基于陶瓷图像变形算法的研究与应用

图像变形技术是将一副图像平滑自然地变换到另一幅图像的方法,主要通过源图像与目标图像的映射关系计算出源图像中像素点在目标图像中的坐标,最终实现图像的变形.阐述了图像变形的相关概念和方法,并给出了球面变形和椭圆变形的算法理论.

Critical Behavior in Nuclear Structure from Spherical to γ-Soft Deformed Shape in IBM

Comparing with the predictions of the transitional dynamical symmetry E（5） proposed by Iachello [Phys. Rev. Lett. 85 （2000） 3580], the critical behaviors from U（5）-0（6） are studied in the space of two control parameters in the interacting boson model. A simple shape phase diagram has been presented. It is found that E（5） predictions cannot be exactly reproduced by our calculations and that the best agreement is close to the calculations with boson number N = 9. By comparing with experimental data on E（5）-like nuclei, we find that E（5） predictions and IBM calculations can reproduce the energy ratios and E2 transition ones.

Effect of prestressed ultrasonic peen forming parameters on bending curvature and spherical deformation of plate

The elastic prestressed ultrasonic peen forming(UPF)was adopted in order to solve problems of insufficient bending deformation and large spherical deformation of plate during free UPF.The theoretical analysis of prestressed UPF and the influence of elastic prebending moment on deformation were analyzed.Spherical deformation coefficient was defined to quantificationally describe the spherical deformation.Experiments were conducted to compare the differences between free UPF and prestressed UPF processes and the effects of processing parameters on bending curvature and spherical deformation coefficient were studied.The results show that peening trajectory in chordwise direction is beneficial to enlarging spanwise bending deformation and decreasing spherical deformation coefficient.Large prebending curvature is helpful to increase spanwise bending deformation and decrease chordwise deformation,thereby obviously decreasing spherical deformation coefficient.Large spanwise deformation can be obtained under large firing pin velocity,small plate thickness and small offset distance.Large firing pin velocity plays a positive role in decreasing spherical deformation,while plate thickness and offset distance have little effect on it.Above all,prebending curvature and peening trajectory are the most important factors during prestressed UPF process.This study provides guidance for parameters optimization of prestressed UPF for wing plate with large thickness.

Hot tensile deformation behavior and globularization mechanism of bimodal microstructured Ti-6Al-2Zr-1Mo-1V alloy

The hot deformation behavior,microstructure evolution and fracture characteristics of bimodal microstructured Ti-6Al-2Zr-1Mo-1V alloy were investigated by isothermal tensile tests.Results reveal that flow softening is caused by dynamic globularization of the bimodal microstructure,which also results in a relatively high stress exponent and thermal activation energy.The corresponding SEM,EBSD and TEM observations indicate that the dynamic globularization at750and800℃is accomplished by the formation ofα/αsub-grain boundary and penetration of theβphase.However,dynamic recrystallization(DRX)is the main globularization mechanism at850℃,which was proved by the generation of fine grains with a necklace-like character due to the transformation of low-angle boundaries(LABs)into high-angle boundaries(HABs).With an increase in the deformation temperature or a decrease in the strain rate,the fracture mechanism changes from microvoid coalescence to intergranular fracture.

Severe plastic deformation of commercially pure aluminum using novel equal channel angular expansion extrusion with spherical cavity

Equal channel angular expansion extrusion with spherical cavity(ECAEE-SC)was introduced as a novel severe plastic deformation(SPD)technique,which is capable of imposing large plastic strain and intrinsic back-pressure on the processed billet.The plastic deformation behaviors of commercially pure aluminum during ECAEE-SC process were investigated using finite element analysis DEFORM-3D simulation software.The material flow,the load history,the distribution of effective strain and mean stress in the billet were analyzed in comparison with conventional equal channel angular extrusion(ECAE)process.In addition,single-pass ECAEE-SC was experimentally conducted on commercially pure aluminum at room temperature for validation,and the evolution of microstructure and microhardness of as-processed material was discussed.It was shown that during the process,the material is in the ideal hydrostatic stress state and the load requirement for ECAEE-SC is much more than that for ECAE.After a single-pass ECAEE-SC,an average strain of 3.51 was accumulated in the billet with homogeneous distribution.Moreover,the microstructure was significantly refined and composed of equiaxed ultrafine grains with sub-micron size.Considerable improvement in the average microhardness of aluminum was also found,which was homogenized and increased from HV 36.61 to HV 70.20,denoting 91.75%improvement compared with that of the as-cast billet.

Analytical models for circular and spherical dielectric elastomers

In order to imitate skin characteristics, a dielectric elastomer (DE) membrane coated with flexible electrodes is applied with high voltage, which can lead to wrinkles and other phenomena. To develop soft-actuated air vehicles and other equipment, lightweight gas is pumped into a DE spherical shell to generate controllable flight movements. According to experimental phenomena and data, the calculation models of phase transitions on circular DE films are built. Meanwhile, the deformation characteristics of different DE (acrylic polymer and rubber) spherical actuators combined with helium are compared. The peak pressure inside a rubber balloon is greater than that of a VHB (acrylic polymer) balloon shell, but the limit stretch of rubber is much smaller. By taking advantages of this phenomenon, large deformations of a VHB spherical shell can be realized at an actuated state. Moreover, multi-layer spherical DE shells can achieve larger voltage-induced volume change than monolayer ones. The research indicates that pre-stretching is one of the key factors to induce phase transitions between flat, wrinkled and bulging regions on circular DE films, and the internal pressure determines the electromechanical performance of balloon actuators.