impurity on the crystal habit of 11α-hydroxy-16α,17α-epoxyprogesterone (HEP)grown from solution were studied by scanning electron microscope.Long prismatic crystals were produced when HEP was crystallized from pure acetone and N,N-dimethylformamide,while blocky crystals were produced from pure chloroform by cooling crystallization.One kind of isomorphic impurity,16α,17α-epoxyprogesterone(EP) was selected to examine its effect on the HEP crystal habit.When the content of EP in the mother liquor is very high(55.45%,solvent free basis),the habit of produced HEP crystals was greatly modified from prismatic to octa-hedral.The differential scanning calorimetry and X-ray powder diffraction analyses showed that the change of crystal habit was originated from the crystal structure modification. 展开更多
关键词 crystal habit crystal structure crystal growth 11α-hydroxy-16α 17α-epoxyprogesterone
下载PDF
Lysophosphatidic acid transactivates both c-Met and epidermal growth factor receptor, and induces cyclooxygenase-2 expression in human colon cancer LoVo cells 被引量:5
12
作者 Joji Kitayama Hironori Yamaguchi +3 位作者 Hiroharu Yamashita Ken Mori Toshiaki Watanabe Hirokazu Nagawa 《World Journal of Gastroenterology》 SCIE CAS CSCD 2005年第36期5638-5643,共6页
AIM: To examine whether lysophosphatidic acid (LPA) induces phosphorylation of c-Met and epidermal growth factor receptor (EGFR), both of which have been proposed as prognostic markers of colorectal cancer, and w... AIM: To examine whether lysophosphatidic acid (LPA) induces phosphorylation of c-Met and epidermal growth factor receptor (EGFR), both of which have been proposed as prognostic markers of colorectal cancer, and whether LPA induces cyclooxygenase-2 (COX-2) expression in human colon cancer cells. METHODS: Using a human colon cancer cell line, LoVo cells, we performed immunoprecipitation analysis, followed by Western blot analysis. We also examined whether LPA induced COX-2 expression, by Western blot analysis. RESULTS: Immunoprecipitation analysis revealed that 10 μmol/L LPA induced tyrosine phosphorylation of c-Met and EGFR in LoVo cells within a few minutes. We found that c-Met tyrosine phosphorylation induced by LPA was not attenuated by pertussis toxin or a matrix metalloproteinase inhibitor, in marked contrast to the results for EGFR. In addition, 0.2-40 IJmol/L LPA induced COX-2 expression in a dose-dependent manner. CONCLUSION: Our results suggest that LPA acts upstream of various receptor tyrosine kinases (RTKs) and COX-2, and thus may act as a potent stimulator of colorectal cancer. 2005 The WJG Press and Elsevier Inc. All rights reserved. 展开更多
关键词 Lysophosphatidic acid C-MET EGFR TRANSACTIVATION CYCLOOXYGENASE-2 Colon cancer
下载PDF
The effects of interfering in COX-2 gene expression on malignant proliferation of the human lung adenocarcinoma A2 cell in vitro 被引量:1
13
作者 Weiying Li Hui Wang Baitang Lai Xuehui Yang Chunyan Zhang 《The Chinese-German Journal of Clinical Oncology》 CAS 2009年第9期498-503,共6页
Objective:We explored the interfering effect of COX-2 gene expression and the influence on the malignant proliferation of A2 cells by RNAi after quenching COX-2 in vitro. Methods:COX-2 was selected as the subject. Thr... Objective:We explored the interfering effect of COX-2 gene expression and the influence on the malignant proliferation of A2 cells by RNAi after quenching COX-2 in vitro. Methods:COX-2 was selected as the subject. Three COX-2 siRNA expression vectors with human U6 promoter were constructed and three vectors and the vacant vector (pEGFP) were transfected into A2 cells with lipofectamine respectively. The cell strains transfected were constructed. The change of COX-2 expression levels was examined by Western blot and RT-PCR. The effects on the proliferation of A2 cells after silencing COX-2 were studied by cell growth curve and clonogenic assay in vitro. Results: The three siRNA and U6 promoter cloned into pEGFP plasmid were validated by PCR, restriction endonucleases identification, DNA sequencing and BLAST alignment. The cell strains transfected were named as A2-3, A2-7, A2-10 and A2-p respectively. Green fluorescence was seen in