The mechanical properties of the Zr52.5Cu17.9Ni14.6Al10Ti5 alloy were presented, with an emphasis on the strain rate effect and presence of crystalline inclusions on the deformation and fracture mechanisms. X-ray diff...The mechanical properties of the Zr52.5Cu17.9Ni14.6Al10Ti5 alloy were presented, with an emphasis on the strain rate effect and presence of crystalline inclusions on the deformation and fracture mechanisms. X-ray diffraction studies indicated fully amorphous alloy structures with lower oxygen contents and partial crystalline structures at higher oxygen levels;however, completely different compressive deformation behaviour was observed. Uniaxial compression tests of the fully amorphous alloy showed elastic deformation, followed by yielding, distinct plastic deformation and serration flow behaviour. An increase in strain rate from 1×10-4 to 1×10-2 s-1 did not affect the yield strength;however, it decreased the compressive fracture strength and reduced the plastic strain. Scanning electron microscopy (SEM) observations with energy dispersive spectroscopy (EDS) analysis showed that the intermetallic CuZr2 phase was present even in the low oxygen content alloy, leading to lower fracture strength and ductility loss. For the high oxygen level samples, the presence of the dendritic Zr51Cu28Al21 phase was confirmed, leading to fracture strength impairment. The difference between ductile and brittle samples has been reflected on the fracture surfaces. The higher the plastic strain was, the higher the density of shear bands forming during deformation manifested by a serration flow behaviour on stress-strain curves.展开更多
基金supported by Ministry of Science and Higher Education Republic of Poland under contract No.11.11.110.299
文摘The mechanical properties of the Zr52.5Cu17.9Ni14.6Al10Ti5 alloy were presented, with an emphasis on the strain rate effect and presence of crystalline inclusions on the deformation and fracture mechanisms. X-ray diffraction studies indicated fully amorphous alloy structures with lower oxygen contents and partial crystalline structures at higher oxygen levels;however, completely different compressive deformation behaviour was observed. Uniaxial compression tests of the fully amorphous alloy showed elastic deformation, followed by yielding, distinct plastic deformation and serration flow behaviour. An increase in strain rate from 1×10-4 to 1×10-2 s-1 did not affect the yield strength;however, it decreased the compressive fracture strength and reduced the plastic strain. Scanning electron microscopy (SEM) observations with energy dispersive spectroscopy (EDS) analysis showed that the intermetallic CuZr2 phase was present even in the low oxygen content alloy, leading to lower fracture strength and ductility loss. For the high oxygen level samples, the presence of the dendritic Zr51Cu28Al21 phase was confirmed, leading to fracture strength impairment. The difference between ductile and brittle samples has been reflected on the fracture surfaces. The higher the plastic strain was, the higher the density of shear bands forming during deformation manifested by a serration flow behaviour on stress-strain curves.
