This paper focuses on the key technologies of P2P and network traffic monitoring, research and analyze the traditional P2P flow control technology and the working principle of deployment, discuss on the straight loss ...This paper focuses on the key technologies of P2P and network traffic monitoring, research and analyze the traditional P2P flow control technology and the working principle of deployment, discuss on the straight loss and bypass interference control technology, and the reasonable combination of two kinds of technology to design straight bypass joint deployment. On basis of it, we design a new P2P traffic monitoring system. Through the design and implementation of computer network traffic monitoring system based on C/S mode to achieve automatic control, maintenance, and monitor network traffic, which is suitable for the current engineering software to monitor a network application environment. From the network users and network operator＇ s perspective, monitoring of network traffic is scientific, reasonable that improve network management and it has important research value.展开更多
In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise...In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise optimal design for water network is developed to simplify solution procedures for the formulated MINLP problem. In this paper, a feasible water reuse network framework is generated. Some heuristic rules from water reuse network are used to guide the placement of regeneration process. Then the outlet stream of regeneration process is considered as new water source. Regeneration reuse network structure is obtained through an iterative optimal procedure by taking the insights from reuse water network structure. Furthermore, regeneration recycle is only utilized to eliminate fresh water usage for processes in which regeneration reuse is impossible. Compared with the results obtained by relevant researches for the same example, the present method not only provides an appropriate regeneration reuse water network with minimum fresh water and regenerated water flow rate but also suggests a water network involving regeneration recycle with minimum recycle water flow rate. The design can utilize reuse, regeneration reuse and regeneration recycle step by step with minor water network structure change to achieve better flexibility. It can satisfy different demands for new plants and modernization of existing plants.展开更多
This paper introduces an adaptive traffic allocation scheme with cooperation of multiple Radio Access Networks (RANs) in universal wireless environments.The different cooperation scenarios are studied,and based on the...This paper introduces an adaptive traffic allocation scheme with cooperation of multiple Radio Access Networks (RANs) in universal wireless environments.The different cooperation scenarios are studied,and based on the scenario of cooperation in both network layer and terminal layer,an open queuing system model,which is aiming to depict the characteristics of packet loss rate of wireless communication networks,is proposed to optimize the traffic allocation results.The analysis and numerical simulations indicate that the proposed scheme achieves inter-networking load balance tominimize the whole transmission delay and expands the communication ability of single-mode terminals to support high data rate traffics.展开更多
Many Wireless Sensor Network (WSN) systems are deployed in unattended areas using non-rechargeable batteries.To enable sustainable operations,most WSN systems employ duty-cycling mechanisms,such as Low Power Listening...Many Wireless Sensor Network (WSN) systems are deployed in unattended areas using non-rechargeable batteries.To enable sustainable operations,most WSN systems employ duty-cycling mechanisms,such as Low Power Listening (LPL).For reliable delivery of each packet with LPL,the sender has to transmit a preamble that is long enough to span over a complete sleep interval of the receiver.In this way,the sensor nodes avoid idle listening,however,at the cost of remarkably increased end-to-end delay of multi-hop packet transmissions.To address this issue,in this paper we propose a new duty-cycling mechanism called DC-Gear.DC-Gear exploits a "sleep less but save more" phenomenon,which means increasing the duty cycle in a timely and appropriate manner whileminimizing the overall energy cost and satisfying the end-to-end delay constraint.We have implemented DC-Gear with TelosB motes and demonstrated its performance advantages through extensive experiments.展开更多
Thermal performance of a loop heat pipe with two evaporators and two condensers was examined using a lumped network model analysis. Thermosyphon-type vertical loop heat pipe and capillary-pump-type horizontal loop hea...Thermal performance of a loop heat pipe with two evaporators and two condensers was examined using a lumped network model analysis. Thermosyphon-type vertical loop heat pipe and capillary-pump-type horizontal loop heat pipe were calculated by examining the change of heating rate of two evaporators. Calculation results showed that the vapor and liquid flow rates in the loop heat pipe and the thermal conductance of the heat pipe changed significantly depending on the distribution ratio of the heating rate of the multiple evaporators. The thermal performance of the vertical loop heat pipe with two evaporators was also examined and experimental results of flow direction and thermal conductance of the heat pipe agreed with the analytical results. The lumped network model analysis is therefore considered accurate and preferable for the practical design of a loop heat pipe with multiple evaporators.展开更多
文摘This paper focuses on the key technologies of P2P and network traffic monitoring, research and analyze the traditional P2P flow control technology and the working principle of deployment, discuss on the straight loss and bypass interference control technology, and the reasonable combination of two kinds of technology to design straight bypass joint deployment. On basis of it, we design a new P2P traffic monitoring system. Through the design and implementation of computer network traffic monitoring system based on C/S mode to achieve automatic control, maintenance, and monitor network traffic, which is suitable for the current engineering software to monitor a network application environment. From the network users and network operator＇ s perspective, monitoring of network traffic is scientific, reasonable that improve network management and it has important research value.
