Green oxidation of cyclohexene using dioxygen as oxidizing agent is highly desirable because of its environmental compatibility and economic impact. Separation of its oxidation products depends on the reliable vaporli...Green oxidation of cyclohexene using dioxygen as oxidizing agent is highly desirable because of its environmental compatibility and economic impact. Separation of its oxidation products depends on the reliable vaporliquid equilibrium （VLE） data of relevant components, which are still lacking. The VLE data of binary system 1,2-epoxycyclohexane and 2-cyclohexen-l-one under ambient pressure were obtained using an improved VLE equipment EC-2 still in this work. The results showed that this binary system has no azeotropic point. Furthermore, the experimental VLE data were correlated with the Wilson thermodynamic model and the corresponding binary interaction parameters of the model were obtained. The results showed that the VLE data agreed well with the model and passed the thermodynamic consistency test of Herrington.展开更多
Molybdenum (VI) complex, namely molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] used as epoxidation catalyst species, was synthesized and characterized by elemental analysis and infrared spectrum. Polystyrene-supp...Molybdenum (VI) complex, namely molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] used as epoxidation catalyst species, was synthesized and characterized by elemental analysis and infrared spectrum. Polystyrene-supported molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] for synthesis of epoxycyclohexane was prepared by phase transfer catalysis method. Effects of various factors in synthesis of epoxycyclohexane by reaction of cyclohexene and t-BuOOH in the atmosphere of nitrogen catalyzed by polystyrene-supported MoO2(acac)2 were also investigated. Under the following conditions, n(cyclohexene):n(t-BuOOH)=3.5:l (based on 0.1 mol of t-BuOOH), volume of solvent -10ml, reaction temperature -80℃, reaction time -60min, and mass of molybdenum in the catalyst -2.30×0^(-3)g, the yield of epoxycyclohexane on the basis of t-BuOOH is over 99.5%, and the purity of epoxycyclohexane is about 99.9% by gas chromatogram(GC) analysis.展开更多
Many by-products are generated in the process of oxidizing cyclohexene to produce 1,2-epoxycyclohexane by hydrogen peroxide, including cyclohexanol, cyclohexanone, etc. To obtain high-purity 1,2-epoxycyclohexane, the ...Many by-products are generated in the process of oxidizing cyclohexene to produce 1,2-epoxycyclohexane by hydrogen peroxide, including cyclohexanol, cyclohexanone, etc. To obtain high-purity 1,2-epoxycyclohexane, the by-products must be removed through rectification. Refining 1,2-epoxycyclohexane through rectification requires vapor-liquid equilibrium(VLE) data of the related system. Therefore, the VLE data of 1,2-epoxycyclohexane- cyc-lohexanone system were measured at 101.3 kPa using an improved EC-2 VLE still. The thermodynamic consistency of the data was then tested by Herington's method and the rigorous point-to-point method. The results obtained were exemplary. The VLE data were correlated by the Wilson and non-random two-liquid(NRTL) equations, using the error sum squares of the vapor composition as the objective function to obtain the model parameters. The difference between the calculated values and the experimental data is minor, indicating that the VLE data are suitable for engineering design.展开更多
A novel silica-supported resin with a cyclic monoamide of polymerized 4-acryloylmorpholine(Silica-AM) was synthesized, and adsorptivity to metal ions of major fission products(FP) was examined in HNO3 and HCl solution...A novel silica-supported resin with a cyclic monoamide of polymerized 4-acryloylmorpholine(Silica-AM) was synthesized, and adsorptivity to metal ions of major fission products(FP) was examined in HNO3 and HCl solutions. Silica-AM has a carbonyl oxygen atom outside of the 6-membered morpholine ring, and a cyclic structure that is different than other cyclic monoamide resins we have studied. These include polyvinylpolypyrrolidone(PVPP) and poly-N-vinyl-ε-caprolactam(VEC), both of which have coordinative carbonyl groups included in the ring. Silica-AM was similar to a cyclic monoamide we have reported because it exhibited adsorption to Pd(Ⅱ) and Re(VⅡ) in HNO3 of a particularly low concentration range. Silica-AM has an ether oxygen atom included in the ring as well. Considering the difference in the chemical structures of Silica-AM and other cyclic monoamide resins, it was suggested that oxygen atoms in the carbonyl group and in ether may be main contributors to Silica-AM's respective adsorptions to Pd(Ⅱ) and Re(VⅡ), and Mo(VI) and Zr(IV). Our results imply that the contribution of the two types of oxygen atoms to adsorption is more observable in an HCl system. The contribution of the ether oxygen atom to the adsorption of Pd(Ⅱ) was also suggested from our study on crystal prepared from 4-acetylmorpholine and palladium nitrate.展开更多
基金Supported by Outstanding Personality Innovation Funds of Henan Province (0121001900)
文摘Green oxidation of cyclohexene using dioxygen as oxidizing agent is highly desirable because of its environmental compatibility and economic impact. Separation of its oxidation products depends on the reliable vaporliquid equilibrium （VLE） data of relevant components, which are still lacking. The VLE data of binary system 1,2-epoxycyclohexane and 2-cyclohexen-l-one under ambient pressure were obtained using an improved VLE equipment EC-2 still in this work. The results showed that this binary system has no azeotropic point. Furthermore, the experimental VLE data were correlated with the Wilson thermodynamic model and the corresponding binary interaction parameters of the model were obtained. The results showed that the VLE data agreed well with the model and passed the thermodynamic consistency test of Herrington.