A2-p cells and not in A2-3, A2-7 and A2-10 cells in 24, 48 and 72 h after transfected. The results of RT-PCR and Western blot showed the three siRNA expression vectors produced effects and the expression of COX-2 was inhibited in different extent. In contrast to A2 cells, the levels of COX-2 mRNA of A2-3, A2-7 and A2-10 cells reduced 15.6%, 20.4% and 64.2% respectively; the levels of COX-2 protein of A2-3, A2-7 and A2-10 cells reduced 23.7%, 36.7% and 60.2% respectively. The results of cell growth curve and clonogenic assay showed the growth of A2-10 cell slowed and the colonial formation rate reduced but the growth of A2-3 and A2-7 cells had not obvious changes in contrast to the controls (A2 and A2-p). Conclusion: Silencing the COX-2 gene in vitro by RNAi technique can significantly inhibit the malignant proliferation of A2 cells. 展开更多
关键词 COX-2 RNAI malignant proliferation in vitro
下载PDF
Cobalt carbonyl ionic liquids based on the 1,1,3,3-tetra-alkylguanidine cation:Novel, highly efficient, and reusable catalysts for the carbonylation of epoxides 被引量:2
14
作者 Wei Zhang Feng Han +2 位作者 Jin Tong Chungu Xia Jianhua Liu 《Chinese Journal of Catalysis》 EI CSCD 北大核心 2017年第5期805-812,共8页
A series of novel cobalt carbonyl ionic liquids based on1,1,3,3‐tetra‐alkyl‐guanidine,such as[1,1‐dimethyl‐3,3‐diethylguanidinium][Co(CO)4](3a),[1,1‐dimethyl‐3,3‐dibutylguanidinium][Co(CO)4](3b),[1,1‐dimethy... A series of novel cobalt carbonyl ionic liquids based on1,1,3,3‐tetra‐alkyl‐guanidine,such as[1,1‐dimethyl‐3,3‐diethylguanidinium][Co(CO)4](3a),[1,1‐dimethyl‐3,3‐dibutylguanidinium][Co(CO)4](3b),[1,1‐dimethyl‐3,3‐tetramethyleneguanidinium][Co(CO)4](3c),and[1,1‐dimethyl‐3,3‐pentamethyleneguanidinium][Co(CO)4](3d),were synthesized in good yields and were also characterized using infrared spectroscopy,ultraviolet‐visible spectroscopy,1H nuclear magnetic resonance(NMR)spectroscopy,13C NMR spectroscopy,high‐resolution mass spectrometry,differential scanning calorimetry,and thermogravimetric analysis.The four compounds exhibited high thermal and chemical stability.In addition,the catalytic performance of these compounds was investigated in the carbonylation of epoxides,with3a exhibiting the best catalytic activity without the aid of a base as the additive.The catalyst could be reused at least six times without significant decreases of the selectivity or conversion rate.Moreover,the catalyst system exhibited good tolerance with terminal epoxides bearing alkyl,alkenyl,aryl,alkoxy,and chloromethyl functional groups. 展开更多
关键词 Cobalt carbonyl ionic liquid CARBONYLATION EPOXIDE Tetra‐alkylguanidine RECYCLABILITY
下载PDF
The Versatile Method to Control the Orientation of BN Particles in Thermoset Matrix
15
作者 Karnthidapom Wattanakul Sittisak Satasit 《Journal of Chemistry and Chemical Engineering》 2012年第9期769-773,共5页
A new thermally conductive thermoset composite has been developed. A hybrid organic-inorganic material composed of an epoxy resin crosslinked with a flexible diamine hardener, and a BN, was prepared by incorporating e... A new thermally conductive thermoset composite has been developed. A hybrid organic-inorganic material composed of an epoxy resin crosslinked with a flexible diamine hardener, and a BN, was prepared by incorporating epoxy structure units covalently into a BN via the sol-gel approach. The precursor was obtained by the reaction of DGEBA (diglycidyl ether of bisphenol A) with TEOS (tetraethyl orthosilicate). The precursor was then hydrolyzed and co-condensated with tetraethyl orthosilicate which is covalently bond with the hydroxyl groups on the BN surface at room temperature to yield epoxy-BN hybrid sol-gel material. FTIR spectroscopy confirmed the formation of organic and inorganic network. The thermal conductivity as measured by thermal conductive analyzer showed an increase up to 0.4048 W/m.K, for a mixture containing 0.4 wt% of BN fillers in the epoxy matrix. Moreover, the optimum conditions for surface modification of BN particle were also investigated. 展开更多
关键词 BN filled-epoxy composite particle orientation chemical modification of epoxy sol-gel method inorganic-organichybrid.