基金Supported by the National Natural Science Foundation of China(20906007)
文摘In order to take full advantage of regeneration process to reduce fresh water consumption and avoid the accumulation of trace contaminants, regeneration reuse and regeneration recycle should be distinctive. A stepwise optimal design for water network is developed to simplify solution procedures for the formulated MINLP problem. In this paper, a feasible water reuse network framework is generated. Some heuristic rules from water reuse network are used to guide the placement of regeneration process. Then the outlet stream of regeneration process is considered as new water source. Regeneration reuse network structure is obtained through an iterative optimal procedure by taking the insights from reuse water network structure. Furthermore, regeneration recycle is only utilized to eliminate fresh water usage for processes in which regeneration reuse is impossible. Compared with the results obtained by relevant researches for the same example, the present method not only provides an appropriate regeneration reuse water network with minimum fresh water and regenerated water flow rate but also suggests a water network involving regeneration recycle with minimum recycle water flow rate. The design can utilize reuse, regeneration reuse and regeneration recycle step by step with minor water network structure change to achieve better flexibility. It can satisfy different demands for new plants and modernization of existing plants.
基金supported by the National Natural Science Foundation of China under Grant No.60971125National Major Project under Grant No.2011ZX03003-003-01
文摘This paper introduces an adaptive traffic allocation scheme with cooperation of multiple Radio Access Networks (RANs) in universal wireless environments.The different cooperation scenarios are studied,and based on the scenario of cooperation in both network layer and terminal layer,an open queuing system model,which is aiming to depict the characteristics of packet loss rate of wireless communication networks,is proposed to optimize the traffic allocation results.The analysis and numerical simulations indicate that the proposed scheme achieves inter-networking load balance tominimize the whole transmission delay and expands the communication ability of single-mode terminals to support high data rate traffics.
基金supported by the National Basic Research Program of China(Grant No.2011CB302705)the National Natural Science Fourdation of China(60970123)
文摘Many Wireless Sensor Network (WSN) systems are deployed in unattended areas using non-rechargeable batteries.To enable sustainable operations,most WSN systems employ duty-cycling mechanisms,such as Low Power Listening (LPL).For reliable delivery of each packet with LPL,the sender has to transmit a preamble that is long enough to span over a complete sleep interval of the receiver.In this way,the sensor nodes avoid idle listening,however,at the cost of remarkably increased end-to-end delay of multi-hop packet transmissions.To address this issue,in this paper we propose a new duty-cycling mechanism called DC-Gear.DC-Gear exploits a "sleep less but save more" phenomenon,which means increasing the duty cycle in a timely and appropriate manner whileminimizing the overall energy cost and satisfying the end-to-end delay constraint.We have implemented DC-Gear with TelosB motes and demonstrated its performance advantages through extensive experiments.
文摘Thermal performance of a loop heat pipe with two evaporators and two condensers was examined using a lumped network model analysis. Thermosyphon-type vertical loop heat pipe and capillary-pump-type horizontal loop heat pipe were calculated by examining the change of heating rate of two evaporators. Calculation results showed that the vapor and liquid flow rates in the loop heat pipe and the thermal conductance of the heat pipe changed significantly depending on the distribution ratio of the heating rate of the multiple evaporators. The thermal performance of the vertical loop heat pipe with two evaporators was also examined and experimental results of flow direction and thermal conductance of the heat pipe agreed with the analytical results. The lumped network model analysis is therefore considered accurate and preferable for the practical design of a loop heat pipe with multiple evaporators.