基金Supported by the Outstanding Personality Innovation Funds of Henan Province(No.0121001900).
文摘Molybdenum (VI) complex, namely molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] used as epoxidation catalyst species, was synthesized and characterized by elemental analysis and infrared spectrum. Polystyrene-supported molybdenum dioxobis(2,4-pentanedione) [MoO2(acac)2] for synthesis of epoxycyclohexane was prepared by phase transfer catalysis method. Effects of various factors in synthesis of epoxycyclohexane by reaction of cyclohexene and t-BuOOH in the atmosphere of nitrogen catalyzed by polystyrene-supported MoO2(acac)2 were also investigated. Under the following conditions, n(cyclohexene):n(t-BuOOH)=3.5:l (based on 0.1 mol of t-BuOOH), volume of solvent -10ml, reaction temperature -80℃, reaction time -60min, and mass of molybdenum in the catalyst -2.30×0^(-3)g, the yield of epoxycyclohexane on the basis of t-BuOOH is over 99.5%, and the purity of epoxycyclohexane is about 99.9% by gas chromatogram(GC) analysis.
基金Supported by the Key Scientific and Technology Project of Henan Province(132102210050)
文摘Many by-products are generated in the process of oxidizing cyclohexene to produce 1,2-epoxycyclohexane by hydrogen peroxide, including cyclohexanol, cyclohexanone, etc. To obtain high-purity 1,2-epoxycyclohexane, the by-products must be removed through rectification. Refining 1,2-epoxycyclohexane through rectification requires vapor-liquid equilibrium(VLE) data of the related system. Therefore, the VLE data of 1,2-epoxycyclohexane- cyc-lohexanone system were measured at 101.3 kPa using an improved EC-2 VLE still. The thermodynamic consistency of the data was then tested by Herington's method and the rigorous point-to-point method. The results obtained were exemplary. The VLE data were correlated by the Wilson and non-random two-liquid(NRTL) equations, using the error sum squares of the vapor composition as the objective function to obtain the model parameters. The difference between the calculated values and the experimental data is minor, indicating that the VLE data are suitable for engineering design.
文摘A novel silica-supported resin with a cyclic monoamide of polymerized 4-acryloylmorpholine(Silica-AM) was synthesized, and adsorptivity to metal ions of major fission products(FP) was examined in HNO3 and HCl solutions. Silica-AM has a carbonyl oxygen atom outside of the 6-membered morpholine ring, and a cyclic structure that is different than other cyclic monoamide resins we have studied. These include polyvinylpolypyrrolidone(PVPP) and poly-N-vinyl-ε-caprolactam(VEC), both of which have coordinative carbonyl groups included in the ring. Silica-AM was similar to a cyclic monoamide we have reported because it exhibited adsorption to Pd(Ⅱ) and Re(VⅡ) in HNO3 of a particularly low concentration range. Silica-AM has an ether oxygen atom included in the ring as well. Considering the difference in the chemical structures of Silica-AM and other cyclic monoamide resins, it was suggested that oxygen atoms in the carbonyl group and in ether may be main contributors to Silica-AM's respective adsorptions to Pd(Ⅱ) and Re(VⅡ), and Mo(VI) and Zr(IV). Our results imply that the contribution of the two types of oxygen atoms to adsorption is more observable in an HCl system. The contribution of the ether oxygen atom to the adsorption of Pd(Ⅱ) was also suggested from our study on crystal prepared from 4-acetylmorpholine and palladium nitrate.
