In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches...In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.展开更多
The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstruct...The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.展开更多
文摘In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (20040425007)
文摘The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.
