复合材料推力轴承设计与制造研究

文章首先对复合材料瓦面推力轴承的设计思路进行了分析;其后,围绕干燥处理、材料拌合、加压制造等环节,研究了复合材料瓦面推力轴承的制造工艺;最后,从瓦面进油机制、瓦面结构造型两个角度入手,提出了复合材料瓦面推力轴承设计与制造的把控要点。

Study on the outburst prone of different fault sides

Most outbursts of gas and coal occur along geological structural zones during mining. Recent research revealed that most outbursts occurred on the downthrow sides of faults, and the key reason is that the outburst coal,often known as tectonic coal or soft coal, mainly exists on the downthrow wall of faults-hanging of normal faults or footwall of reverse faults. This paper will mainly discuss the outburst prone on different sides of faults and its causes.

Fracture evolution and pressure relief gas drainage from distant protected coal seams under an extremely thick key stratum

When an extremely thick rock bed exists above a protected coal seam in the bending zone given the condition of a mining protective seam, this extremely thick rock bed controls the movement of the entire overlying stratum. This extremely thick rock bed, called a ＂main key stratum＂, will not subside nor break for a long time, causing lower fractures and bed separations not to close and gas can migrate to the bed separation areas along the fractures. These bed separations become gas enrichment areas. By analyzing the rule of fracture evolution and gas migration under the main key stratum after the deep protective coal seam has been mined, we propose a new gas drainage method which uses bore holes, drilled through rock and coal seams at great depths for draining pressure relief gas. In this method, the bores are located at a high level suction roadway （we can also drill them in the drilling field located high in an air gateway）. Given the practice in the Haizi mine, the gas drainage rate can reach 73% in the middie coal group, with a gas drainage radius over 100 m.

Research into comprehensive gas extraction technology of single coal seams with low permeability in the Jiaozuo coal mining area

For a low permeability single coal seam prone to gas outbursts, pre-drainage of gas is difficult and inefficient, seriously restricting the safety and efficiency of production. Radical measures of increasing gas extraction efficiency are pressure relief and infrared antireflection. We have analyzed the effect of mining conditions and the regularity of mine pressure distribution in front of the working face of a major coal mine of the Jiaozuo Industrial （Group） Co. as our test area, studied the width of the depressurization zone in slice mining and analyzed gas efficiency and fast drainage in the advanced stress relaxation zone. On that basis, we further investigated and practiced the exploitation technology of shallow drilling, fan dril- ling and grid shape drilling at the working face. Practice and our results show that the stress relaxation zone is the ideal region for quick and efficient extraction of gas. By means of an integrated extraction technology, the amount of gas emitted into the zone was greatly reduced, while the risk of dangerous outbursts of coal and gas was lowered markedly. This exploration provides a new way to control for gas in working faces of coal mines with low permeability and risk of gas outbursts of single coal seams in the Jiaozuo mining area.

Application of deep borehole blasting on fully mechanized hard top-coal pre-splitting and gas extraction in the special thick seam

In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas pre-draining technologies on top coal.The mechanism of the technologies was systematically expounded based on hard top-coal cracks development obtained by numerical simulation and theoretical analysis.The results show that explosive blasting in the hard rock results in a large number of cracks and large displacement in the rock mass due to the effect of explosion stress.Meanwhile,the thick top-coal caves,and desorbing gas flows along the cracks improve gas extraction.Finally,the pre-splitting for deep borehole blasting and gas pre-draining technologies was applied in No.3802 working face of Shui Liandong Coal Mine,which increases monthly output in the face to 67.34 kt and the drained gas concentration to 86.2%.The drained gas average concentration from each borehole reaches 40%,and the effect is remarkable.

Theory and application of infrared surveying gas gushing technology in coal-rock roadway

Geological structure and gas expansion when gas pressure was released can affect the distribution of infrared radiation energy or temperature at coal rock surface. From this, the foundation of roadway infrared surveying technical was formed. According to the thermodynamic principle of ideal gas and the law of energy conservation, the relation was established between gas gushing amount from coal rock and air temperature to fall in roadway. At the same time, this paper has analyzed coal rock density change that geological structure aroused and the change exerted influences on infrared radiation power at surface, as well as, has analyzed the infrared radiation feature of gas gushing at geological structure district. Application results show that infrared survey technology can be used to analyze and forecast the change of coal rock gas gushing effectively, and to guide the enforcement of the roadway gas project of prevention and handling economically.