下载PDF
Catalytic Oxidation of Cyclohexane over ZSM-5 Catalyst in N-alkyl-N-methylimidazolium Ionic Liquids
16
作者 胡永琪 王建英 +3 位作者 赵瑞红 刘玉敏 刘润静 李永丹 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2009年第3期407-411,共5页
Heterogeneous oxidation of cyclohexane by tert-butyl hydroperoxide (TBHP) was carried out over ZSM-5 catalysts with different Si/Al ratios in ionic liquids and organic molecular solvents. Higher yield and selec-tivity... Heterogeneous oxidation of cyclohexane by tert-butyl hydroperoxide (TBHP) was carried out over ZSM-5 catalysts with different Si/Al ratios in ionic liquids and organic molecular solvents. Higher yield and selec-tivity of the desired products were found in ionic liquids than in molecular solvents. The conversion of cyclohexane exhibits a decrease from 15.8% to 10.8% with the increase of Si/Al ratio of the HZSM-5 catalyst, and all the cata-lysts exhibit good selectivity of monofunctional oxidation products at around 97%. The activity of catalyst is found strongly dependent on the alkyl chain length of ionic liquid. 展开更多
关键词 ionic liquid cyclohexane oxidation ZSM-5 CATALYSIS
下载PDF
基于纤维束/环氧树脂复合材料试验的单向层合板横向拉伸强度预测方法 被引量:6
17
作者 李稳 陈蔚 +3 位作者 汤立群 蒋震宇 刘泽佳 刘逸平 《复合材料学报》 EI CAS CSCD 北大核心 2018年第2期340-346,共7页
实验研究表明,纤维束/环氧树脂复合材料试件的横向拉伸强度与工程上常用的单向层合板横向拉伸强度在趋势上具有很好的相关性,但是数值上存在一定差距。本文使用两种碳纤维和两种环氧树脂制备了三种纤维束/环氧树脂复合材料和单向层合板... 实验研究表明,纤维束/环氧树脂复合材料试件的横向拉伸强度与工程上常用的单向层合板横向拉伸强度在趋势上具有很好的相关性,但是数值上存在一定差距。本文使用两种碳纤维和两种环氧树脂制备了三种纤维束/环氧树脂复合材料和单向层合板,并分别测量了纤维束/环氧树脂复合材料和单向层合板的横向拉伸强度,以及环氧基体的拉伸强度。在实验基础上,应用Griffith断裂强度理论建立了纤维束/环氧树脂复合材料和单向层合板的横向拉伸强度的关系模型,通过两种复合材料实验的结果拟合了该模型中的参数。利用第三种复合材料实验进行校验,发现该模型预测的单向层合板横向拉伸强度与实测强度之间达到很好的一致性,相对偏差为9%。采用本文提出的方法,可以用较为简单的纤维束/环氧树脂复合材料和环氧基体拉伸试验预测单向层合板的横向拉伸强度。 展开更多
关键词 纤维束/氧树脂复合材料 环氧基体 单向层合板 横向拉伸强度 强度模型
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部