期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
受限空间瓦斯爆炸冲击波压力信号小波包去噪研究 被引量:7
1
作者 高科 刘剑 +2 位作者 刘玉姣 李鹏 张猛 《中国安全生产科学技术》 CAS CSCD 2014年第12期17-22,共6页
由于受限空间瓦斯爆炸冲击波压力信号具有突变性和瞬态非平稳性特点,采用小波包分析进行去噪处理。选取典型的Daubechies小波包系和Symlets小波包系各小波包基对信号的重构均方根误差,并计算了原始信号与重构信号的相关系数,确定Sym8为... 由于受限空间瓦斯爆炸冲击波压力信号具有突变性和瞬态非平稳性特点,采用小波包分析进行去噪处理。选取典型的Daubechies小波包系和Symlets小波包系各小波包基对信号的重构均方根误差,并计算了原始信号与重构信号的相关系数,确定Sym8为处理瓦斯爆炸冲击波压力信号的最佳小波包基。去噪结果显示:小波包分析在降低噪声的同时,仍然保留信号突变部分的信息,能尽可能不失真得重现有效信号,受限空间瓦斯爆炸冲击波压力信号小波包去噪能够得到更可靠地结果。 展开更多
关键词 受限空间瓦斯爆炸冲击波 小波包分析 信号去噪
下载PDF
巷道空间内瓦斯爆炸冲击波传播的数值模拟 被引量:7
2
作者 朱邵飞 叶青 +3 位作者 李贺 贾真真 沈子鹤 杨卓华 《矿业工程研究》 2019年第3期23-30,共8页
为研究在巷道空间里瓦斯爆炸冲击波的传播特性,采用ANSYS/LS-DYNA程序的流固耦合算法,建立巷道瓦斯爆炸物理模型,对巷道空间里瓦斯爆炸过程进行数值模拟,得到瓦斯爆炸过程中冲击波变化云图,并拟合了冲击波衰减变化规律.研究表明:瓦斯爆... 为研究在巷道空间里瓦斯爆炸冲击波的传播特性,采用ANSYS/LS-DYNA程序的流固耦合算法,建立巷道瓦斯爆炸物理模型,对巷道空间里瓦斯爆炸过程进行数值模拟,得到瓦斯爆炸过程中冲击波变化云图,并拟合了冲击波衰减变化规律.研究表明:瓦斯爆炸冲击波经历了从球面到平面冲击波的发展过程,最终冲击波逐渐衰减为常压状态,但在受限空间内瓦斯爆炸冲击波遇壁面会发生反射与叠加,因此要合理的设置泄压口;爆炸冲击波超压与距离成非线性关系,即爆炸冲击波超压与距离的平方根成反比.研究结果对瓦斯爆炸传播事故的预防和灾害控制有一定的指导作用. 展开更多
关键词 巷道空间 瓦斯爆炸冲击波 数值模拟 超压
下载PDF
Mechanism research of gas and coal dust explosion 被引量:1
3
作者 ZHANG Yan-song HAN Li-li WANG Lei 《Journal of Coal Science & Engineering(China)》 2009年第2期171-174,共4页
Combined with the experimental results from the large tunnel of the ChongqingResearch Institute,the mechanism of gas and coal dust explosion was studied.Someconcepts about gas and coal dust explosion were introduced s... Combined with the experimental results from the large tunnel of the ChongqingResearch Institute,the mechanism of gas and coal dust explosion was studied.Someconcepts about gas and coal dust explosion were introduced such as the form conditionand influential factors.Gas and coal dust explosion propagation was researched and thelifting process of coal dust was simulated.When an explosion occurred due to great mixtureof gas and air,the maximum explosion pressure appeared in the neighborhood of theexplosion source point.Before it propagated to the tunnel of the deposited coal dust,themaximum explosion pressure appeared to be in declining trend.Part of the energy waslost in the process of raising the deposited coal dust through a shock wave,so the maximumexplosion pressure was smallest on the foreside of the deposited coal dust sector.On the deposited coal dust sector,the explosion pressure rapidly increased and droppedoff after achieving the largest peak value.Because of coal dust participation in the explosion,the flame velocity rose rapidly on the deposited coal dust and achieved a basic stablevalue;coal dust was ignited to explode by initial laminar flame,and the laminar flametransformed into turbulent flame.The turbulence transformed the flame fold into a funnelshape and the shock wave interacted with the flame,so the combustion rate rose and thepressure wave was further enhanced.The regeneration mechanism between the flamecombustion rate and the aerodynamic flowing structure achieved the final critical state forforming the detonation. 展开更多
关键词 gas and coal dust explosion mechanism research influence factor coal dust hoisted process
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部